A Contextual Fire Detection Algorithm for Simulated HJ-1B Imagery

The HJ-1B satellite, which was launched on September 6, 2008, is one of the small ones placed in the constellation for disaster prediction and monitoring. HJ-1B imagery was simulated in this paper, which contains fires of various sizes and temperatures in a wide range of terrestrial biomes and climates, including RED, NIR, MIR and TIR channels. Based on the MODIS version 4 contextual algorithm and the characteristics of HJ-1B sensor, a contextual fire detection algorithm was proposed and tested using simulated HJ-1B data. It was evaluated by the probability of fire detection and false alarm as functions of fire temperature and fire area. Results indicate that when the simulated fire area is larger than 45 m2 and the simulated fire temperature is larger than 800 K, the algorithm has a higher probability of detection. But if the simulated fire area is smaller than 10 m2, only when the simulated fire temperature is larger than 900 K, may the fire be detected. For fire areas about 100 m2, the proposed algorithm has a higher detection probability than that of the MODIS product. Finally, the omission and commission error were evaluated which are important factors to affect the performance of this algorithm. It has been demonstrated that HJ-1B satellite data are much sensitive to smaller and cooler fires than MODIS or AVHRR data and the improved capabilities of HJ-1B data will offer a fine opportunity for the fire detection

Detection, Emission Estimation and Risk Prediction of Forest Fires in China Using Satellite Sensors and Simulation Models in the Past Three Decades—An Overview

Forest fires have major impact on ecosystems and greatly impact the amount of greenhouse gases and aerosols in the atmosphere. This paper presents an overview in the forest fire detection, emission estimation, and fire risk prediction in China using satellite imagery, climate data, and various simulation models over the past three decades. Since the 1980s, remotely-sensed data acquired by many satellites, such as NOAA/AVHRR, FY-series, MODIS, CBERS, and ENVISAT, have been widely utilized for detecting forest fire hot spots and burned areas in China. Some developed algorithms have been utilized for detecting the forest fire hot spots at a sub-pixel level. With respect to modeling the forest burning emission, a remote sensing data-driven Net Primary productivity (NPP) estimation model was developed for estimating forest biomass and fuel. In order to improve the forest fire risk modeling in China, real-time meteorological data, such as surface temperature, relative humidity, wind speed and direction, have been used as the model input for improving prediction of forest fire occurrence and its behavior. Shortwave infrared (SWIR) and near infrared (NIR) channels of satellite sensors have been employed for detecting live fuel moisture content (FMC), and the Normalized Difference Water Index (NDWI) was used for evaluating the forest vegetation condition and its moisture status

Detecting gas flares and estimating flaring volumes at individual flow stations using MODIS data.

Gas flaring has gained global recognition as a prominent agent of pollution, leading to the establishment of the Global Gas Flaring Reduction (GGFR) initiative, which requires an objective means of monitoring flaring activity. Because auditable information on flaring activity is difficult to obtain there have recently been attempts to detect flares using satellite imagery, typically at global scales. However, to adequately assess the environmental and health impacts of flaring from local to regional scales, it is important that we have a means of acquiring information on the location of individual active flaring sites and the volume of gas combusted at these sites. In this study we developed an approach to the retrieval of such information using nighttime MODIS thermal imagery. The MODIS flare detection technique (MODET) and the MODIS flare volume estimation technique (MOVET) both exploit the absolute and contextual radiometric response of flare sites. The levels of detection accuracy and estimation error were quantified using independent observations of flare location and volume. The MODET and MOVET were applied to an archive of MODIS data spanning 2000–2014 covering the Niger Delta, Nigeria, a significant global hotspot of flaring activity. The results demonstrate the substantial spatial and temporal variability in gas flaring across the region, between states and between onshore and offshore sites. Thus, whilst the estimated total volume of gas flared in the region over the study period is large (350 Billion Cubic Metres), the heterogeneity in the flaring indicates that the impacts of such flares will be highly variable in space and time. In this context, the MODET and MOVET offer a consistent and objective means of monitoring flaring activity over an appropriate range of scales and it is now important that their robustness and transferability is tested in other oil-producing regions of the world

Remote Sensing of Ecology, Biodiversity and Conservation: A Review from the Perspective of Remote Sensing Specialists

Remote sensing, the science of obtaining information via noncontact recording, has swept the fields of ecology, biodiversity and conservation (EBC). Several quality review papers have contributed to this field. However, these papers often discuss the issues from the standpoint of an ecologist or a biodiversity specialist. This review focuses on the spaceborne remote sensing of EBC from the perspective of remote sensing specialists, i.e., it is organized in the context of state-of-the-art remote sensing technology, including instruments and techniques. Herein, the instruments to be discussed consist of high spatial resolution, hyperspectral, thermal infrared, small-satellite constellation, and LIDAR sensors; and the techniques refer to image classification, vegetation index (VI), inversion algorithm, data fusion, and the integration of remote sensing (RS) and geographic information system (GIS)

Google the earth: what's next?

