Astrobee: A New Platform for Free-Flying Robotics on the International Space Station

The Astrobees are next-generation free-flying robots that will operate in the interior of the International Space Station (ISS). Their primary purpose is to provide a flexible platform for research on zero-g freeflying robotics, with the ability to carry a wide variety of future research payloads and guest science software. They will also serve utility functions: as free-flying cameras to record video of astronaut activities, and as mobile sensor platforms to conduct surveys of the ISS. The Astrobee system includes two robots, a docking station, and a ground data system (GDS). It is developed by the Human Exploration Telerobotics 2 (HET-2) Project, which began in Oct. 2014, and will deliver the Astrobees for launch to ISS in 2017. This paper covers selected aspects of the Astrobee design, focusing on capabilities relevant to potential users of the platform

Ultra high frequency (UHF) radio-frequency identification (RFID) for robot perception and mobile manipulation

Personal robots with autonomy, mobility, and manipulation capabilities have the potential to dramatically improve quality of life for various user populations, such as older adults and individuals with motor impairments. Unfortunately, unstructured environments present many challenges that hinder robot deployment in ordinary homes. This thesis seeks to address some of these challenges through a new robotic sensing modality that leverages a small amount of environmental augmentation in the form of Ultra High Frequency (UHF) Radio-Frequency Identification (RFID) tags. Previous research has demonstrated the utility of infrastructure tags (affixed to walls) for robot localization; in this thesis, we specifically focus on tagging objects. Owing to their low-cost and passive (battery-free) operation, users can apply UHF RFID tags to hundreds of objects throughout their homes. The tags provide two valuable properties for robots: a unique identifier and receive signal strength indicator (RSSI, the strength of a tag's response). This thesis explores robot behaviors and radio frequency perception techniques using robot-mounted UHF RFID readers that enable a robot to efficiently discover, locate, and interact with UHF RFID tags applied to objects and people of interest. The behaviors and algorithms explicitly rely on the robot's mobility and manipulation capabilities to provide multiple opportunistic views of the complex electromagnetic landscape inside a home environment. The electromagnetic properties of RFID tags change when applied to common household objects. Objects can have varied material properties, can be placed in diverse orientations, and be relocated to completely new environments. We present a new class of optimization-based techniques for RFID sensing that are robust to the variation in tag performance caused by these complexities. We discuss a hybrid global-local search algorithm where a robot employing long-range directional antennas searches for tagged objects by maximizing expected RSSI measurements; that is, the robot attempts to position itself (1) near a desired tagged object and (2) oriented towards it. The robot first performs a sparse, global RFID search to locate a pose in the neighborhood of the tagged object, followed by a series of local search behaviors (bearing estimation and RFID servoing) to refine the robot's state within the local basin of attraction. We report on RFID search experiments performed in Georgia Tech's Aware Home (a real home). Our optimization-based approach yields superior performance compared to state of the art tag localization algorithms, does not require RF sensor models, is easy to implement, and generalizes to other short-range RFID sensor systems embedded in a robot's end effector. We demonstrate proof of concept applications, such as medication delivery and multi-sensor fusion, using these techniques. Through our experimental results, we show that UHF RFID is a complementary sensing modality that can assist robots in unstructured human environments.PhDCommittee Chair: Kemp, Charles C.; Committee Member: Abowd, Gregory; Committee Member: Howard, Ayanna; Committee Member: Ingram, Mary Ann; Committee Member: Reynolds, Matt; Committee Member: Tentzeris, Emmanoui

Contemporary Robotics

This book book is a collection of 18 chapters written by internationally recognized experts and well-known professionals of the field. Chapters contribute to diverse facets of contemporary robotics and autonomous systems. The volume is organized in four thematic parts according to the main subjects, regarding the recent advances in the contemporary robotics. The first thematic topics of the book are devoted to the theoretical issues. This includes development of algorithms for automatic trajectory generation using redudancy resolution scheme, intelligent algorithms for robotic grasping, modelling approach for reactive mode handling of flexible manufacturing and design of an advanced controller for robot manipulators. The second part of the book deals with different aspects of robot calibration and sensing. This includes a geometric and treshold calibration of a multiple robotic line-vision system, robot-based inline 2D/3D quality monitoring using picture-giving and laser triangulation, and a study on prospective polymer composite materials for flexible tactile sensors. The third part addresses issues of mobile robots and multi-agent systems, including SLAM of mobile robots based on fusion of odometry and visual data, configuration of a localization system by a team of mobile robots, development of generic real-time motion controller for differential mobile robots, control of fuel cells of mobile robots, modelling of omni-directional wheeled-based robots, building of hunter- hybrid tracking environment, as well as design of a cooperative control in distributed population-based multi-agent approach. The fourth part presents recent approaches and results in humanoid and bioinspirative robotics. It deals with design of adaptive control of anthropomorphic biped gait, building of dynamic-based simulation for humanoid robot walking, building controller for perceptual motor control dynamics of humans and biomimetic approach to control mechatronic structure using smart materials

Orchard mapping and mobile robot localisation using on-board camera and laser scanner data fusion

