Efficient Unified Arithmetic for Hardware Cryptography

The basic arithmetic operations (i.e. addition, multiplication, and inversion) in finite fields, GF(q), where q = pk and p is a prime integer, have several applications in cryptography, such as RSA algorithm, Diffie-Hellman key exchange algorithm [1], the US federal Digital Signature Standard [2], elliptic curve cryptography [3, 4], and also recently identity based cryptography [5, 6]. Most popular finite fields that are heavily used in cryptographic applications due to elliptic curve based schemes are prime fields GF(p) and binary extension fields GF(2n). Recently, identity based cryptography based on pairing operations defined over elliptic curve points has stimulated a significant level of interest in the arithmetic of ternary extension fields, GF(3^n)

A versatile Montgomery multiplier architecture with characteristic three support

We present a novel unified core design which is extended to realize Montgomery multiplication in the fields GF(2n), GF(3m), and GF(p). Our unified design supports RSA and elliptic curve schemes, as well as the identity-based encryption which requires a pairing computation on an elliptic curve. The architecture is pipelined and is highly scalable. The unified core utilizes the redundant signed digit representation to reduce the critical path delay. While the carry-save representation used in classical unified architectures is only good for addition and multiplication operations, the redundant signed digit representation also facilitates efficient computation of comparison and subtraction operations besides addition and multiplication. Thus, there is no need for a transformation between the redundant and the non-redundant representations of field elements, which would be required in the classical unified architectures to realize the subtraction and comparison operations. We also quantify the benefits of the unified architectures in terms of area and critical path delay. We provide detailed implementation results. The metric shows that the new unified architecture provides an improvement over a hypothetical non-unified architecture of at least 24.88%, while the improvement over a classical unified architecture is at least 32.07%

Efficient long division via Montgomery multiply

We present a novel right-to-left long division algorithm based on the Montgomery modular multiply, consisting of separate highly efficient loops with simply carry structure for computing first the remainder (x mod q) and then the quotient floor(x/q). These loops are ideally suited for the case where x occupies many more machine words than the divide modulus q, and are strictly linear time in the "bitsize ratio" lg(x)/lg(q). For the paradigmatic performance test of multiword dividend and single 64-bit-word divisor, exploitation of the inherent data-parallelism of the algorithm effectively mitigates the long latency of hardware integer MUL operations, as a result of which we are able to achieve respective costs for remainder-only and full-DIV (remainder and quotient) of 6 and 12.5 cycles per dividend word on the Intel Core 2 implementation of the x86_64 architecture, in single-threaded execution mode. We further describe a simple "bit-doubling modular inversion" scheme, which allows the entire iterative computation of the mod-inverse required by the Montgomery multiply at arbitrarily large precision to be performed with cost less than that of a single Newtonian iteration performed at the full precision of the final result. We also show how the Montgomery-multiply-based powering can be efficiently used in Mersenne and Fermat-number trial factorization via direct computation of a modular inverse power of 2, without any need for explicit radix-mod scalings.Comment: 23 pages; 8 tables v2: Tweak formatting, pagecount -= 2. v3: Fix incorrect powers of R in formulae [7] and [11] v4: Add Eldridge & Walter ref. v5: Clarify relation between Algos A/A',D and Hensel-div; clarify true-quotient mechanics; Add Haswell timings, refs to Agner Fog timings pdf and GMP asm-timings ref-page. v6: Remove stray +bw in MULL line of Algo D listing; add note re byte-LUT for qinv_

Analysis of Parallel Montgomery Multiplication in CUDA

For a given level of security, elliptic curve cryptography (ECC) offers improved efficiency over classic public key implementations. Point multiplication is the most common operation in ECC and, consequently, any significant improvement in perfor- mance will likely require accelerating point multiplication. In ECC, the Montgomery algorithm is widely used for point multiplication. The primary purpose of this project is to implement and analyze a parallel implementation of the Montgomery algorithm as it is used in ECC. Specifically, the performance of CPU-based Montgomery multiplication and a GPU-based implementation in CUDA are compared

Low Power Elliptic Curve Cryptography

This M.S. thesis introduces new modulus scaling techniques for transforming a class of primes into special forms which enable efficient arithmetic. The scaling technique may be used to improve multiplication and inversion in finite fields. We present an efficient inversion algorithm that utilizes the structure of a scaled modulus. Our inversion algorithm exhibits superior performance to the Euclidean algorithm and lends itself to efficient hardware implementation due to its simplicity. Using the scaled modulus technique and our specialized inversion algorithm we develop an elliptic curve processor architecture. The resulting architecture successfully utilizes redundant representation of elements in GF(p) and provides a low-power, high speed, and small footprint specialized elliptic curve implementation. We also introduce a unified Montgomery multiplier architecture working on the extension fields GF(p), GF(2) and GF(3). With the increasing research activity for identity based encryption schemes, there has been an increasing need for arithmetic operations in field GF(3). Since we based our research on low-power and small footprint applications, we designed a unified architecture rather than having a seperate hardware for GF{3}. To the best of our knowledge, this is the first time a unified architecture was built working on three different extension fields

