Node Energy Based Approach to Improve Network Lifetime and Throughput in Wireless Sensor Networks

Energy consumption is the one of the most important issue in wireless sensor networks. To improve the network lifetime energy consumption in the network must be less. In this paper, a cluster based approach is proposed to increase the network lifetime and throughput of the heterogeneous wireless sensor networks. The proposed approach combined the direct data transmission to base station with the cluster head transmission of data in wireless sensor networks. The proposed scheme uses the twice energy for advanced nodes in comparison to normal nodes. In the proposed approach, it is observed that results are found good with the use of 10 % of advanced nodes along with normal nodes in the network. However, on further increasing the advanced node deployment beyond deployment 30%, network lifetime and throughput of network start degrading. So, the proposed solution with 10% advanced node may be considered as the best suitable and acceptable solution for better network throughput and life time in WSNs

Reliable Energy-Efficient Routing Algorithm for Vehicle-Assisted Wireless Ad-Hoc Networks

We investigate the design of the optimal routing path in a moving vehicles involved the internet of things (IoT). In our model, jammers exist that may interfere with the information exchange between wireless nodes, leading to worsened quality of service (QoS) in communications. In addition, the transmit power of each battery-equipped node is constrained to save energy. We propose a three-step optimal routing path algorithm for reliable and energy-efficient communications. Moreover, results show that with the assistance of moving vehicles, the total energy consumed can be reduced to a large extend. We also study the impact on the optimal routing path design and energy consumption which is caused by path loss, maximum transmit power constrain, QoS requirement, etc.Comment: 6 pages, 5 figures, rejected by IEEE Globecom 2017,resubmit to IEEE WCNC 201

Optimized Cluster-Based Dynamic Energy-Aware Routing Protocol for Wireless Sensor Networks in Agriculture Precision