Sensing the Earth has proven to be a tremendously valuable tool for understanding the world around us. Over the last half-century, we have built a sophisticated network of satellites, aircraft, and ground-based remote sensing systems to provide raw information from which we derive and improve our knowledge of the Earth and its phenomena. Through remote sensing, our basic scientific knowledge of the Earth and how it functions has expanded rapidly in the last few decades. Applications of this knowledge, from natural hazard prediction to resource management, have already proven their benefit to society many times over. Today maps and satellite imageries have become an integral part of the developmental process and have also triggered new business opportunities. Maps are essential at all stages of infrastructure development, resource planning and the disaster management cycle. Satellite imagery/data can be used for everything from ground truthing and change detection, to more sophisticated analyses, including feature extraction and natural hazard prediction. As imagery has become more accessible and more affordable in recent years, there is also a growing convergence of imagery and geographic information system (GIS) applications. Geospatial scientists and analysts thus, need to be able to easily access imagery and move seamlessly between GIS and image processing applications to derive the most information possible from them. Technologically, the challenge is to design sensors that exhibit high sensitivity to the parameters of interest while minimizing instrument noise and impacts of other natural variables. The scientific challenge is to develop retrieval algorithms that describe the physical measurement process in sufficient detail, yet are simple enough to allow robust inversion of the remotely sensed signals. Considering the exponential growth of data volumes driven by the rapid progress in sensor and computer technologies in recent years, the future of remotely sensed data should ideally be in automated data processing, development of robust and transferable algorithms and processing chains that require little or no human intervention. In meeting the above mentioned challenges, some research works have been done at Universiti Putra Malaysia. These works cover all aspects of the remote sensing process, from instrument design, image processing, image analysis to the retrieval of geophysical parameters and their application in natural resources planning and disaster management. Some of the major research efforts include feature extraction from satellite imagery; spatial decision support system for oil spill detection, monitoring and contingency planning; fish forecasting; UAV-based remote imaging and natural disaster management and early warning systems for floods and landslides. This lecture concludes that through remote sensing, our basic scientific knowledge of the Earth and how it functions have expanded rapidly in the last few decades. Applications of this knowledge, from natural hazard prediction to resource management, have already proven to be beneficial to society many times over. As the demand for even faster, better and more temporally and spatially variable information grows dramatically, this lectures answers the question of what remote sensing will be like in the coming decades and the new capabilities and challenges that will emerg

Atmospheric remote sensing and radiopropagation: from numerical modeling to spaceborne and terrestrial applications

The remote sensing of electromagnetic wave properties is probably the most viable and fascinating way to observe and study physical media, comprising our planet and its atmosphere, at the same time ensuring a proper continuity in the observations. Applications are manifold and the scientific community has been importantly studying and investing on new technologies, which would let us widen our knowledge of what surrounds us. This thesis aims at showing some novel techniques and corresponding applications in the field of the atmospheric remote sensing and radio-propagation, at both microwave and optical wavelengths. The novel Sun-tracking microwave radiometry technique is shown. The antenna noise temperature of a ground-based microwave radiometer is measured by alternately pointing toward-the-Sun and off-the-Sun while tracking it along its diurnal ecliptic. During clear sky the brightness temperature of the Sun disk emission at K and Ka frequency bands and in the under-explored millimeter-wave V and W bands can be estimated by adopting different techniques. Parametric prediction models for retrieving all-weather atmospheric extinction from ground-based microwave radiometers are tested and their accuracy evaluated. Moreover, a characterization of suspended clouds in terms of atmospheric path attenuation is presented, by exploiting a stochastic approach used to model the time evolution of the cloud contribution. A model chain for the prediction of the tropospheric channel for the downlink of interplanetary missions operating above Ku band is proposed. On top of a detailed description of the approach, the chapter presents the validation results and examples of the model-chain online operation. Online operation has already been tested within a feasibility study applied to the BepiColombo mission to Mercury operated by the European Space Agency (ESA) and by exploiting the Hayabusa-2 mission Ka-band data by the Japan Aerospace Exploration Agency (JAXA), thanks to the ESA cross-support service. A preliminary (and successful) validation of the model-chain has been carried out by comparing the simulated signal-to-noise ratio with the one received from Hayabusa-2. At the next ITU World Radiocommunication Conference 2019, Agenda Item 1.13 will address the identification and the possible additional allocation of radio-frequency spectrum to serve the future development of systems supporting the fifth generation of cellular mobile communications (5G). The potential impact of International Mobile Telecommunications (IMT) deployments is shown in terms of received radio frequency interference by ESA’s telecommunication links. Received interference can derive from several radio-propagation mechanisms, which strongly depend on atmospheric conditions, radio frequency, link availability, distance and path topography; at any time a single mechanism, or more than one may be present. Results are shown in terms of required separation distances, i.e. the minimum distance between the earth station and the IMT station ensuring that the protection criteria for the earth station are met

