Channel estimation and signal enhancement for DS-CDMA systems

This dissertation focuses on topics of Bayesian-based multiuser detection, space-time (S-T) transceiver design, and S-T channel parameter estimation for direct-sequence code-division multiple-access (DS-CDMA) systems. Using the Bayesian framework, various linear and simplified nonlinear multiuser detectors are proposed, and their performances are analyzed. The simplified non-linear Bayesian solutions can bridge the performance gap between sub-optimal linear multiuser detectors and the optimum multiuser detector. To further improve the system capacity and performance, S-T transceiver design approaches with complexity constraint are investigated. Novel S-T receivers of low-complexity that jointly use the temporal code-signature and the spatial signature are proposed. Our solutions, which lead to generalized near-far resistant S-T RAKE receivers, achieve better interference suppression than the existing S-T RAKE receivers. From transmitter side, we also proposed a transmit diversity (TD) technique in combination with differential detection for the DS-CDMA systems. It is shown that the proposed S-T TD scheme in combination with minimum variance distortionless response transceiver (STTD+MVDR) is near-far resistant and outperforms the conventional STTD and matched filter based (STTD+MF) transceiver scheme. Obtaining channel state information (CSI) is instrumental to optimum S-T transceiver design in wireless systems. Another major focus of this dissertation is to estimate the S-T channel parameters. We proposed an asymptotic, joint maximum likelihood (ML) method of estimating multipath channel parameters for DS-CDMA systems. An iterative estimator is proposed to further simplify the computation. Analytical and simulation results show that the iterative estimation scheme is near-far resistant for both time delays and DOAs. And it reaches the corresponding CRBs after a few iterations

Towards 5G wireless systems: A modified Rake receiver for UWB indoor multipath channels

This paper presents a modified receiver based on the conventional Rake receiver for Ultra-Wide Band (UWB) indoor channels of femtocell systems and aims to propose a new solution to mitigate the multipath phenomenon. Furthermore, this work proposes an upgrade for the conventional Rake receiver to fulfill the needs of 5G wireless systems through a new concept named “hybrid femtocell” that joins UWB with millimeter wave (mmWave) signals. The modified receiver is considered to be a part of the UWB/mmWave hybrid femtocell system, where it is developed for confronting the indoor multipath channels and to ensure a flexible transmission based on an Intelligent Controlling System (ICS). Hence, we seek to exploit the circumstances when the channel is less complex to switch the transmission to a higher data rate through higher M-ary Pulse Position Modulation (PPM). Furthermore, an ICS algorithm is proposed and an analytical model is developed followed by performance studies through simulation results. The results show that using the UWB technology through the modified receiver in femtocells could aid in mitigating the multipath effects and ensuring high throughputs. Thus, the UWB based system promotes Internet of Things (IoT) devices in indoor multipath channels of future 5G

Book Review: A Conceptual Review of “Digital Communication Systems”

(Author: Simon Haykin, 2014)Haykin, S. 2014. Digital Communication Systems.John Wiley & Sons, Inc., Hoboken, NJ, USA.Available: <http://www.wiley.com/WileyCDA/WileyTitle/productCd-EHEP001809.html>

Bayesian inversion for finite fault earthquake source models I—theory and algorithm

The estimation of finite fault earthquake source models is an inherently underdetermined problem: there is no unique solution to the inverse problem of determining the rupture history at depth as a function of time and space when our data are limited to observations at the Earth’s surface. Bayesian methods allow us to determine the set of all plausible source model parameters that are consistent with the observations, our a priori assumptions about the physics of the earthquake source and wave propagation, and models for the observation errors and the errors due to the limitations in our forward model. Because our inversion approach does not require inverting any matrices other than covariance matrices, we can restrict our ensemble of solutions to only those models that are physically defensible while avoiding the need to restrict our class of models based on considerations of numerical invertibility. We only use prior information that is consistent with the physics of the problem rather than some artefice (such as smoothing) needed to produce a unique optimal model estimate. Bayesian inference can also be used to estimate model-dependent and internally consistent effective errors due to shortcomings in the forward model or data interpretation, such as poor Green’s functions or extraneous signals recorded by our instruments. Until recently, Bayesian techniques have been of limited utility for earthquake source inversions because they are computationally intractable for problems with as many free parameters as typically used in kinematic finite fault models. Our algorithm, called cascading adaptive transitional metropolis in parallel (CATMIP), allows sampling of high-dimensional problems in a parallel computing framework. CATMIP combines the Metropolis algorithm with elements of simulated annealing and genetic algorithms to dynamically optimize the algorithm’s efficiency as it runs. The algorithm is a generic Bayesian Markov Chain Monte Carlo sampler; it works independently of the model design, a priori constraints and data under consideration, and so can be used for a wide variety of scientific problems. We compare CATMIP’s efficiency relative to several existing sampling algorithms and then present synthetic performance tests of finite fault earthquake rupture models computed using CATMIP

