Wide Bandwidth - High Accuracy Control Loops in the presence of Slow Varying Signals and Applications in Active Matrix Organic Light Emitting Displays and Sensor Arrays

This dissertation deals with the problems of modern active matrix organic light-emitting diode AMOLED display back-plane drivers and sensor arrays. The research described here, aims to classify recently utilized compensation techniques into distinct groups and further pinpoint their advantages and shortcomings. Additionally, a way of describing the loops as mathematical constructs is utilized to derive new circuits from the analog design perspective. A novel principle on display driving is derived by observing those mathematical control loop models and it is analyzed and evaluated as a novel way of pixel driving. Specifically, a new feedback current programming architecture and method is described and validated through experiments, which is compatible with AMOLED displays having the two transistor one capacitor (2T1C) pixel structure. The new pixel programming approach is compatible with all TFT technologies and can compensate for non-uniformities in both threshold voltage and carrier mobility of the pixel OLED drive TFT. Data gathered show that a pixel drive current of 20 nA can be programmed in less than 10usec. This new approach can be implemented within an AMOLED external or integrated display data driver. The method to achieve robustness in the operation of the loop is also presented here, observed through a series of measurements. All the peripheral blocks implementing the design are presented and analyzed through simulations and verified experimentally. Sources of noise are identified and eliminated, while new techniques for better isolation from digital noise are described and tested on a newly fabricated driver. Multiple versions of the new proposed circuit are outlined, simulated, fabricated and measured to evaluate their performance.A novel active matrix array approach suitable for a compact multi-channel gas sensor platform is also described. The proposed active matrix sensor array utilizes an array of P-i-N diodes each connected in series with an Inter-Digitated Electrode (IDE). The functionality of 8x8 and 16x16 sensor arrays measured through external current feedback loops is also presented for the 8x8 arrays and the detection of ammonia (NH3) and chlorine (Cl2) vapor sources is demonstrated

The 2021 flexible and printed electronics roadmap

This roadmap includes the perspectives and visions of leading researchers in the key areas of flexible and printable electronics. The covered topics are broadly organized by the device technologies (sections 1–9), fabrication techniques (sections 10–12), and design and modeling approaches (sections 13 and 14) essential to the future development of new applications leveraging flexible electronics (FE). The interdisciplinary nature of this field involves everything from fundamental scientific discoveries to engineering challenges; from design and synthesis of new materials via novel device design to modelling and digital manufacturing of integrated systems. As such, this roadmap aims to serve as a resource on the current status and future challenges in the areas covered by the roadmap and to highlight the breadth and wide-ranging opportunities made available by FE technologies

Active Matrix Flexible Sensory Systems: Materials, Design, Fabrication, and Integration

A variety of modern applications including soft robotics, prosthetics, and health monitoring devices that cover electronic skins (e-skins), wearables as well as implants have been developed within the last two decades to bridge the gap between artificial and biological systems. During this development, high-density integration of various sensing modalities into flexible electronic devices becomes vitally important to improve the perception and interaction of the human bodies and robotic appliances with external environment. As a key component in flexible electronics, the flexible thin-film transistors (TFTs) have seen significant advances, allowing for building flexible active matrices. The flexible active matrices have been integrated with distributed arrays of sensing elements, enabling the detection of signals over a large area. The integration of sensors within pixels of flexible active matrices has brought the application scenarios to a higher level of sophistication with many advanced functionalities. Herein, recent progress in the active matrix flexible sensory systems is reviewed. The materials used to construct the semiconductor channels, the dielectric layers, and the flexible substrates for the active matrices are summarized. The pixel designs and fabrication strategies for the active matrix flexible sensory systems are briefly discussed. The applications of the flexible sensory systems are exemplified by reviewing pressure sensors, temperature sensors, photodetectors, magnetic sensors, and biosignal sensors. At the end, the recent development is summarized and the vision on the further advances of flexible active matrix sensory systems is provided