[EN] Wireless sensor networks (WSNs) are becoming one of the demanding platforms, where sensor nodes are sensing and monitoring the physical or environmental conditions and transmit the data to the base station via multihop routing. Agriculture sector also adopted these networks to promote innovations for environmental friendly farming methods, lower the management cost, and achieve scientific cultivation. Due to limited capabilities, the sensor nodes have suffered with energy issues and complex routing processes and lead to data transmission failure and delay in the sensor-based agriculture fields. Due to these limitations, the sensor nodes near the base station are always relaying on it and cause extra burden on base station or going into useless state. To address these issues, this study proposes a Gateway Clustering Energy-Efficient Centroid- (GCEEC-) based routing protocol where cluster head is selected from the centroid position and gateway nodes are selected from each cluster. Gateway node reduces the data load from cluster head nodes and forwards the data towards the base station. Simulation has performed to evaluate the proposed protocol with state-of-the-art protocols. The experimental results indicated the better performance of proposed protocol and provide more feasible WSN-based monitoring for temperature, humidity, and illumination in agriculture sector.This work has also been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.Qureshi, KN.; Bashir, MU.; Lloret, J.; León Fernández, A. (2020). Optimized Cluster-Based Dynamic Energy-Aware Routing Protocol for Wireless Sensor Networks in Agriculture Precision. Journal of Sensors. 2020:1-19. https://doi.org/10.1155/2020/9040395S1192020Sneha, K., Kamath, R., Balachandra, M., & Prabhu, S. (2019). New Gossiping Protocol for Routing Data in Sensor Networks for Precision Agriculture. Soft Computing and Signal Processing, 139-152. doi:10.1007/978-981-13-3393-4_15Qureshi, K. N., Abdullah, A. H., Bashir, F., Iqbal, S., & Awan, K. M. (2018). Cluster-based data dissemination, cluster head formation under sparse, and dense traffic conditions for vehicular ad hoc networks. International Journal of Communication Systems, 31(8), e3533. doi:10.1002/dac.3533Rault, T., Bouabdallah, A., & Challal, Y. (2014). Energy efficiency in wireless sensor networks: A top-down survey. Computer Networks, 67, 104-122. doi:10.1016/j.comnet.2014.03.027Feng, X., Zhang, J., Ren, C., & Guan, T. (2018). An Unequal Clustering Algorithm Concerned With Time-Delay for Internet of Things. IEEE Access, 6, 33895-33909. doi:10.1109/access.2018.2847036Savaglio, C., Pace, P., Aloi, G., Liotta, A., & Fortino, G. (2019). Lightweight Reinforcement Learning for Energy Efficient Communications in Wireless Sensor Networks. IEEE Access, 7, 29355-29364. doi:10.1109/access.2019.2902371Srbinovska, M., Gavrovski, C., Dimcev, V., Krkoleva, A., & Borozan, V. (2015). Environmental parameters monitoring in precision agriculture using wireless sensor networks. Journal of Cleaner Production, 88, 297-307. doi:10.1016/j.jclepro.2014.04.036Lloret, J., Garcia, M., Bri, D., & Diaz, J. (2009). A Cluster-Based Architecture to Structure the Topology of Parallel Wireless Sensor Networks. Sensors, 9(12), 10513-10544. doi:10.3390/s91210513Qureshi, K. N., Din, S., Jeon, G., & Piccialli, F. (2020). Link quality and energy utilization based preferable next hop selection routing for wireless body area networks. Computer Communications, 149, 382-392. doi:10.1016/j.comcom.2019.10.030Kumar, S. A., & Ilango, P. (2017). The Impact of Wireless Sensor Network in the Field of Precision Agriculture: A Review. Wireless Personal Communications, 98(1), 685-698. doi:10.1007/s11277-017-4890-zAnisi, M. H., Abdul-Salaam, G., & Abdullah, A. H. (2014). A survey of wireless sensor network approaches and their energy consumption for monitoring farm fields in precision agriculture. Precision Agriculture, 16(2), 216-238. doi:10.1007/s11119-014-9371-8Long, D. S., & McCallum, J. D. (2015). On-combine, multi-sensor data collection for post-harvest assessment of environmental stress in wheat. Precision Agriculture, 16(5), 492-504. doi:10.1007/s11119-015-9391-zFu, X., Fortino, G., Li, W., Pace, P., & Yang, Y. (2019). WSNs-assisted opportunistic network for low-latency message forwarding in sparse settings. Future Generation Computer Systems, 91, 223-237. doi:10.1016/j.future.2018.08.031Mehmood, A., Khan, S., Shams, B., & Lloret, J. (2013). Energy-efficient multi-level and distance-aware clustering mechanism for WSNs. International Journal of Communication Systems, 28(5), 