Soft detection and decoding in wideband CDMA systems

A major shift is taking place in the world of telecommunications towards a communications environment where a range of new data services will be available for mobile users. This shift is already visible in several areas of wireless communications, including cellular systems, wireless LANs, and satellite systems. The provision of flexible high-quality wireless data services requires a new approach on both the radio interface specification and the design and the implementation of the various transceiver algorithms. On the other hand, when the processing power available in the receivers increases, more complex receiver algorithms become feasible. The general problem addressed in this thesis is the application of soft detection and decoding algorithms in the wideband code division multiple access (WCDMA) receivers, both in the base stations and in the mobile terminals, so that good performance is achieved but that the computational complexity remains acceptable. In particular, two applications of soft detection and soft decoding are studied: coded multiuser detection in the CDMA base station and improved RAKE-based reception employing soft detection in the mobile terminal. For coded multiuser detection, we propose a novel receiver structure that utilizes the decoding information for multiuser detection. We analyze the performance and derive lower bounds for the capacity of interference cancellation CDMA receivers when using channel coding to improve the reliability of tentative decisions. For soft decision and decoding techniques in the CDMA downlink, we propose a modified maximal ratio combining (MRC) scheme that is more suitable for RAKE receivers in WCDMA mobile terminals than the conventional MRC scheme. We also introduce an improved soft-output RAKE detector that is especially suitable for low spreading gains and high-order modulation schemes. Finally we analyze the gain obtained through the use of Brennan's MRC scheme and our modified MRC scheme. Throughout this thesis Bayesian networks are utilized to develop algorithms for soft detection and decoding problems. This approach originates from the initial stages of this research, where Bayesian networks and algorithms using such graphical models (e.g. the so-called sum-product algorithm) were used to identify new receiver algorithms. In the end, this viewpoint may not be easily noticeable in the final form of the algorithms, mainly because the practical efficiency considerations forced us to select simplified variants of the algorithms. However, this viewpoint is important to emphasize the underlying connection between the apparently different soft detection and decision algorithms described in this thesis.reviewe

Distributed Power Control Techniques Based on Game Theory for Wideband Wireless Networks

This thesis describes a theoretical framework for the design and the analysis of distributed (decentralized) power control algorithms for high-throughput wireless networks using ultrawideband (UWB) technologies. The tools of game theory are shown to be expedient for deriving scalable, energy-efficient, distributed power control schemes to be applied to a population of battery-operated user terminals in a rich multipath environment. In particular, the power control issue is modeled as a noncooperative game in which each user chooses its transmit power so as to maximize its own utility, which is defined as the ratio of throughput to transmit power. Although distributed (noncooperative) control is known to be suboptimal with respect to the optimal centralized (cooperative) solution, it is shown via large-system analysis that the game-theoretic distributed algorithm based on Nash equilibrium exhibits negligible performance degradation with respect to the centralized socially optimal configuration. The framework described here is general enough to also encompass the analysis of code division multiple access (CDMA) systems and to show that UWB slightly outperforms CDMA in terms of achieved utility at the Nash equilibrium

Particle filtering for joint symbol and code delay estimation in DS spread spectrum systems in multipath environment

We develop a new receiver for joint symbol, channel characteristics, and code delay estimation for DS spread spectrum systems under conditions of multipath fading. The approach is based on particle filtering techniques and combines sequential importance sampling, a selection scheme, and a variance reduction technique. Several algorithms involving both deterministic and randomized schemes are considered and an extensive simulation study is carried out in order to demonstrate the performance of the proposed methods.RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are

Frequency and time hopping PPM UWB multiple access communication scheme

In this paper we propose frequency and time hopping pulse position modulation (FTH-PPM) ultra wideband (UWB) for multiple access communications.We have derived and investigated the bit error probability for the multi-user synchronous transmitter case in multipath channels with Additive White Gaussian Noise (AWGN). Simulation results show that bit error probability performance of FTH-PPM UWB out performs the time hopping pulse position modulated (TH-PPM) UWB system. It also show that multiuser capacity of FTH-PPM UWB system is much better than TH-PPM UWB system