4,543 research outputs found
Proactive Highly Ambulatory Sensor Routing (PHASeR) protocol for mobile wireless sensor networks
This paper presents a novel multihop routing protocol for mobile wireless sensor networks called PHASeR (Proactive Highly Ambulatory Sensor Routing). The proposed protocol
uses a simple hop-count metric to enable the dynamic and robust routing of data towards the sink in mobile environments. It is motivated by the application of radiation mapping by unmanned vehicles, which requires the reliable and timely delivery of regular measurements to the sink. PHASeR maintains a gradient metric in mobile environments by using a global TDMA MAC layer. It also uses the technique of blind forwarding to pass messages through the network in a multipath manner. PHASeR is analysed mathematically based on packet delivery ratio, average packet delay, throughput and overhead. It is then simulated with varying mobility, scalability and traffic loads. The protocol gives good results over all measures, which suggests that it may also be suitable for a wider array of emerging applications
Design and analysis of a beacon-less routing protocol for large volume content dissemination in vehicular ad hoc networks
Largevolumecontentdisseminationispursuedbythegrowingnumberofhighquality applications for Vehicular Ad hoc NETworks(VANETs), e.g., the live road surveillance service and the video-based overtaking assistant service. For the highly dynamical vehicular network topology, beacon-less routing protocols have been proven to be efficient in achieving a balance between the system performance and the control overhead. However, to the authors’ best knowledge, the routing design for large volume content has not been well considered in the previous work, which will introduce new challenges, e.g., the enhanced connectivity requirement for a radio link. In this paper, a link Lifetime-aware Beacon-less Routing Protocol (LBRP) is designed for large volume content delivery in VANETs. Each vehicle makes the forwarding decision based on the message header information and its current state, including the speed and position information. A semi-Markov process analytical model is proposed to evaluate the expected delay in constructing one routing path for LBRP. Simulations show that the proposed LBRP scheme outperforms the traditional dissemination protocols in providing a low end-to-end delay. The analytical model is shown to exhibit a good match on the delay estimation with Monte Carlo simulations, as well
Performance Modelling and Optimisation of Multi-hop Networks
A major challenge in the design of large-scale networks is to predict and optimise the
total time and energy consumption required to deliver a packet from a source node to a
destination node. Examples of such complex networks include wireless ad hoc and sensor
networks which need to deal with the effects of node mobility, routing inaccuracies, higher
packet loss rates, limited or time-varying effective bandwidth, energy constraints, and the
computational limitations of the nodes. They also include more reliable communication
environments, such as wired networks, that are susceptible to random failures, security
threats and malicious behaviours which compromise their quality of service (QoS) guarantees.
In such networks, packets traverse a number of hops that cannot be determined
in advance and encounter non-homogeneous network conditions that have been largely
ignored in the literature. This thesis examines analytical properties of packet travel in
large networks and investigates the implications of some packet coding techniques on both
QoS and resource utilisation.
Specifically, we use a mixed jump and diffusion model to represent packet traversal
through large networks. The model accounts for network non-homogeneity regarding
routing and the loss rate that a packet experiences as it passes successive segments of a
source to destination route. A mixed analytical-numerical method is developed to compute
the average packet travel time and the energy it consumes. The model is able to capture
the effects of increased loss rate in areas remote from the source and destination, variable
rate of advancement towards destination over the route, as well as of defending against
malicious packets within a certain distance from the destination. We then consider sending
multiple coded packets that follow independent paths to the destination node so as to
mitigate the effects of losses and routing inaccuracies. We study a homogeneous medium
and obtain the time-dependent properties of the packet’s travel process, allowing us to
compare the merits and limitations of coding, both in terms of delivery times and energy
efficiency. Finally, we propose models that can assist in the analysis and optimisation
of the performance of inter-flow network coding (NC). We analyse two queueing models
for a router that carries out NC, in addition to its standard packet routing function. The
approach is extended to the study of multiple hops, which leads to an optimisation problem
that characterises the optimal time that packets should be held back in a router, waiting
for coding opportunities to arise, so that the total packet end-to-end delay is minimised
Energy-delay bounds analysis in wireless multi-hop networks with unreliable radio links
Energy efficiency and transmission delay are very important parameters for
wireless multi-hop networks. Previous works that study energy efficiency and
delay are based on the assumption of reliable links. However, the unreliability
of the channel is inevitable in wireless multi-hop networks. This paper
investigates the trade-off between the energy consumption and the end-to-end
delay of multi-hop communications in a wireless network using an unreliable
link model. It provides a closed form expression of the lower bound on the
energy-delay trade-off for different channel models (AWGN, Raleigh flat fading
and Nakagami block-fading) in a linear network. These analytical results are
also verified in 2-dimensional Poisson networks using simulations. The main
contribution of this work is the use of a probabilistic link model to define
the energy efficiency of the system and capture the energy-delay trade-offs.
Hence, it provides a more realistic lower bound on both the energy efficiency
and the energy-delay trade-off since it does not restrict the study to the set
of perfect links as proposed in earlier works
- …