4,013 research outputs found
Distributed and adaptive location identification system for mobile devices
Indoor location identification and navigation need to be as simple, seamless,
and ubiquitous as its outdoor GPS-based counterpart is. It would be of great
convenience to the mobile user to be able to continue navigating seamlessly as
he or she moves from a GPS-clear outdoor environment into an indoor environment
or a GPS-obstructed outdoor environment such as a tunnel or forest. Existing
infrastructure-based indoor localization systems lack such capability, on top
of potentially facing several critical technical challenges such as increased
cost of installation, centralization, lack of reliability, poor localization
accuracy, poor adaptation to the dynamics of the surrounding environment,
latency, system-level and computational complexities, repetitive
labor-intensive parameter tuning, and user privacy. To this end, this paper
presents a novel mechanism with the potential to overcome most (if not all) of
the abovementioned challenges. The proposed mechanism is simple, distributed,
adaptive, collaborative, and cost-effective. Based on the proposed algorithm, a
mobile blind device can potentially utilize, as GPS-like reference nodes,
either in-range location-aware compatible mobile devices or preinstalled
low-cost infrastructure-less location-aware beacon nodes. The proposed approach
is model-based and calibration-free that uses the received signal strength to
periodically and collaboratively measure and update the radio frequency
characteristics of the operating environment to estimate the distances to the
reference nodes. Trilateration is then used by the blind device to identify its
own location, similar to that used in the GPS-based system. Simulation and
empirical testing ascertained that the proposed approach can potentially be the
core of future indoor and GPS-obstructed environments
Hybrid Radio-map for Noise Tolerant Wireless Indoor Localization
In wireless networks, radio-map based locating techniques are commonly used
to cope the complex fading feature of radio signal, in which a radio-map is
built by calibrating received signal strength (RSS) signatures at training
locations in the offline phase. However, in severe hostile environments, such
as in ship cabins where severe shadowing, blocking and multi-path fading
effects are posed by ubiquitous metallic architecture, even radio-map cannot
capture the dynamics of RSS. In this paper, we introduced multiple feature
radio-map location method for severely noisy environments. We proposed to add
low variance signature into radio map. Since the low variance signatures are
generally expensive to obtain, we focus on the scenario when the low variance
signatures are sparse. We studied efficient construction of multi-feature
radio-map in offline phase, and proposed feasible region narrowing down and
particle based algorithm for online tracking. Simulation results show the
remarkably performance improvement in terms of positioning accuracy and
robustness against RSS noises than the traditional radio-map method.Comment: 6 pages, 11th IEEE International Conference on Networking, Sensing
and Control, April 7-9, 2014, Miami, FL, US
Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition
The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future
Fingerprinting-Based Positioning in Distributed Massive MIMO Systems
Location awareness in wireless networks may enable many applications such as
emergency services, autonomous driving and geographic routing. Although there
are many available positioning techniques, none of them is adapted to work with
massive multiple-in-multiple-out (MIMO) systems, which represent a leading 5G
technology candidate. In this paper, we discuss possible solutions for
positioning of mobile stations using a vector of signals at the base station,
equipped with many antennas distributed over deployment area. Our main proposal
is to use fingerprinting techniques based on a vector of received signal
strengths. This kind of methods are able to work in highly-cluttered multipath
environments, and require just one base station, in contrast to standard
range-based and angle-based techniques. We also provide a solution for
fingerprinting-based positioning based on Gaussian process regression, and
discuss main applications and challenges.Comment: Proc. of IEEE 82nd Vehicular Technology Conference (VTC2015-Fall
Dial It In: Rotating RF Sensors to Enhance Radio Tomography
A radio tomographic imaging (RTI) system uses the received signal strength
(RSS) measured by RF sensors in a static wireless network to localize people in
the deployment area, without having them to carry or wear an electronic device.
This paper addresses the fact that small-scale changes in the position and
orientation of the antenna of each RF sensor can dramatically affect imaging
and localization performance of an RTI system. However, the best placement for
a sensor is unknown at the time of deployment. Improving performance in a
deployed RTI system requires the deployer to iteratively "guess-and-retest",
i.e., pick a sensor to move and then re-run a calibration experiment to
determine if the localization performance had improved or degraded. We present
an RTI system of servo-nodes, RF sensors equipped with servo motors which
autonomously "dial it in", i.e., change position and orientation to optimize
the RSS on links of the network. By doing so, the localization accuracy of the
RTI system is quickly improved, without requiring any calibration experiment
from the deployer. Experiments conducted in three indoor environments
demonstrate that the servo-nodes system reduces localization error on average
by 32% compared to a standard RTI system composed of static RF sensors.Comment: 9 page
AoA-aware Probabilistic Indoor Location Fingerprinting using Channel State Information
With expeditious development of wireless communications, location
fingerprinting (LF) has nurtured considerable indoor location based services
(ILBSs) in the field of Internet of Things (IoT). For most pattern-matching
based LF solutions, previous works either appeal to the simple received signal
strength (RSS), which suffers from dramatic performance degradation due to
sophisticated environmental dynamics, or rely on the fine-grained physical
layer channel state information (CSI), whose intricate structure leads to an
increased computational complexity. Meanwhile, the harsh indoor environment can
also breed similar radio signatures among certain predefined reference points
(RPs), which may be randomly distributed in the area of interest, thus mightily
tampering the location mapping accuracy. To work out these dilemmas, during the
offline site survey, we first adopt autoregressive (AR) modeling entropy of CSI
amplitude as location fingerprint, which shares the structural simplicity of
RSS while reserving the most location-specific statistical channel information.
Moreover, an additional angle of arrival (AoA) fingerprint can be accurately
retrieved from CSI phase through an enhanced subspace based algorithm, which
serves to further eliminate the error-prone RP candidates. In the online phase,
by exploiting both CSI amplitude and phase information, a novel bivariate
kernel regression scheme is proposed to precisely infer the target's location.
Results from extensive indoor experiments validate the superior localization
performance of our proposed system over previous approaches
- …