Adaptive runtime-assisted block prefetching on chip-multiprocessors

Memory stalls are a significant source of performance degradation in modern processors. Data prefetching is a widely adopted and well studied technique used to alleviate this problem. Prefetching can be performed by the hardware, or be initiated and controlled by software. Among software controlled prefetching we find a wide variety of schemes, including runtime-directed prefetching and more specifically runtime-directed block prefetching. This paper proposes a hybrid prefetching mechanism that integrates a software driven block prefetcher with existing hardware prefetching techniques. Our runtime-assisted software prefetcher brings large blocks of data on-chip with the support of a low cost hardware engine, and synergizes with existing hardware prefetchers that manage locality at a finer granularity. The runtime system that drives the prefetch engine dynamically selects which cache to prefetch to. Our evaluation on a set of scientific benchmarks obtains a maximum speed up of 32 and 10 % on average compared to a baseline with hardware prefetching only. As a result, we also achieve a reduction of up to 18 and 3 % on average in energy-to-solution.Peer ReviewedPostprint (author's final draft

Hybrid Caching for Chip Multiprocessors Using Compiler-Based Data Classification

The high performance delivered by modern computer system keeps scaling with an increasingnumber of processors connected using distributed network on-chip. As a result, memory accesslatency, largely dominated by remote data cache access and inter-processor communication, is becoming a critical performance bottleneck. To release this problem, it is necessary to localize data access as much as possible while keep efficient on-chip cache memory utilization. Achieving this however, is application dependent and needs a keen insight into the memory access characteristics of the applications. This thesis demonstrates how using fairly simple thus inexpensive compiler analysis memory accesses can be classified into private data access and shared data access. In addition, we introduce a third classification named probably private access and demonstrate the impact of this category compared to traditional private and shared memory classification. The memory access classification information from the compiler analysis is then provided to the runtime system through a modified memory allocator and page table to facilitate a hybrid private-shared caching technique. The hybrid cache mechanism is aware of different data access classification and adopts appropriate placement and search policies accordingly to improve performance. Our analysis demonstrates that many applications have a significant amount of both private and shared data and that compiler analysis can identify the private data effectively for many applications. Experimentsresults show that the implemented hybrid caching scheme achieves 4.03% performance improvement over state of the art NUCA-base caching

Porting the Sisal functional language to distributed-memory multiprocessors

Parallel computing is becoming increasingly ubiquitous in recent years. The sizes of application problems continuously increase for solving real-world problems. Distributed-memory multiprocessors have been regarded as a viable architecture of scalable and economical design for building large scale parallel machines. While these parallel machines can provide computational capabilities, programming such large-scale machines is often very difficult due to many practical issues including parallelization, data distribution, workload distribution, and remote memory latency. This thesis proposes to solve the programmability and performance issues of distributed-memory machines using the Sisal functional language. The programs written in Sisal will be automatically parallelized, scheduled and run on distributed-memory multiprocessors with no programmer intervention. Specifically, the proposed approach consists of the following steps. Given a program written in Sisal, the front end Sisal compiler generates a directed acyclic graph(DAG) to expose parallelism in the program. The DAG is partitioned and scheduled based on loop parallelism. The scheduled DAG is then translated to C programs with machine specific parallel constructs. The parallel C programs are finally compiled by the target machine specific compilers to generate executables. A distributed-memory parallel machine, the 80-processor ETL EM-X, has been chosen to perform experiments. The entire procedure has been implemented on the EMX multiprocessor. Four problems are selected for experiments: bitonic sorting, search, dot-product and Fast Fourier Transform. Preliminary execution results indicate that automatic parallelization of the Sisal programs based on loop parallelism is effective. The speedup for these four problems is ranging from 17 to 60 on a 64-processor EM-X. Preliminary experimental results further indicate that programming distributed-memory multiprocessors using a functional language indeed frees the programmers from lowl-evel programming details while allowing them to focus on algorithmic performance improvement

Performance and Memory Space Optimizations for Embedded Systems

Embedded systems have three common principles: real-time performance, low power consumption, and low price (limited hardware). Embedded computers use chip multiprocessors (CMPs) to meet these expectations. However, one of the major problems is lack of efficient software support for CMPs; in particular, automated code parallelizers are needed. The aim of this study is to explore various ways to increase performance, as well as reducing resource usage and energy consumption for embedded systems. We use code restructuring, loop scheduling, data transformation, code and data placement, and scratch-pad memory (SPM) management as our tools in different embedded system scenarios. The majority of our work is focused on loop scheduling. Main contributions of our work are: We propose a memory saving strategy that exploits the value locality in array data by storing arrays in a compressed form. Based on the compressed forms of the input arrays, our approach automatically determines the compressed forms of the output arrays and also automatically restructures the code. We propose and evaluate a compiler-directed code scheduling scheme, which considers both parallelism and data locality. It analyzes the code using a locality parallelism graph representation, and assigns the nodes of this graph to processors.We also introduce an Integer Linear Programming based formulation of the scheduling problem. We propose a compiler-based SPM conscious loop scheduling strategy for array/loop based embedded applications. The method is to distribute loop iterations across parallel processors in an SPM-conscious manner. The compiler identifies potential SPM hits and misses, and distributes loop iterations such that the processors have close execution times. We present an SPM management technique using Markov chain based data access. We propose a compiler directed integrated code and data placement scheme for 2-D mesh based CMP architectures. Using a Code-Data Affinity Graph (CDAG) to represent the relationship between loop iterations and array data, it assigns the sets of loop iterations to processing cores and sets of data blocks to on-chip memories. We present a memory bank aware dynamic loop scheduling scheme for array intensive applications.The goal is to minimize the number of memory banks needed for executing the group of loop iterations