972-989. doi:10.1002/dac.2720Pantazis, N. A., Nikolidakis, S. A., & Vergados, D. D. (2013). Energy-Efficient Routing Protocols in Wireless Sensor Networks: A Survey. IEEE Communications Surveys & Tutorials, 15(2), 551-591. doi:10.1109/surv.2012.062612.00084De Farias, C. M., Pirmez, L., Fortino, G., & Guerrieri, A. (2019). A multi-sensor data fusion technique using data correlations among multiple applications. Future Generation Computer Systems, 92, 109-118. doi:10.1016/j.future.2018.09.034Rao, P. C. S., Jana, P. K., & Banka, H. (2016). A particle swarm optimization based energy efficient cluster head selection algorithm for wireless sensor networks. Wireless Networks, 23(7), 2005-2020. doi:10.1007/s11276-016-1270-7Fu, X., Fortino, G., Pace, P., Aloi, G., & Li, W. (2020). Environment-fusion multipath routing protocol for wireless sensor networks. Information Fusion, 53, 4-19. doi:10.1016/j.inffus.2019.06.001Liu, X. (2015). Atypical Hierarchical Routing Protocols for Wireless Sensor Networks: A Review. IEEE Sensors Journal, 15(10), 5372-5383. doi:10.1109/jsen.2015.2445796Jan, N., Javaid, N., Javaid, Q., Alrajeh, N., Alam, M., Khan, Z. A., & Niaz, I. A. (2017). A Balanced Energy-Consuming and Hole-Alleviating Algorithm for Wireless Sensor Networks. IEEE Access, 5, 6134-6150. doi:10.1109/access.2017.2676004Gupta, G. P., Misra, M., & Garg, K. (2014). Energy and trust aware mobile agent migration protocol for data aggregation in wireless sensor networks. Journal of Network and Computer Applications, 41, 300-311. doi:10.1016/j.jnca.2014.01.003Safa, H., Karam, M., & Moussa, B. (2014). PHAODV: Power aware heterogeneous routing protocol for MANETs. Journal of Network and Computer Applications, 46, 60-71. doi:10.1016/j.jnca.2014.07.035Liu, X. (2015). An Optimal-Distance-Based Transmission Strategy for Lifetime Maximization of Wireless Sensor Networks. IEEE Sensors Journal, 15(6), 3484-3491. doi:10.1109/jsen.2014.2372340Brar, G. S., Rani, S., Chopra, V., Malhotra, R., Song, H., & Ahmed, S. H. (2016). Energy Efficient Direction-Based PDORP Routing Protocol for WSN. IEEE Access, 4, 3182-3194. doi:10.1109/access.2016.2576475Abo-Zahhad, M., Ahmed, S. M., Sabor, N., & Sasaki, S. (2015). Mobile Sink-Based Adaptive Immune Energy-Efficient Clustering Protocol for Improving the Lifetime and Stability Period of Wireless Sensor Networks. IEEE Sensors Journal, 15(8), 4576-4586. doi:10.1109/jsen.2015.2424296Huynh, T.-T., Dinh-Duc, A.-V., & Tran, C.-H. (2016). Delay-constrained energy-efficient cluster-based multi-hop routing in wireless sensor networks. Journal of Communications and Networks, 18(4), 580-588. doi:10.1109/jcn.2016.000081Shen, J., Wang, A., Wang, C., Hung, P. C. K., & Lai, C.-F. (2017). An Efficient Centroid-Based Routing Protocol for Energy Management in WSN-Assisted IoT. IEEE Access, 5, 18469-18479. doi:10.1109/access.2017.2749606Awan, K. M., Shah, P. A., Iqbal, K., Gillani, S., Ahmad, W., & Nam, Y. (2019). Underwater Wireless Sensor Networks: A Review of Recent Issues and Challenges. Wireless Communications and Mobile Computing, 2019, 1-20. doi:10.1155/2019/6470359Sajwan, M., Gosain, D., & Sharma, A. K. (2018). CAMP: cluster aided multi-path routing protocol for wireless sensor networks. Wireless Networks, 25(5), 2603-2620. doi:10.1007/s11276-018-1689-0Varga, A. (2010). OMNeT++. Modeling and Tools for Network Simulation, 35-59. doi:10.1007/978-3-642-12331-3_3Lartillot, O., Toiviainen, P., & Eerola, T. (2008). A Matlab Toolbox for Music Information Retrieval. Studies in Classification, Data Analysis, and Knowledge Organization, 261-268. doi:10.1007/978-3-540-78246-9_31Mathur, P., Nielsen, R. H., Prasad, N. R., & Prasad, R. (2016). Data collection using miniature aerial vehicles in wireless sensor networks. IET Wireless Sensor Systems, 6(1), 17-25. doi:10.1049/iet-wss.2014.0120Zou, T., Lin, S., Feng, Q., & Chen, Y. (2016). Energy-Efficient Control with Harvesting Predictions for Solar-Powered Wireless Sensor Networks. Sensors, 16(1), 53. doi:10.3390/s16010053Song, Y., Ma, J., Zhang, X., & Feng, Y. (2012). Design of Wireless Sensor Network-Based Greenhouse Environment Monitoring and Automatic Control System. Journal of Networks, 7(5). doi:10.4304/jnw.7.5.838-844Nikolidakis, S., Kandris, D., Vergados, D., & Douligeris, C. (2013). Energy Efficient Routing in Wireless Sensor Networks Through Balanced Clustering. Algorithms, 6(1), 29-42. doi:10.3390/a6010029Ndzi, D. L., Harun, A., Ramli, F. M., Kamarudin, M. L., Zakaria, A., Shakaff, A. Y. M., … Farook, R. S. (2014). Wireless sensor network coverage measurement and planning in mixed crop farming. Computers and Electronics in Agriculture, 105, 83-94. doi:10.1016/j.compag.2014.04.01

