313 research outputs found
Satellite-MEC Integration for 6G Internet of Things: Minimal Structures, Advances, and Prospects
The sixth-generation (6G) network is envisioned to shift its focus from the
service requirements of human beings' to those of Internet-of-Things (IoT)
devices'. Satellite communications are indispensable in 6G to support IoT
devices operating in rural or disastrous areas. However, satellite networks
face the inherent challenges of low data rate and large latency, which may not
support computation-intensive and delay-sensitive IoT applications. Mobile Edge
Computing (MEC) is a burgeoning paradigm by extending cloud computing
capabilities to the network edge. By utilizing MEC technologies, the
resource-limited IoT devices can access abundant computation resources with low
latency, which enables the highly demanding applications while meeting strict
delay requirements. Therefore, an integration of satellite communications and
MEC technologies is necessary to better enable 6G IoT. In this survey, we
provide a holistic overview of satellite-MEC integration. We first discuss the
main challenges of the integrated satellite-MEC network and propose three
minimal integrating structures. For each minimal structure, we summarize the
current advances in terms of their research topics, after which we discuss the
lessons learned and future directions of the minimal structure. Finally, we
outline potential research issues to envision a more intelligent, more secure,
and greener integrated satellite-MEC network
Edge/Fog Computing Technologies for IoT Infrastructure
The prevalence of smart devices and cloud computing has led to an explosion in the amount of data generated by IoT devices. Moreover, emerging IoT applications, such as augmented and virtual reality (AR/VR), intelligent transportation systems, and smart factories require ultra-low latency for data communication and processing. Fog/edge computing is a new computing paradigm where fully distributed fog/edge nodes located nearby end devices provide computing resources. By analyzing, filtering, and processing at local fog/edge resources instead of transferring tremendous data to the centralized cloud servers, fog/edge computing can reduce the processing delay and network traffic significantly. With these advantages, fog/edge computing is expected to be one of the key enabling technologies for building the IoT infrastructure. Aiming to explore the recent research and development on fog/edge computing technologies for building an IoT infrastructure, this book collected 10 articles. The selected articles cover diverse topics such as resource management, service provisioning, task offloading and scheduling, container orchestration, and security on edge/fog computing infrastructure, which can help to grasp recent trends, as well as state-of-the-art algorithms of fog/edge computing technologies
Resource Management in Multi-Access Edge Computing (MEC)
This PhD thesis investigates the effective ways of managing the resources of a Multi-Access Edge Computing Platform (MEC) in 5th Generation Mobile Communication (5G) networks.
The main characteristics of MEC include distributed nature, proximity to users, and high availability. Based on these key features, solutions have been proposed for effective resource
management. In this research, two aspects of resource management in MEC have been addressed. They are the computational resource and the caching resource which corresponds to the services provided by the MEC.
MEC is a new 5G enabling technology proposed to reduce latency by bringing cloud computing capability closer to end-user Internet of Things (IoT) and mobile devices. MEC would support latency-critical user applications such as driverless cars and e-health. These applications will depend on resources and services provided by the MEC. However, MEC has
limited computational and storage resources compared to the cloud. Therefore, it is important to ensure a reliable MEC network communication during resource provisioning by eradicating the chances of deadlock. Deadlock may occur due to a huge number of devices contending for a limited amount of resources if adequate measures are not put in place. It is
crucial to eradicate deadlock while scheduling and provisioning resources on MEC to achieve a highly reliable and readily available system to support latency-critical applications. In this research, a deadlock avoidance resource provisioning algorithm has been proposed for industrial IoT devices using MEC platforms to ensure higher reliability of network interactions. The proposed scheme incorporates Banker’s resource-request algorithm using Software Defined Networking (SDN) to reduce communication overhead. Simulation and experimental results have shown that system deadlock can be prevented by applying the proposed algorithm which ultimately leads to a more reliable network interaction between mobile stations and MEC platforms.