On variability and reliability of poly-Si thin-film transistors

In contrast to conventional bulk-silicon technology, polysilicon (poly-Si) thin-film transistors (TFTs) can be implanted in flexible substrate and can have low process temperature. These attributes make poly-Si TFT technology more attractive for new applications, such as flexible displays, biosensors, and smart clothing. However, due to the random nature of grain boundaries (GBs) in poly-Si film and self-heating enhanced negative bias temperature instability (NBTI), the variability and reliability of poly-Si TFTs are the main obstacles that impede the application of poly-Si TFTs in high-performance circuits. The primary focus of this dissertation is to develop new design methodologies and modeling techniques for facilitating new applications of poly-Si TFT technology. In order to do that, a physical model is first presented to characterize the GB-induced transistor threshold voltage (V th)variations considering not only the number but also the position and orientation of each GB in 3-D space. The fast computation time of the proposed model makes it suitable for evaluation of GB-induced transistor Vthvariation in the early design phase. Furthermore, a self-consistent electro-thermal model that considers the effects of device geometry, substrate material, and stress conditions on NBTI is proposed. With the proposed modeling methodology, the significant impacts of device geometry, substrate, and supply voltage on NBTI in poly-Si TFTs are shown. From a circuit design perspective, a voltage programming pixel circuit is developed for active-matrix organic light emitting diode (AMOLED) displays for compensating the shift of Vth and mobility in driver TFTs as well as compensating the supply voltage degradation. In addition, a self-repair design methodology is proposed to compensate the GB-induced variations for liquid crystal displays (LCDs) and AMOLED displays. Based on the simulation results, the proposed circuit can decrease the required supply voltage by 20% without performance and yield degradation. In the final section of this dissertation, an optimization methodology for circuit-level reliability tests is explored. To effectively predict circuit lifetime, accelerated aging (i.e. elevated voltage and temperature) is commonly applied in circuit-level reliability tests, such as constant voltage stress (CVS) and ramp voltage stress (RVS) tests. However, due to the accelerated aging, shifting of dominant degradation mechanism might occur leading to the wrong lifetime prediction. To get around this issue, we proposed a technique to determine the proper stress range for accelerated aging tests

Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors

The development of a robust method for integrating high-performance semiconductors on flexible plastics could enable exciting avenues in fundamental research and novel applications. One area of vital relevance is chemical and biological sensing, which if implemented on biocompatible substrates, could yield breakthroughs in implantable or wearable monitoring systems. Semiconducting nanowires (and nanotubes) are particularly sensitive chemical sensors because of their high surface-to-volume ratios. Here, we present a scalable and parallel process for transferring hundreds of pre-aligned silicon nanowires onto plastic to yield highly ordered films for low-power sensor chips. The nanowires are excellent field-effect transistors, and, as sensors, exhibit parts-per-billion sensitivity to NO_2, a hazardous pollutant. We also use SiO_2 surface chemistries to construct a 'nano-electronic nose' library, which can distinguish acetone and hexane vapours via distributed responses. The excellent sensing performance coupled with bendable plastic could open up opportunities in portable, wearable or even implantable sensors

Self-Healing of Open-Circuit Faults in Organic Thin-Film Transistor-Based Flexible Electronics

Flexible electronics has attracted tremendous attention due to the fast-growing market for portable devices and sensors. However, these devices usually suffer from internal and external forces, which can lead to the failure of interconnects in the circuit. To address this issue, some passive and active strategies have been developed for improving the reliability of interconnects in circuits. Although all these strategies are effective in tackling problems related to the mechanical stress, they have inherent limit in dealing with other failure causes or repairing the open fault. Therefore, in this dissertation, a particle-based self-healing (PBSH) technique has been developed. The detailed study starts with an overall review of the state of the art in techniques developed for improving the reliability of interconnects in flexible circuits. Then the mechanisms of the PBSH technique are analysed and the chemical treatment of metal particles are explored. The physical modelling of the healing is established, and relations between the healing time with the suspension concentration, electric field, length of open gap, and external resistance are verified by experimental results. In addition, to avoid the inherent conductivity of the suspension and the aggregation of micro-particles, they are modified by the oleic acid. This chemical treatment of metal particles improves the uniformity of the suspension and sets a threshold electric field for the occurrence of self-healing. As a key component in flexible circuits, an organic thin-film transistor (OTFT) fabricated by all inkjet-printing process has been developed and characterised in this study. This transistor uses 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPSPentacene) as the semiconductor, poly (vinyl cinnamate) (PVC) as the dielectric, silver as the electrodes, and CYTOP as the encapsulation. Based on this device, two basic circuits: the current mirror and the common-source (CS) amplifier have been successfully built on flexible substrates. The proper functioning of the printed devices and circuits becomes the base for the study of the self-healing in flexible circuits. Subsequently, the PBSH in OTFT device and circuit interconnects is verified. This technique can successfully repair open faults at both source and drain sides in OTFT device interconnects. Simultaneously, it can heal open faults occurring at different locations in flexible current mirror and common-source amplifier circuits biased at the static state. Moreover, the self-healing is also proved to be effective and stable in common-source amplifier when processing alternating current (AC) signals. In order to demonstrate the feasibility of the PBSH technique in real-world applications, more performance characterisations have been conducted. The bending test shows the reliability and stability of the healing in the bent condition. And the dualfaults test verifies the ability of the PBSH technique for healing more than one open fault in interconnects. In addition, methods of packaging the circuit and confining the healing material in the expected region are also developed, which prove the feasibility and manufacturability of the PBSH technique in integrated circuits. This study sets a new benchmark for improving the reliability of inkjet-printed flexible circuits

Eurodisplay 2019

The collection includes abstracts of reports selected by the program by the conference committee