Optical and radar remotely sensed data for large-area wildlife habitat mapping

Wildlife habitat mapping strongly supports applications in natural resource management, environmental conservation, impacts of anthropogenic activity, perturbed ecosystem restoration, species-at-risk recovery and species inventory. Remote sensing has long been identified as a feasible and effective technology for large-area wildlife habitat mapping. However, existing and future uncertainties in remote sensing will definitely have a significant effect on relevant scientific research, such as the limitation of Landsat-series data; the negative impact of cloud and cloud shadows (CCS) in optical imagery; and landscape pattern analysis using remote sensing classification products. This thesis adopted a manuscript-style format; it addresses these challenges (or uncertainties) and opportunities through exploring the state-of-the-art optical and radar remotely sensed data for large-area wildlife habitat mapping, and investigating their feasibility and applicability primarily by comparison either on the level of direct remote sensing products (e.g. classification accuracy) or indirect ecological model (e.g. presence/absence and frequency of use model based on landscape pattern analysis). A framework designed to identify and investigate the potential remotely sensed data, including Disaster Monitoring Constellation (DMC), Landsat Thematic Mapper (TM), Indian Remote Sensing (IRS), and RADARSAT-2, has been developed. The chosen DMC and RADARSAT-2 imagery have acceptable capability of addressing the existing and potential challenges (or uncertainties) in remote sensing of large-area habitat mapping, in order to produce cloud-free thematic maps for the study of wildlife habitat. A quantitative comparison between Landsat-based and IRS-based analyses showed that the characteristics of remote sensing products play an important role in landscape pattern analysis to build grizzly bear presence/absence and frequency of use models

Improving the estimation of fire danger, fire propagation and fire monitoring : new insights using remote sensing data and statistical methods

This thesis covers three major topics related to wildfires, remote sensing and meteorology: (i) quantifying and forecasting fire danger combining numerical weather forecasts and satellite observations of fire intensity; (ii) mapping burned areas from satellite observations with multiple spatial and spectral resolution; and (iii) modelling fire progression taking into account weather conditions and fuel (vegetation) availability. Regarding the first topic, an enhanced Fire Weather Index (FWI) is proposed by using statistical methods to combine the classical FWI with an atmospheric instability index with the aim of better forecasting the fire danger conditions favourable to the development of convective fires. Furthermore, the daily definition of the classical FWI was extended to an hourly timescale, allowing for assessment of the variability of the fire danger conditions throughout the day. For the second topic, a method is proposed to map and date burned areas using sequences of daily satellite data. This method, tested over several regions around the globe, provide burned area maps that outperform other existing methods for the task, particularly regarding the consistency and accuracy of the date of burning. Furthermore, a method is proposed for fast assessment of burned areas using 10-meter resolution satellite data and making use of Google Earth Engine (GEE) as a tool for preprocessing and downloading of data that is then used as input to a deep learning model that combines a coarse burned area map with the medium resolution data to provide a refined burned area map with 10-meter resolution at event level and with low computational requirements. Finally, for the third topic, a method is proposed to estimate the fire progression over a 12-hour period with resource to an ensemble of models trained based on the reconstruction of past events. Overall, I am confident that the results obtained and presented in this thesis provide a significant contribution to the remote sensing and wildfires scientific community while opening interesting paths for future research on the topics described

Cognitively-Engineered Multisensor Data Fusion Systems for Military Applications

The fusion of imagery from multiple sensors is a field of research that has been gaining prominence in the scientific community in recent years. The technical aspects of combining multisensory information have been and are currently being studied extensively. However, the cognitive aspects of multisensor data fusion have not received so much attention. Prior research in the field of cognitive engineering has shown that the cognitive aspects of any human-machine system should be taken into consideration in order to achieve systems that are both safe and useful. The goal of this research was to model how humans interpret multisensory data, and to evaluate the value of a cognitively-engineered multisensory data fusion system as an effective, time-saving means of presenting information in high- stress situations. Specifically, this research used principles from cognitive engineering to design, implement, and evaluate a multisensor data fusion system for pilots in high-stress situations. Two preliminary studies were performed, and concurrent protocol analysis was conducted to determine how humans interpret and mentally fuse information from multiple sensors in both low- and high-stress environments. This information was used to develop a model for human processing of information from multiple data sources. This model was then implemented in the development of algorithms for fusing imagery from several disparate sensors (visible and infrared). The model and the system as a whole were empirically evaluated in an experiment with fighter pilots in a simulated combat environment. The results show that the model is an accurate depiction of how humans interpret information from multiple disparate sensors, and that the algorithms show promise for assisting fighter pilots in quicker and more accurate target identification