A survey on power management strategies of hybrid energy systems in microgrid

The power generation through renewable energy resources is increasing vastly, Solar energy and Wind Energy are the most abundantly available renewable energy resources. The growth of small scale distributed grid networks increasing rapidly in the modern power systems and Distributed Generation (DG) plays a predominant role. Microgrid is one among the emerging techniques in power systems. Power Management is mainly required to have control over the real and reactive power of individual DG and for smooth operation, maintaining stability and reliability. This paper presents a survey of the research works already reported focusing on power management of hybrid energy systems such as mainly solar and wind systems in microgrid. Six different approaches have been studied in detail for AC,DC and hybrid AC/DC microgrid

An Investigation into the Performance Evaluation of Connected Vehicle Applications: From Real-World Experiment to Parallel Simulation Paradigm

A novel system was developed that provides drivers lane merge advisories, using vehicle trajectories obtained through Dedicated Short Range Communication (DSRC). It was successfully tested on a freeway using three vehicles, then targeted for further testing, via simulation. The failure of contemporary simulators to effectively model large, complex urban transportation networks then motivated further research into distributed and parallel traffic simulation. An architecture for a closed-loop, parallel simulator was devised, using a new algorithm that accounts for boundary nodes, traffic signals, intersections, road lengths, traffic density, and counts of lanes; it partitions a sample, Tennessee road network more efficiently than tools like METIS, which increase interprocess communications (IPC) overhead by partitioning more transportation corridors. The simulator uses logarithmic accumulation to synchronize parallel simulations, further reducing IPC. Analyses suggest this eliminates up to one-third of IPC overhead incurred by a linear accumulation model

Assessing the effectiveness of managed lane strategies for the rapid deployment of cooperative adaptive cruise control technology

Connected and Automated Vehicle (C/AV) technologies are fast expanding in the transportation and automotive markets. One of the highly researched examples of C/AV technologies is the Cooperative Adaptive Cruise Control (CACC) system, which exploits various vehicular sensors and vehicle-to-vehicle communication to automate vehicular longitudinal control. The operational strategies and network-level impacts of CACC have not been thoroughly discussed, especially in near-term deployment scenarios where Market Penetration Rate (MPR) is relatively low. Therefore, this study aims to assess CACC\u27s impacts with a combination of managed lane strategies to provide insights for CACC deployment. The proposed simulation framework incorporates 1) the Enhanced Intelligent Driver Model; 2) Nakagami-based radio propagation model; and 3) a multi-objective optimization (MOOP)-based CACC control algorithm. The operational impacts of CACC are assessed under four managed lane strategies (i.e., mixed traffic (UML), HOV (High Occupancy Vehicle)-CACC lane (MML), CACC dedicated lane (DL), and CACC dedicated lane with access control (DLA)). Simulation results show that the introduction of CACC, even with 10% MPR, is able to improve the network throughput by 7% in the absence of any managed lane strategies. The segment travel times for both CACC and non-CACC vehicles are reduced. The break-even point for implementing dedicated CACC lane is 30% MPR, below which the priority usage of the current HOV lane for CACC traffic is found to be more appropriate. It is also observed that DLA strategy is able to consistently increase the percentage of platooned CACC vehicles as MPR grows. The percentage of CACC vehicles within a platoon reaches 52% and 46% for DL and DLA, respectively. When it comes to the impact of vehicle-to-vehicle (V2V), it is found that DLA strategy provides more consistent transmission density in terms of median and variance when MPR reaches 20% or above. Moreover, the performance of the MOOP-based cooperative driving is examined. With average 75% likelihood of obtaining a feasible solution, the MOOP outperforms its counterpart which aims to minimize the headway objective solely. In UML, MML, and DL strategy, the proposed control algorithm achieves a balance spread among four objectives for each CACC vehicle. In the DLA strategy, however, the probability of obtaining feasible solution falls to 60% due to increasing size of platoon owing to DLA that constraints the feasible region by introduction more dimensions in the search space. In summary, UML or MML is the preferred managed lane strategy for improving traffic performance when MPR is less than 30%. When MRP reaches 30% or above, DL and DLA could improve the CACC performance by facilitating platoon formation. If available, priority access to an existing HOV lane can be adopted to encourage adaptation of CACC when CACC technology becomes publically available

Planning and Operation Framework of Smart Distributed Energy Resources in Emerging Distribution Systems