Agricultural mobile robots have great potential to effectively implement different agricultural tasks. They can save human labour costs, avoid the need for people having to perform risky operations and increase productivity. Automation and advanced sensing technologies can provide up-to-date information that helps farmers in orchard management. Data collected from on-board sensors on a mobile robot provide information that can help the farmer detect tree or fruit diseases or damage, measure tree canopy volume and monitor fruit development. In orchards, trees are natural landmarks providing suitable cues for mobile robot localisation and navigation as trees are nominally planted in straight and parallel rows. This thesis presents a novel tree trunk detection algorithm that detects trees and discriminates between trees and non-tree objects in the orchard using a camera and 2D laser scanner data fusion. A local orchard map of the individual trees was developed allowing the mobile robot to navigate to a specific tree in the orchard to perform a specific task such as tree inspection. Furthermore, this thesis presents a localisation algorithm that does not rely on GPS positions and depends only on the on-board sensors of the mobile robot without adding any artificial landmarks, respective tapes or tags to the trees. The novel tree trunk detection algorithm combined the features extracted from a low cost camera's images and 2D laser scanner data to increase the robustness of the detection. The developed algorithm used a new method to detect the edge points and determine the width of the tree trunks and non-tree objects from the laser scan data. Then a projection of the edge points from the laser scanner coordinates to the image plane was implemented to construct a region of interest with the required features for tree trunk colour and edge detection. The camera images were used to verify the colour and the parallel edges of the tree trunks and non-tree objects. The algorithm automatically adjusted the colour detection parameters after each test which was shown to increase the detection accuracy. The orchard map was constructed based on tree trunk detection and consisted of the 2D positions of the individual trees and non-tree objects. The map of the individual trees was used as an a priority map for mobile robot localisation. A data fusion algorithm based on an Extended Kalman filter was used for pose estimation of the mobile robot in different paths (midway between rows, close to the rows and moving around trees in the row) and different turns (semi-circle and right angle turns) required for tree inspection tasks. The 2D positions of the individual trees were used in the correction step of the Extended Kalman filter to enhance localisation accuracy. Experimental tests were conducted in a simulated environment and a real orchard to evaluate the performance of the developed algorithms. The tree trunk detection algorithm was evaluated under two broad illumination conditions (sunny and cloudy). The algorithm was able to detect the tree trunks (regular and thin tree trunks) and discriminate between trees and non-tree objects with a detection accuracy of 97% showing that the fusion of both vision and 2D laser scanner technologies produced robust tree trunk detection. The mapping method successfully localised all the trees and non-tree objects of the tested tree rows in the orchard environment. The mapping results indicated that the constructed map can be reliably used for mobile robot localisation and navigation. The localisation algorithm was evaluated against the logged RTK-GPS positions for different paths and headland turns. The average of the RMS of the position error in x, y coordinates and Euclidean distance were 0.08 m, 0.07 m and 0.103 m respectively, whilst the average of the RMS of the heading error was 3:32°. These results were considered acceptable while driving along the rows and when executing headland turns for the target application of autonomous mobile robot navigation and tree inspection tasks in orchards

A Novel Approach To Intelligent Navigation Of A Mobile Robot In A Dynamic And Cluttered Indoor Environment

The need and rationale for improved solutions to indoor robot navigation is increasingly driven by the influx of domestic and industrial mobile robots into the market. This research has developed and implemented a novel navigation technique for a mobile robot operating in a cluttered and dynamic indoor environment. It divides the indoor navigation problem into three distinct but interrelated parts, namely, localization, mapping and path planning. The localization part has been addressed using dead-reckoning (odometry). A least squares numerical approach has been used to calibrate the odometer parameters to minimize the effect of systematic errors on the performance, and an intermittent resetting technique, which employs RFID tags placed at known locations in the indoor environment in conjunction with door-markers, has been developed and implemented to mitigate the errors remaining after the calibration. A mapping technique that employs a laser measurement sensor as the main exteroceptive sensor has been developed and implemented for building a binary occupancy grid map of the environment. A-r-Star pathfinder, a new path planning algorithm that is capable of high performance both in cluttered and sparse environments, has been developed and implemented. Its properties, challenges, and solutions to those challenges have also been highlighted in this research. An incremental version of the A-r-Star has been developed to handle dynamic environments. Simulation experiments highlighting properties and performance of the individual components have been developed and executed using MATLAB. A prototype world has been built using the WebotsTM robotic prototyping and 3-D simulation software. An integrated version of the system comprising the localization, mapping and path planning techniques has been executed in this prototype workspace to produce validation results

Unmanned Ground Robots for Rescue Tasks

This chapter describes two unmanned ground vehicles that can help search and rescue teams in their difficult, but life-saving tasks. These robotic assets have been developed within the framework of the European project ICARUS. The large unmanned ground vehicle is intended to be a mobile base station. It is equipped with a powerful manipulator arm and can be used for debris removal, shoring operations, and remote structural operations (cutting, welding, hammering, etc.) on very rough terrain. The smaller unmanned ground vehicle is also equipped with an array of sensors, enabling it to search for victims inside semi-destroyed buildings. Working together with each other and the human search and rescue workers, these robotic assets form a powerful team, increasing the effectiveness of search and rescue operations, as proven by operational validation tests in collaboration with end users