A configuration memory architecture for fast run-time reconfiguration of FPGAs

This paper presents a configuration memory architecture that offers fast FPGA reconfiguration. The underlying principle behind the design is the use of fine-grained partial reconfiguration that allows significant configuration re-use while switching from one circuit to another. The proposed configuration memory works by reading on-chip configuration data into a buffer, modifying them based on the externally supplied data and writing them back to their original registers. A prototype implementation of the proposed design in a 90nm cell library indicates that the new memory adds less than 1% area to a commercially available FPGA implemented using the same library. The proposed design reduces the reconfiguration time for a wide set of benchmark circuits by 63%. However, power consumption during reconfiguration increases by a factor of 2.5 because the read-modify-write strategy results in more switching in the memory array

A novel tool flow for increased routing configuration similarity in multi-mode circuits

A multi-mode circuit implements the functionality of a limited number of circuits, called modes, of which at any given time only one needs to be realised. Using run-time reconfiguration (RTR) of an FPGA, all the modes can be time-multiplexed on the same reconfigurable region, requiring only an area that can contain the biggest mode. Typically, conventional run-time reconfiguration techniques generate a configuration of the reconfigurable region for every mode separately. This results in configurations that are bit-wise very different. Thus, in this case, many bits need to be changed in the configuration memory to switch between modes, leading to long reconfiguration times. In this paper we present a novel tool flow that retains the placement of the conventional RTR flow, but uses TRoute, a reconfiguration-aware connection router, to implement the connections of all modes simultaneously. TRoute stimulates the sharing of routing resources between connections of different modes. This results in a significant increase in the similarity between the routing configurations of the modes. In the experimental results it is shown that the number of routing configuration bits that needs to be rewritten is reduced with a factor between 2 and 4 compared to conventional techniques

Memory-efficient and fast run-time reconfiguration of regularly structured designs

Previous work has shown that run-time reconfiguration of FPGAs benefits greatly from the use of Tunable LUT (TLUT) circuits. These can be rapidly transformed into a specialized LUT circuit and are also very memory efficient when representing regularly structured designs, where the same hardware module is instantiated many times. However, the memory requirements and reconfiguration time of a run-time reconfigurable application are also dependent on the reconfiguration mechanism. In this paper, we will show that the memory requirements of conventional ICAP reconfiguration grow very fast with the number of modules, resulting in excessive memory usage. We propose to use Shift-Register-LUT (SRL) reconfiguration which is faster and results in a memory usage that is independent of the number of modules

Criticality Aware Soft Error Mitigation in the Configuration Memory of SRAM based FPGA

Efficient low complexity error correcting code(ECC) is considered as an effective technique for mitigation of multi-bit upset (MBU) in the configuration memory(CM)of static random access memory (SRAM) based Field Programmable Gate Array (FPGA) devices. Traditional multi-bit ECCs have large overhead and complex decoding circuit to correct adjacent multibit error. In this work, we propose a simple multi-bit ECC which uses Secure Hash Algorithm for error detection and parity based two dimensional Erasure Product Code for error correction. Present error mitigation techniques perform error correction in the CM without considering the criticality or the execution period of the tasks allocated in different portion of CM. In most of the cases, error correction is not done in the right instant, which sometimes either suspends normal system operation or wastes hardware resources for less critical tasks. In this paper,we advocate for a dynamic priority-based hardware scheduling algorithm which chooses the tasks for error correction based on their area, execution period and criticality. The proposed method has been validated in terms of overhead due to redundant bits, error correction time and system reliabilityComment: 6 pages, 8 figures, conferenc

An automatic tool flow for the combined implementation of multi-mode circuits

A multi-mode circuit implements the functionality of a limited number of circuits, called modes, of which at any given time only one needs to be realised. Using run-time reconfiguration of an FPGA, all the modes can be implemented on the same reconfigurable region, requiring only an area that can contain the biggest mode. Typically, conventional run-time reconfiguration techniques generate a configuration for every mode separately. To switch between modes the complete reconfigurable region is rewritten, which often leads to very long reconfiguration times. In this paper we present a novel, fully automated tool flow that exploits similarities between the modes and uses Dynamic Circuit Specialization to drastically reduce reconfiguration time. Experimental results show that the number of bits that is rewritten in the configuration memory reduces with a factor from 4.6X to 5.1X without significant performance penalties

A dynamically reconfigurable pattern matcher for regular expressions on FPGA

In this article we describe how to expand a partially dynamic reconfig- urable pattern matcher for regular expressions presented in previous work by Di- vyasree and Rajashekar [2]. The resulting, extended, pattern matcher is fully dynamically reconfigurable. First, the design is adapted for use with parameterisable configurations, a method for Dynamic Circuit Specialization. Using parameteris- able configurations allows us to achieve the same area gains as the hand crafted reconfigurable design, with the benefit that parameterisable configurations can be applied automatically. This results in a design that is more easily adaptable to spe- cific applications and allows for an easier design exploration. Additionally, the pa- rameterisable configuration implementation is also generated automatically, which greatly reduces the design overhead of using dynamic reconfiguration. Secondly, we propose a number of expansions to the original design to overcome several limitations in the original design that constrain the dynamic reconfigurability of the pattern matcher. We propose two different solutions to dynamically change the character that is matched in a certain block. The resulting pattern matcher, after these changes, is fully dynamically reconfigurable, all aspects of the implemented regular expression can be changed at run-time

Virtual Prototyping for Dynamically Reconfigurable Architectures using Dynamic Generic Mapping

This paper presents a virtual prototyping methodology for Dynamically Reconfigurable (DR) FPGAs. The methodology is based around a library of VHDL image processing components and allows the rapid prototyping and algorithmic development of low-level image processing systems. For the effective modelling of dynamically reconfigurable designs a new technique named, Dynamic Generic Mapping is introduced. This method allows efficient representation of dynamic reconfiguration without needing any additional components to model the reconfiguration process. This gives the designer more flexibility in modelling dynamic configurations than other methodologies. Models created using this technique can then be simulated and targeted to a specific technology using the same code. This technique is demonstrated through the realisation of modules for a motion tracking system targeted to a DR environment, RIFLE-62

FPGA dynamic and partial reconfiguration : a survey of architectures, methods, and applications

Dynamic and partial reconfiguration are key differentiating capabilities of field programmable gate arrays (FPGAs). While they have been studied extensively in academic literature, they find limited use in deployed systems. We review FPGA reconfiguration, looking at architectures built for the purpose, and the properties of modern commercial architectures. We then investigate design flows, and identify the key challenges in making reconfigurable FPGA systems easier to design. Finally, we look at applications where reconfiguration has found use, as well as proposing new areas where this capability places FPGAs in a unique position for adoption