Smart grid technologies provoke a major paradigm shift in how power systems are planned and operated. The transition to a smarter system is happening gradually; however, researchers has reported that this transition is dealt with generally in a "react and provide" manner. Proper planning studies allow for this transition to be done in a predict and provide" fashion. Part of planning this transition is envisioning the future system. Technical, social, environmental, and economical challenges are foreseen and tackled in the literature; however, no generalized planning framework that addresses the overall picture of different involved parties' interests and their anticipated (and often conflicting) interactions to properly plan for a better and fair outcome has been developed. This work addresses the issue in several steps: 1) it provides a backbone framework architecture for asset sizing and allocation in the future Smart Distribution System (SDS), 2) it considers the daily optimal operation of these assets in the long-term planning problem, and 3) it considers the potential conflicts that happen on the long-term planning level and operational levels. This architecture requires the development of a framework capable of absorbing private investments, integrating new technologies, promoting smart grid applications, and yet remaining feasible to all involved parties. Strategic analysis of the involvement of each stakeholder has been conducted. Proceeding from this analysis, deductions and conclusions about venues for promoting and allowing a smoother transition to the new paradigm are drawn. In addition, this analysis highlighted potential conflicts that are showcased in two different case studies. Potential ways in which the conditions affect the planning procedure and how they can be overcome are proposed. The recommendations can be highlighted as follows: 1) promoting new smart grid technologies, 2) encouraging communications and cooperation between involved parties, 3) considering daily optimal operation of assets to fully take advantage of their new active nature to better allocate them in the long-term planning problem, and 4) consideration of stakeholders interests in the planning phase in order to better absorb investments and move to the new paradigm. To size and allocate assets in the long-term planning problem for the SDS, first a building algorithm has been developed to size and allocate DG units. This algorithm breaks the problem into two subproblems to overcome the modeling and computational challenges of the mixed-integer nonlinear programming problem. The first subproblem is addressed using heuristic optimization techniques, namely a genetic algorithm, and the second involving deterministic analytical means of nonlinear optimization, utilizing the advancements made in branch-and-bound methods providing a proven global optimal solution to non-convex problems. Considering the daily optimal operation and both electric utilities' and investors' objectives, the planning problem has been developed. The results show greater private investments absorption, reduced costs to both parties, and higher system performance due to lowered energy losses. The expected increased numbers of customers opting to become resilient and have a more reliable service pose several operational and planning challenges. In this work, a novel consensus-based algorithm is introduced as an economically efficient tool for coordinating prosumers' interactions, within the feasible solution region. Several objectives are targeted in this work, among which the global economic benefit maximization of all interacting prosumers is the most salient. This economic benefit comprises the total cooperative payoff of the interacting prosumers. Each prosumer has its own private bounds defining the range of power production and consumption. A novel definition is proposed for prosumers' interaction in the hybrid microgrids. The developed scheme's importance stems from the dramatic change in the smart networks' paradigms. In addition, the individual prosumers' preferences are recognized via the comprehensive mathematical modeling for the evolved AC/DC network. The results are provided for a basic two-prosumer scenario. However, these results highlight the potential of the proposed approach in a practical system setting. More sophisticated case studies, i.e., multi-power levels, multi-prosumers, and different system topologies, could be also studied using the proposed work

Interoperability of Traffic Infrastructure Planning and Geospatial Information Systems