A review of Energy Hole mitigating techniques in multi-hop many to one communication and its significance in IoT oriented Smart City infrastructure

A huge increase in the percentage of the world's urban population poses resource management, especially energy management challenges in smart cities. In this paper, the growing challenges of energy management in smart cities have been explored and the significance of elimination of energy holes in converge cast communication has been discussed. The impact of mitigation of energy holes on the network lifetime and energy efficiency has been thoroughly covered. The particular focus of this work has been on energy-efficient practices in two major key enablers of smart cities namely, the Internet of Things (IoT) and Wireless Sensor Networks (WSNs). In addition, this paper presents a robust survey of state-of-the-art energy-efficient routing and clustering methods in WSNs. A niche energy efficiency issue in WSNs routing has been identified as energy holes and a detailed survey and evaluation of various techniques that mitigate the formation of energy holes and achieve balanced energy-efficient routing has been covered

Improvement of non-uniform node deployment mechanism for corona-based wireless sensor networks

The promising technology of Wireless Sensor Networks (WSNs), lots of applications have been developed for monitoring and tracking in military, commercial, and educational environments. Imbalance energy of sensors causes significant reduction in the lifetime of the network. In corona-based Wireless Sensor Networks (WSNs), nodes that are positioned in coronas near the sink drain their energy faster than others as they are burdened with relaying traffic come from distant coronas forming energy holes in the network. This situation shows significant effects on the network efficiency in terms of lifetime and energy consumption. The network may stop operation prematurely even though there is much energy left unused at the distant nodes. In this thesis, non-uniform node deployments and energy provisioning strategies are proposed to mitigate energy holes problem. These strategies concerns the optimal number of sensors required in each corona in order to balance the energy consumption and to meet the coverage and connectivity requirements in the network. In order to achieve this aim, the number of sensors should be optimized to create sub-balanced coronas in the sense of energy consumption. The energy provisioning technique is proposed for harmonizing the energy consumption among coronas by computing the extra needed energy in every corona. In the proposed mechanism, the energy required in each corona for balanced energy consumption is computed by determining the initial energy in each node with respect to its corona, and according to the corona load while satisfying the network coverage and connectivity requirements. The theoretical design and modeling of the proposed sensors placement strategy promise a considerable improvement in the lifetime of corona-based networks. The proposed technique could improve the network lifetime noticeably via fair balancing of energy consumption ratio among coronas about 9.4 times more than other work. This is confirmed by the evaluation results that have been showed that the proposed solution offers efficient energy distribution that can enhance the lifetime about 40% compared to previous research works

Minimum energy transmission forest-based Geocast in software-defined wireless sensor networks

© 2021 The Authors. Published by Wiley. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.1002/ett.4253Wireless Sensor Networks (WSNs)-based geographic addressing and routing have many potential applications. Geocast protocols should be made energy efficient to increase the lifetime of nodes and packet delivery ratio. This technique will increase the number of live nodes, reduce message costs, and enhance network throughput. All geocast protocols in the literature of WSN apply mostly restricted flooding and perimeter flooding, which is why still the redundancy they produce significantly high message transmission costs and unnecessarily eats up immense energy in nodes. Moreover, perimeter flooding cannot succeed in the presence of holes. The present article models wireless sensor networks with software-defined constructs where the network area is divided into some zones. Energy-efficient transmission tree(s) are constructed in the geocast area to organize the flow of data packets and their links. Therefore, redundancy in the transmission is eliminated while maintaining network throughput as good as regular flooding. This proposed technique significantly reduces energy cost and improves nodes' lifetime to function for higher time duration and produce a higher data packet delivery ratio. To the best of the author's knowledge, this is the first work on geocast in SD-WSNs

Mathematical Models and Algorithms for Network Flow Problems Arising in Wireless Sensor Network Applications

We examine multiple variations on two classical network flow problems, the maximum flow and minimum-cost flow problems. These two problems are well-studied within the optimization community, and many models and algorithms have been presented for their solution. Due to the unique characteristics of the problems we consider, existing approaches cannot be directly applied. The problem variations we examine commonly arise in wireless sensor network (WSN) applications. A WSN consists of a set of sensors and collection sinks that gather and analyze environmental conditions. In addition to providing a taxonomy of relevant literature, we present mathematical programming models and algorithms for solving such problems. First, we consider a variation of the maximum flow problem having node-capacity restrictions. As an alternative to solving a single linear programming (LP) model, we present two alternative solution techniques. The first iteratively solves two smaller auxiliary LP models, and the second is a heuristic approach that avoids solving any LP. We also examine a variation of the maximum flow problem having semicontinuous restrictions that requires the flow, if positive, on any path to be greater than or equal to a minimum threshold. To avoid solving a mixed-integer programming (MIP) model, we present a branch-and-price algorithm that significantly improves the computational time required to solve the problem. Finally, we study two dynamic network flow problems that arise in wireless sensor networks under non-simultaneous flow assumptions. We first consider a dynamic maximum flow problem that requires an arc to transmit a minimum amount of flow each time it begins transmission. We present an MIP for solving this problem along with a heuristic algorithm for its solution. Additionally, we study a dynamic minimum-cost flow problem, in which an additional cost is incurred each time an arc begins transmission. In addition to an MIP, we present an exact algorithm that iteratively solves a relaxed version of the MIP until an optimal solution is found