Efficient Implementations of Pairing-Based Cryptography on Embedded Systems

Many cryptographic applications use bilinear pairing such as identity based signature, instance identity-based key agreement, searchable public-key encryption, short signature scheme, certificate less encryption and blind signature. Elliptic curves over finite field are the most secure and efficient way to implement bilinear pairings for the these applications. Pairing based cryptosystems are being implemented on different platforms such as low-power and mobile devices. Recently, hardware capabilities of embedded devices have been emerging which can support efficient and faster implementations of pairings on hand-held devices. In this thesis, the main focus is optimization of Optimal Ate-pairing using special class of ordinary curves, Barreto-Naehring (BN), for different security levels on low-resource devices with ARM processors. Latest ARM architectures are using SIMD instructions based NEON engine and are helpful to optimize basic algorithms. Pairing implementations are being done using tower field which use field multiplication as the most important computation. This work presents NEON implementation of two multipliers (Karatsuba and Schoolbook) and compare the performance of these multipliers with different multipliers present in the literature for different field sizes. This work reports the fastest implementation timing of pairing for BN254, BN446 and BN638 curves for ARMv7 architecture which have security levels as 128-, 164-, and 192-bit, respectively. This work also presents comparison of code performance for ARMv8 architectures

Enhancing an embedded processor core for efficient and isolated execution of cryptographic algorithms

We propose enhancing a reconfigurable and extensible embedded RISC processor core with a protected zone for isolated execution of cryptographic algorithms. The protected zone is a collection of processor subsystems such as functional units optimized for high-speed execution of integer operations, a small amount of local memory for storing sensitive data during cryptographic computations, and special-purpose and cryptographic registers to execute instructions securely. We outline the principles for secure software implementations of cryptographic algorithms in a processor equipped with the proposed protected zone. We demonstrate the efficiency and effectiveness of our proposed zone by implementing the most-commonly used cryptographic algorithms in the protected zone; namely RSA, elliptic curve cryptography, pairing-based cryptography, AES block cipher, and SHA-1 and SHA-256 cryptographic hash functions. In terms of time efficiency, our software implementations of cryptographic algorithms running on the enhanced core compare favorably with equivalent software implementations on similar processors reported in the literature. The protected zone is designed in such a modular fashion that it can easily be integrated into any RISC processor. The proposed enhancements for the protected zone are realized on an FPGA device. The implementation results on the FPGA confirm that its area overhead is relatively moderate in the sense that it can be used in many embedded processors. Finally, the protected zone is useful against cold-boot and micro-architectural side-channel attacks such as cache-based and branch prediction attacks

Improved quantum circuits for elliptic curve discrete logarithms

We present improved quantum circuits for elliptic curve scalar multiplication, the most costly component in Shor's algorithm to compute discrete logarithms in elliptic curve groups. We optimize low-level components such as reversible integer and modular arithmetic through windowing techniques and more adaptive placement of uncomputing steps, and improve over previous quantum circuits for modular inversion by reformulating the binary Euclidean algorithm. Overall, we obtain an affine Weierstrass point addition circuit that has lower depth and uses fewer $T$ gates than previous circuits. While previous work mostly focuses on minimizing the total number of qubits, we present various trade-offs between different cost metrics including the number of qubits, circuit depth and $T$-gate count. Finally, we provide a full implementation of point addition in the Q# quantum programming language that allows unit tests and automatic quantum resource estimation for all components.Comment: 22 pages, to appear in: Int'l Conf. on Post-Quantum Cryptography (PQCrypto 2020

Frequency Domain Finite Field Arithmetic for Elliptic Curve Cryptography

Efficient implementation of the number theoretic transform(NTT), also known as the discrete Fourier transform(DFT) over a finite field, has been studied actively for decades and found many applications in digital signal processing. In 1971 Schonhage and Strassen proposed an NTT based asymptotically fast multiplication method with the asymptotic complexity O(m log m log log m) for multiplication of $m$-bit integers or (m-1)st degree polynomials. Schonhage and Strassen\u27s algorithm was known to be the asymptotically fastest multiplication algorithm until Furer improved upon it in 2007. However, unfortunately, both algorithms bear significant overhead due to the conversions between the time and frequency domains which makes them impractical for small operands, e.g. less than 1000 bits in length as used in many applications. With this work we investigate for the first time the practical application of the NTT, which found applications in digital signal processing, to finite field multiplication with an emphasis on elliptic curve cryptography(ECC). We present efficient parameters for practical application of NTT based finite field multiplication to ECC which requires key and operand sizes as short as 160 bits in length. With this work, for the first time, the use of NTT based finite field arithmetic is proposed for ECC and shown to be efficient. We introduce an efficient algorithm, named DFT modular multiplication, for computing Montgomery products of polynomials in the frequency domain which facilitates efficient multiplication in GF(p^m). Our algorithm performs the entire modular multiplication, including modular reduction, in the frequency domain, and thus eliminates costly back and forth conversions between the frequency and time domains. We show that, especially in computationally constrained platforms, multiplication of finite field elements may be achieved more efficiently in the frequency domain than in the time domain for operand sizes relevant to ECC. This work presents the first hardware implementation of a frequency domain multiplier suitable for ECC and the first hardware implementation of ECC in the frequency domain. We introduce a novel area/time efficient ECC processor architecture which performs all finite field arithmetic operations in the frequency domain utilizing DFT modular multiplication over a class of Optimal Extension Fields(OEF). The proposed architecture achieves extension field modular multiplication in the frequency domain with only a linear number of base field GF(p) multiplications in addition to a quadratic number of simpler operations such as addition and bitwise rotation. With its low area and high speed, the proposed architecture is well suited for ECC in small device environments such as smart cards and wireless sensor networks nodes. Finally, we propose an adaptation of the Itoh-Tsujii algorithm to the frequency domain which can achieve efficient inversion in a class of OEFs relevant to ECC. This is the first time a frequency domain finite field inversion algorithm is proposed for ECC and we believe our algorithm will be well suited for efficient constrained hardware implementations of ECC in affine coordinates