1,130 research outputs found

    MORA - an architecture and programming model for a resource efficient coarse grained reconfigurable processor

    Get PDF
    This paper presents an architecture and implementation details for MORA, a novel coarse grained reconfigurable processor for accelerating media processing applications. The MORA architecture involves a 2-D array of several such processors, to deliver low cost, high throughput performance in media processing applications. A distinguishing feature of the MORA architecture is the co-design of hardware architecture and low-level programming language throughout the design cycle. The implementation details for the single MORA processor, and benchmark evaluation using a cycle accurate simulator are presented

    A Reconfigurable Platform For Cognitive Radio

    Get PDF
    TodayÂżs rigid spectrum allocation scheme creates a spectrum scarcity problem for future wireless communications. Measurements show that a wide range of the allocated frequency bands are rarely used. Cognitive radio is a novel approach to improve the spectrum usage, which is able to sense the spectrum and adapt its transmission while coexisting with the licensed spectrum user. A reconfigurable radio platform is required to provide enough adaptivity for cognitive radio. In this paper, we propose a cognitive radio system architecture and discuss its possible implementation on a heterogeneous reconfigurable radio platform

    Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures

    Get PDF
    This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.Siirretty Doriast

    Reconfigurable acceleration of Recurrent Neural Networks

    Get PDF
    Recurrent Neural Networks (RNNs) have been successful in a wide range of applications involving temporal sequences such as natural language processing, speech recognition and video analysis. However, RNNs often require a significant amount of memory and computational resources. In addition, the recurrent nature and data dependencies in RNN computations can lead to system stall, resulting in low throughput and high latency. This work describes novel parallel hardware architectures for accelerating RNN inference using Field-Programmable Gate Array (FPGA) technology, which considers the data dependencies and high computational costs of RNNs. The first contribution of this thesis is a latency-hiding architecture that utilizes column-wise matrix-vector multiplication instead of the conventional row-wise operation to eliminate data dependencies and improve the throughput of RNN inference designs. This architecture is further enhanced by a configurable checkerboard tiling strategy which allows large dimensions of weight matrices, while supporting element-based parallelism and vector-based parallelism. The presented reconfigurable RNN designs show significant speedup over CPU, GPU, and other FPGA designs. The second contribution of this thesis is a weight reuse approach for large RNN models with weights stored in off-chip memory, running with a batch size of one. A novel blocking-batching strategy is proposed to optimize the throughput of large RNN designs on FPGAs by reusing the RNN weights. Performance analysis is also introduced to enable FPGA designs to achieve the best trade-off between area, power consumption and performance. Promising power efficiency improvement has been achieved in addition to speeding up over CPU and GPU designs. The third contribution of this thesis is a low latency design for RNNs based on a partially-folded hardware architecture. It also introduces a technique that balances initiation interval of multi-layer RNN inferences to increase hardware efficiency and throughput while reducing latency. The approach is evaluated on a variety of applications, including gravitational wave detection and Bayesian RNN-based ECG anomaly detection. To facilitate the use of this approach, we open source an RNN template which enables the generation of low-latency FPGA designs with efficient resource utilization using high-level synthesis tools.Open Acces

    A unified approach for managing heterogeneous processing elements on FPGAs

    Get PDF
    FPGA designs do not typically include all available processing elements, e.g., LUTs, DSPs and embedded cores. Additional work is required to manage their different implementations and behaviour, which can unbalance parallel pipelines and complicate development. In this paper we introduce a novel management architecture to unify heterogeneous processing elements into compute pools. A pool formed of E processing elements, each implementing the same function, serves D parallel function calls. A call-and-response approach to computation allows for different processing element implementations, connections, latencies and non-deterministic behaviour. Our rotating scheduler automatically arbitrates access to processing elements, uses greatly simplified routing, and scales linearly with D parallel accesses to the compute pool. Processing elements can easily be added to improve performance, or removed to reduce resource use and routing, facilitating higher operating frequencies. Migrating to larger or smaller FPGAs thus comes at a known performance cost. We assess our framework with a range of neural network activation functions (ReLU, LReLU, ELU, GELU, sigmoid, swish, softplus and tanh) on the Xilinx Alveo U280

    Are coarse-grained overlays ready for general purpose application acceleration on FPGAs?

    Get PDF
    Combining processors with hardware accelerators has become a norm with systems-on-chip (SoCs) ever present in modern compute devices. Heterogeneous programmable system on chip platforms sometimes referred to as hybrid FPGAs, tightly couple general purpose processors with high performance reconfigurable fabrics, providing a more flexible alternative. We can now think of a software application with hardware accelerated portions that are reconfigured at runtime. While such ideas have been explored in the past, modern hybrid FPGAs are the first commercial platforms to enable this move to a more software oriented view, where reconfiguration enables hardware resources to be shared by multiple tasks in a bigger application. However, while the rapidly increasing logic density and more capable hard resources found in modern hybrid FPGA devices should make them widely deployable, they remain constrained within specialist application domains. This is due to both design productivity issues and a lack of suitable hardware abstraction to eliminate the need for working with platform-specific details, as server and desktop virtualization has done in a more general sense. To allow mainstream adoption of FPGA based accelerators in general purpose computing, there is a need to virtualize FPGAs and make them more accessible to application developers who are accustomed to software API abstractions and fast development cycles. In this paper, we discuss the role of overlay architectures in enabling general purpose FPGA application acceleration

    Approximate FPGA-based LSTMs under Computation Time Constraints

    Full text link
    Recurrent Neural Networks and in particular Long Short-Term Memory (LSTM) networks have demonstrated state-of-the-art accuracy in several emerging Artificial Intelligence tasks. However, the models are becoming increasingly demanding in terms of computational and memory load. Emerging latency-sensitive applications including mobile robots and autonomous vehicles often operate under stringent computation time constraints. In this paper, we address the challenge of deploying computationally demanding LSTMs at a constrained time budget by introducing an approximate computing scheme that combines iterative low-rank compression and pruning, along with a novel FPGA-based LSTM architecture. Combined in an end-to-end framework, the approximation method's parameters are optimised and the architecture is configured to address the problem of high-performance LSTM execution in time-constrained applications. Quantitative evaluation on a real-life image captioning application indicates that the proposed methods required up to 6.5x less time to achieve the same application-level accuracy compared to a baseline method, while achieving an average of 25x higher accuracy under the same computation time constraints.Comment: Accepted at the 14th International Symposium in Applied Reconfigurable Computing (ARC) 201
    • …
    corecore