3,553 research outputs found
A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead
Physical layer security which safeguards data confidentiality based on the
information-theoretic approaches has received significant research interest
recently. The key idea behind physical layer security is to utilize the
intrinsic randomness of the transmission channel to guarantee the security in
physical layer. The evolution towards 5G wireless communications poses new
challenges for physical layer security research. This paper provides a latest
survey of the physical layer security research on various promising 5G
technologies, including physical layer security coding, massive multiple-input
multiple-output, millimeter wave communications, heterogeneous networks,
non-orthogonal multiple access, full duplex technology, etc. Technical
challenges which remain unresolved at the time of writing are summarized and
the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Will SDN be part of 5G?
For many, this is no longer a valid question and the case is considered
settled with SDN/NFV (Software Defined Networking/Network Function
Virtualization) providing the inevitable innovation enablers solving many
outstanding management issues regarding 5G. However, given the monumental task
of softwarization of radio access network (RAN) while 5G is just around the
corner and some companies have started unveiling their 5G equipment already,
the concern is very realistic that we may only see some point solutions
involving SDN technology instead of a fully SDN-enabled RAN. This survey paper
identifies all important obstacles in the way and looks at the state of the art
of the relevant solutions. This survey is different from the previous surveys
on SDN-based RAN as it focuses on the salient problems and discusses solutions
proposed within and outside SDN literature. Our main focus is on fronthaul,
backward compatibility, supposedly disruptive nature of SDN deployment,
business cases and monetization of SDN related upgrades, latency of general
purpose processors (GPP), and additional security vulnerabilities,
softwarization brings along to the RAN. We have also provided a summary of the
architectural developments in SDN-based RAN landscape as not all work can be
covered under the focused issues. This paper provides a comprehensive survey on
the state of the art of SDN-based RAN and clearly points out the gaps in the
technology.Comment: 33 pages, 10 figure
Enabling RAN Slicing Through Carrier Aggregation in mmWave Cellular Networks
The ever increasing number of connected devices and of new and heterogeneous
mobile use cases implies that 5G cellular systems will face demanding technical
challenges. For example, Ultra-Reliable Low-Latency Communication (URLLC) and
enhanced Mobile Broadband (eMBB) scenarios present orthogonal Quality of
Service (QoS) requirements that 5G aims to satisfy with a unified Radio Access
Network (RAN) design. Network slicing and mmWave communications have been
identified as possible enablers for 5G. They provide, respectively, the
necessary scalability and flexibility to adapt the network to each specific use
case environment, and low latency and multi-gigabit-per-second wireless links,
which tap into a vast, currently unused portion of the spectrum. The
optimization and integration of these technologies is still an open research
challenge, which requires innovations at different layers of the protocol
stack. This paper proposes to combine them in a RAN slicing framework for
mmWaves, based on carrier aggregation. Notably, we introduce MilliSlice, a
cross-carrier scheduling policy that exploits the diversity of the carriers and
maximizes their utilization, thus simultaneously guaranteeing high throughput
for the eMBB slices and low latency and high reliability for the URLLC flows.Comment: 8 pages, 8 figures. Proc. of the 18th Mediterranean Communication and
Computer Networking Conference (MedComNet 2020), Arona, Italy, 202
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
- …