Building Information Modelling (BIM) as a Model-based design facilitates to investigate multiple solutions in the infrastructure planning process. The most important reason for implementing model-based design is to help designers and to increase communication between different design parties. It decentralizes and coordinates team collaboration and facilitates faster and lossless project data exchange and management across extended teams and external partners in project lifecycle. Infrastructure are fundamental facilities, services, and installations needed for the functioning of a community or society, such as transportation, roads, communication systems, water and power networks, as well as power plants. Geospatial Information Systems (GIS) as the digital representation of the world are systems for maintaining, managing, modelling, analyzing, and visualizing of the world data including infrastructure. High level infrastructure suits mostly facilitate to analyze the infrastructure design based on the international or user defined standards. Called regulation1-based design, this minimizes errors, reduces costly design conflicts, increases time savings and provides consistent project quality, yet mostly in standalone solutions. Tasks of infrastructure usually require both model based and regulation based design packages. Infrastructure tasks deal with cross-domain information. However, the corresponding data is split in several domain models. Besides infrastructure projects demand a lot of decision makings on governmental as well as on private level considering different data models. Therefore lossless flow of project data as well as documents like regulations across project team, stakeholders, governmental and private level is highly important. Yet infrastructure projects have largely been absent from product modelling discourses for a long time. Thus, as will be explained in chapter 2 interoperability is needed in infrastructure processes. Multimodel (MM) is one of the interoperability methods which enable heterogeneous data models from various domains get bundled together into a container keeping their original format. Existing interoperability methods including existing MM solutions can’t satisfactorily fulfill the typical demands of infrastructure information processes like dynamic data resources and a huge amount of inter model relations. Therefore chapter 3 concept of infrastructure information modelling investigates a method for loose and rule based coupling of exchangeable heterogeneous information spaces. This hypothesis is an extension for the existing MM to a rule-based Multimodel named extended Multimodel (eMM) with semantic rules – instead of static links. The semantic rules will be used to describe relations between data elements of various models dynamically in a link-database. Most of the confusion about geospatial data models arises from their diversity. In some of these data models spatial IDs are the basic identities of entities and in some other data models there are no IDs. That is why in the geospatial data, data structure is more important than data models. There are always spatial indexes that enable accessing to the geodata. The most important unification of data models involved in infrastructure projects is the spatiality. Explained in chapter 4 the method of infrastructure information modelling for interoperation in spatial domains generate interlinks through spatial identity of entities. Match finding through spatial links enables any kind of data models sharing spatial property get interlinked. Through such spatial links each entity receives the spatial information from other data models which is related to the target entity due to sharing equivalent spatial index. This information will be the virtual properties for the object. The thesis uses Nearest Neighborhood algorithm for spatial match finding and performs filtering and refining approaches. For the abstraction of the spatial matching results hierarchical filtering techniques are used for refining the virtual properties. These approaches focus on two main application areas which are product model and Level of Detail (LoD). For the eMM suggested in this thesis a rule based interoperability method between arbitrary data models of spatial domain has been developed. The implementation of this method enables transaction of data in spatial domains run loss less. The system architecture and the implementation which has been applied on the case study of this thesis namely infrastructure and geospatial data models are described in chapter 5. Achieving afore mentioned aims results in reducing the whole project lifecycle costs, increasing reliability of the comprehensive fundamental information, and consequently in independent, cost-effective, aesthetically pleasing, and environmentally sensitive infrastructure design.:ABSTRACT 4 KEYWORDS 7 TABLE OF CONTENT 8 LIST OF FIGURES 9 LIST OF TABLES 11 LIST OF ABBREVIATION 12 INTRODUCTION 13 1.1. A GENERAL VIEW 14 1.2. PROBLEM STATEMENT 15 1.3. OBJECTIVES 17 1.4. APPROACH 18 1.5. STRUCTURE OF THESIS 18 INTEROPERABILITY IN INFRASTRUCTURE ENGINEERING 20 2.1. STATE OF INTEROPERABILITY 21 2.1.1. Interoperability of GIS and BIM 23 2.1.2. Interoperability of GIS and Infrastructure 25 2.2. MAIN CHALLENGES AND RELATED WORK 27 2.3. INFRASTRUCTURE MODELING IN GEOSPATIAL CONTEXT 29 2.3.1. LamdXML: Infrastructure Data Standards 32 2.3.2. CityGML: Geospatial Data Standards 33 2.3.3. LandXML and CityGML 36 2.4. INTEROPERABILITY AND MULTIMODEL TECHNOLOGY 39 2.5. LIMITATIONS OF EXISTING APPROACHES 41 INFRASTRUCTURE INFORMATION MODELLING 44 3.1. MULTI MODEL FOR GEOSPATIAL AND INFRASTRUCTURE DATA MODELS 45 3.2. LINKING APPROACH, QUERYING AND FILTERING 48 3.2.1. Virtual Properties via Link Model 49 3.3. MULTI MODEL AS AN INTERDISCIPLINARY METHOD 52 3.4. USING LEVEL OF DETAIL (LOD) FOR FILTERING 53 SPATIAL MODELLING AND PROCESSING 58 4.1. SPATIAL IDENTIFIERS 59 4.1.1. Spatial Indexes 60 4.1.2. Tree-Based Spatial Indexes 61 4.2. NEAREST NEIGHBORHOOD AS A BASIC LINK METHOD 63 4.3. HIERARCHICAL FILTERING 70 4.4. OTHER FUNCTIONAL LINK METHODS 75 4.5. ADVANCES AND LIMITATIONS OF FUNCTIONAL LINK METHODS 76 IMPLEMENTATION OF THE PROPOSED IIM METHOD 77 5.1. IMPLEMENTATION 78 5.2. CASE STUDY 83 CONCLUSION 89 6.1. SUMMERY 90 6.2. DISCUSSION OF RESULTS 92 6.3. FUTURE WORK 93 BIBLIOGRAPHY 94 7.1. BOOKS AND PAPERS 95 7.2. WEBSITES 10