Simulation Of Multi-core Systems And Interconnections And Evaluation Of Fat-Mesh Networks

Simulators are very important in computer architecture research as they enable the exploration of new architectures to obtain detailed performance evaluation without building costly physical hardware. Simulation is even more critical to study future many-core architectures as it provides the opportunity to assess currently non-existing computer systems. In this thesis, a multiprocessor simulator is presented based on a cycle accurate architecture simulator called SESC. The shared L2 cache system is extended into a distributed shared cache (DSC) with a directory-based cache coherency protocol. A mesh network module is extended and integrated into SESC to replace the bus for scalable inter-processor communication. While these efforts complete an extended multiprocessor simulation infrastructure, two interconnection enhancements are proposed and evaluated. A novel non-uniform fat-mesh network structure similar to the idea of fat-tree is proposed. This non-uniform mesh network takes advantage of the average traffic pattern, typically all-to-all in DSC, to dedicate additional links for connections with heavy traffic (e.g., near the center) and fewer links for lighter traffic (e.g., near the periphery). Two fat-mesh schemes are implemented based on different routing algorithms. Analytical fat-mesh models are constructed by presenting the expressions for the traffic requirements of personalized all-to-all traffic. Performance improvements over the uniform mesh are demonstrated in the results from the simulator. A hybrid network consisting of one packet switching plane and multiple circuit switching planes is constructed as the second enhancement. The circuit switching planes provide fast paths between neighbors with heavy communication traffic. A compiler technique that abstracts the symbolic expressions of benchmarks' communication patterns can be used to help facilitate the circuit establishment

A Survey of Techniques for Architecting TLBs

“Translation lookaside buffer” (TLB) caches virtual to physical address translation information and is used in systems ranging from embedded devices to high-end servers. Since TLB is accessed very frequently and a TLB miss is extremely costly, prudent management of TLB is important for improving performance and energy efficiency of processors. In this paper, we present a survey of techniques for architecting and managing TLBs. We characterize the techniques across several dimensions to highlight their similarities and distinctions. We believe that this paper will be useful for chip designers, computer architects and system engineers

AN ARCHITECTURE EVALUATION AND IMPLEMENTATION OF A SOFT GPGPU FOR FPGAs

Embedded and mobile systems must be able to execute a variety of different types of code, often with minimal available hardware. Many embedded systems now come with a simple processor and an FPGA, but not more energy-hungry components, such as a GPGPU. In this dissertation we present FlexGrip, a soft architecture which allows for the execution of GPGPU code on an FPGA without the need to recompile the design. The architecture is optimized for FPGA implementation to effectively support the conditional and thread-based execution characteristics of GPGPU execution without FPGA design recompilation. This architecture supports direct CUDA compilation to a binary which is executable on the FPGA-based GPGPU. Our architecture is customizable, thus providing the FPGA designer with a selection of GPGPU cores which display performance versus area tradeoffs. This dissertation describes the FlexGrip architecture in detail and showcases the benefits by evaluating the design for a collection of five standard CUDA benchmarks which are compiled using standard GPGPU compilation tools. Speedups of 23x, on average, versus a MicroBlaze microprocessor are achieved for designs which take advantage of the conditional execution capabilities offered by FlexGrip. We also show FlexGrip can achieve an 80% average reduction of dynamic energy versus the MicroBlaze microprocessor. The dissertation furthers discussion by exploring application-customized versions of the soft GPGPU, thus exploiting the overlay architecture. We expand the architecture to multiple processors per GPGPU and optimizing away features which are not needed by certain classes of applications. These optimizations, which include the effective use of block RAMs and DSP blocks, are critical to the performance of FlexGrip. By implementing a 2 GPGPU design, we show speedups of 44x on average versus a MicroBlaze microprocessor. Application-customized versions of the soft GPGPU can be used to further reduce dynamic energy consumption by an average of 14%. To complete this thesis, we augmented a GPGPU cycle accurate simulator to emulate FlexGrip and evaluate different levels of cache design spaces. We show performance increases for select benchmarks, however, we also show that 64% and 45% of benchmarks exhibited performance decreases when L1D cache was enabled for the 1 SMP and 2 SMP configurations, and only one benchmark showed performance improvement when the L2 cache was enabled

Exploiting cache locality at run-time

With the increasing gap between the speeds of the processor and memory system, memory access has become a major performance bottleneck in modern computer systems. Recently, Symmetric Multi-Processor (SMP) systems have emerged as a major class of high-performance platforms. Improving the memory performance of Parallel applications with dynamic memory-access patterns on Symmetric Multi-Processors (SMP) is a hard problem. The solution to this problem is critical to the successful use of the SMP systems because dynamic memory-access patterns occur in many real-world applications. This dissertation is aimed at solving this problem.;Based on a rigorous analysis of cache-locality optimization, we propose a memory-layout oriented run-time technique to exploit the cache locality of parallel loops. Our technique have been implemented in a run-time system. Using simulation and measurement, we have shown our run-time approach can achieve comparable performance with compiler optimizations for those regular applications, whose load balance and cache locality can be well optimized by tiling and other program transformations. However, our approach was shown to improve significantly the memory performance for applications with dynamic memory-access patterns. Such applications are usually hard to optimize with static compiler optimizations.;Several contributions are made in this dissertation. We present models to characterize the complexity and present a solution framework for optimizing cache locality. We present an effective estimation technique for memory-access patterns to support efficient locality optimizations and information integration. We present a memory-layout oriented run-time technique for locality optimization. We present efficient scheduling algorithms to trade off locality and load imbalance. We provide a detailed performance evaluation of the run-time technique