Additionally, this research explores the use of MEC as a caching platform as it is proclaimed as a key technology for reducing service processing delays in 5G networks. Caching on MEC decreases service latency and improve data content access by allowing direct content delivery through the edge without fetching data from the remote server. Caching on MEC is also deemed as an effective approach that guarantees more reachability due to proximity to endusers. In this regard, a novel hybrid content caching algorithm has been proposed for MEC platforms to increase their caching efficiency. The proposed algorithm is a unification of a modified Belady’s algorithm and a distributed cooperative caching algorithm to improve data access while reducing latency. A polynomial fit algorithm with Lagrange interpolation is employed to predict future request references for Belady’s algorithm. Experimental results show that the proposed algorithm obtains 4% more cache hits due to its selective caching approach when compared with case study algorithms. Results also show that the use of a cooperative algorithm can improve the total cache hits up to 80%.
Furthermore, this thesis has also explored another predictive caching scheme to further improve caching efficiency. The motivation was to investigate another predictive caching approach as an improvement to the formal. A Predictive Collaborative Replacement (PCR) caching framework has been proposed as a result which consists of three schemes. Each of the schemes addresses a particular problem. The proactive predictive scheme has been proposed to address the problem of continuous change in cache popularity trends. The collaborative scheme addresses the problem of cache redundancy in the collaborative space. Finally, the replacement scheme is a solution to evict cold cache blocks and increase hit ratio. Simulation experiment has shown that the replacement scheme achieves 3% more cache hits than existing replacement algorithms such as Least Recently Used, Multi Queue and Frequency-based replacement. PCR algorithm has been tested using a real dataset (MovieLens20M dataset) and compared with an existing contemporary predictive algorithm. Results show that PCR performs better with a 25% increase in hit ratio and a 10% CPU utilization overhead
Collaborative Vehicular Edge Computing Networks: Architecture Design and Research Challenges
The emergence of augmented reality (AR), autonomous driving and other new applications have greatly enriched the functionality of the vehicular networks. However, these applications usually require complex calculations and large amounts of storage, which puts tremendous pressure on traditional vehicular networks. Mobile edge computing (MEC) is proposed as a prospective technique to extend computing and storage resources to the edge of the network. Combined with MEC, the computing and storage capabilities of the vehicular network can be further enhanced. Therefore, in this paper, we explore the novel collaborative vehicular edge computing network (CVECN) architecture. We first review the work related to MEC and vehicular networks. Then we discuss the design principles of CVECN. Based on the principles, we present the detailed CVECN architecture, and introduce the corresponding functional modules, communication process, as well as the installation and deployment ideas. Furthermore, the promising technical challenges, including collaborative coalition formation, collaborative task offloading and mobility management, are presented. And some potential research issues for future research are highlighted. Finally, simulation results are verified that the proposed CVECN can significantly improve network performance
Edge Computing for Internet of Things
The Internet-of-Things is becoming an established technology, with devices being deployed in homes, workplaces, and public areas at an increasingly rapid rate. IoT devices are the core technology of smart-homes, smart-cities, intelligent transport systems, and promise to optimise travel, reduce energy usage and improve quality of life. With the IoT prevalence, the problem of how to manage the vast volumes of data, wide variety and type of data generated, and erratic generation patterns is becoming increasingly clear and challenging. This Special Issue focuses on solving this problem through the use of edge computing. Edge computing offers a solution to managing IoT data through the processing of IoT data close to the location where the data is being generated. Edge computing allows computation to be performed locally, thus reducing the volume of data that needs to be transmitted to remote data centres and Cloud storage. It also allows decisions to be made locally without having to wait for Cloud servers to respond
Supporting UAVs with Edge Computing: A Review of Opportunities and Challenges
Over the last years, Unmanned Aerial Vehicles (UAVs) have seen significant
advancements in sensor capabilities and computational abilities, allowing for
efficient autonomous navigation and visual tracking applications. However, the
demand for computationally complex tasks has increased faster than advances in
battery technology. This opens up possibilities for improvements using edge
computing. In edge computing, edge servers can achieve lower latency responses
compared to traditional cloud servers through strategic geographic deployments.
Furthermore, these servers can maintain superior computational performance
compared to UAVs, as they are not limited by battery constraints. Combining
these technologies by aiding UAVs with edge servers, research finds measurable
improvements in task completion speed, energy efficiency, and reliability
across multiple applications and industries. This systematic literature review
aims to analyze the current state of research and collect, select, and extract
the key areas where UAV activities can be supported and improved through edge
computing
- …