Smart Wireless Sensor Networks

The recent development of communication and sensor technology results in the growth of a new attractive and challenging area - wireless sensor networks (WSNs). A wireless sensor network which consists of a large number of sensor nodes is deployed in environmental fields to serve various applications. Facilitated with the ability of wireless communication and intelligent computation, these nodes become smart sensors which do not only perceive ambient physical parameters but also be able to process information, cooperate with each other and self-organize into the network. These new features assist the sensor nodes as well as the network to operate more efficiently in terms of both data acquisition and energy consumption. Special purposes of the applications require design and operation of WSNs different from conventional networks such as the internet. The network design must take into account of the objectives of specific applications. The nature of deployed environment must be considered. The limited of sensor nodes� resources such as memory, computational ability, communication bandwidth and energy source are the challenges in network design. A smart wireless sensor network must be able to deal with these constraints as well as to guarantee the connectivity, coverage, reliability and security of network's operation for a maximized lifetime. This book discusses various aspects of designing such smart wireless sensor networks. Main topics includes: design methodologies, network protocols and algorithms, quality of service management, coverage optimization, time synchronization and security techniques for sensor networks

System Integration of Flexible and Multifunctional Thin Film Sensors for Structural Health Monitoring

Greater information is needed on the state of civil infrastructure to ensure public safety and cost-efficient management. Lack of infrastructure investment and foreseeable funding challenges mandate a more intelligent approach to future maintenance of infrastructure systems. Much of the technology currently utilized to assess structural performance is based on discrete sensors. While such sensors can provide valuable data, they can lack sufficient resolution to accurately identify damage through inverse methods. Alternatively, technologies have shown promise for distributed, direct damage detection with flexible thin film and multifunctional polymer-nanocomposite materials. However, challenges remain as significant past work has focused on material optimization as opposed to sensing systems for damage detection. This dissertation offers novel methods for direct and distributed strain sensing by providing a fabrication methodology for broadly enabling thin film sensing technologies in structural health monitoring (SHM) applications. This fabrication methodology is presented initially as a set of materials and processes which are illustrated in analog circuit primitive forms including flexible, thin film capacitors, resistors, and inductors. Three sensing systems addressing specific SHM challenges are developed from this base of components and processes as specific illustrations of the broader fabrication approach. The first system developed is a fully integrated strain sensing system designed to enable the use of multifunctional materials in sensing applications. This is achieved through the development of an optimized fabrication approach applicable to many multifunctional materials. A layer-by-layer (LbL) deposited nanocomposite is incorporated with a lithography process to produce a sensing system. To illustrate the process, a strain sensing platform consisting of a nanocomposite film within an amplified Wheatstone bridge circuit is presented. The study reveals the material process is highly repeatable to produce fully integrated strain sensors with high linearity and sensitivity. The thin film strain sensors are robust and are capable of high strain measurements beyond 3,000 μϵ. The second system developed is an array of resistive distributed strain sensors and an associated algorithm to provide an alternative to electrical impedance tomography for spatial strain sensing. An LbL deposited polymer composite thin film is utilized as the piezoresistive sensing material. An inverse algorithm is presented and utilized for determining the resistance of array elements by electrically stimulating boundary nodes. Two polymer nanocomposite arrays are strain tested under cyclic loading. Both arrays functioned as networks of strain sensors confirming the viability of the approach and computational benefits for SHM. The third system developed is a thin film wireless threshold strain sensor for measuring strain in implanted and embedded applications. The wireless sensing system is comprised of two thin film, inductor-capacitor circuits, one of which included a fuse element. The sensor is fabricated on polyimide with metal layers used to pattern inductive antennas and a strain sensitive parallel plate capacitor. A titanium thin film fuse is designed to fail, or have a large resistance increase, when a strain threshold is exceeded. Three prototype systems are interrogated wirelessly while under increasing tensile strain. One of two sensor resonant peaks disappear at a strain threshold as designed, validating the sensing approach and thin film form for use in SHM systems. The fuse approach provides a platform for various systems and sensing elements. The reference peak remains intact and is used for continuous real-time strain sensing with a sensitivity of 0.5 and a noise floor below 50 microstrain.PHDCivil EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/144183/1/arburt_1.pd