Design Space Exploration of SABER in 65nm ASIC

This paper presents a design space exploration for SABER, one of the finalists in NIST’s quantum-resistant public-key cryptographic standardization effort. Our design space exploration targets a 65nmASIC platform and has resulted in the evaluation of 6 different architectures. Our exploration is initiated by setting a baseline architecture which is ported from FPGA. In order to improve the clock frequency (the primary goal in our exploration), we have employed several optimizations: (i) use of compiled memories in a ‘smart synthesis’ fashion, (ii) pipelining, and (iii) logic sharing between SABER building blocks. The most optimized architecture utilizes four register files, achieves a remarkable clock frequency of 1𝐺𝐻𝑧 while only requiring an area of 0.314𝑚𝑚2. Moreover, physical synthesis is carried out for this architecture and a tapeout-ready layout is presented. The estimated dynamic power consumption of the high-frequency architecture is approximately 184mW for key generation and 187mW for encapsulation or decapsulation operations. These results strongly suggest that our optimized accelerator architecture is well suited for high-speed cryptographic applications

A 334µW 0.158mm2 ASIC for Post-Quantum Key-Encapsulation Mechanism Saber with Low-latency Striding Toom-Cook Multiplication Extended Version

The hard mathematical problems that assure the security of our current public-key cryptography (RSA, ECC) are broken if and when a quantum computer appears rendering them ineffective for use in the quantum era. Lattice based cryptography is a novel approach to public key cryptography, of which the mathematical investigation (so far) resists attacks from quantum computers. By choosing a module learning with errors (MLWE) algorithm as the next standard, National Institute of Standard \& Technology (NIST) follows this approach. The multiplication of polynomials is the central bottleneck in the computation of lattice based cryptography. Because public key cryptography is mostly used to establish common secret keys, focus is on compact area, power and energy budget and to a lesser extent on throughput or latency. While most other work focuses on optimizing number theoretic transform (NTT) based multiplications, in this paper we highly optimize a Toom-Cook based multiplier. We demonstrate that a memory-efficient striding Toom-Cook with lazy interpolation, results in a highly compact, low power implementation, which on top enables a very regular memory access scheme. To demonstrate the efficiency, we integrate this multiplier into a Saber post-quantum accelerator, one of the four NIST finalists. Algorithmic innovation to reduce active memory, timely clock gating and shift-add multiplier has helped to achieve 38\% less power than state-of-the art PQC core, 4 $\times$ less memory, 36.8\% reduction in multiplier energy and 118$\times$ reduction in active power with respect to state-of-the-art Saber accelerator (not silicon verified). This accelerator consumes $0.158mm^2$ active area which is lowest reported till date despite process disadvantages of the state-of-the-art designs

Towards High-speed ASIC Implementations of Post-Quantum Cryptography

In this brief, we realize different architectural techniques towards improving the performance of post-quantum cryptography (PQC) algorithms when implemented as hardware accelerators on an application-specific integrated circuit (ASIC) platform. Having SABER as a case study, we designed a 256-bit wide architecture geared for high-speed cryptographic applications that incorporates smaller and distributed SRAM memory blocks. Moreover, we have adapted the building blocks of SABER to process 256-bit words. We have also used a buffer technique for efficient polynomial coefficient multiplications to reduce the clock cycle count. Finally, double-sponge functions are combined serially (one after another) in a high-speed KECCAK core to improve the hash operations of SHA/SHAKE. For key-generation, encapsulation, and decapsulation operations of SABER, our 256-bit wide accelerator with a single sponge function is 1.71x, 1.45x, and 1.78x faster compared to the raw clock cycle count of a serialized SABER design. Similarly, our 256-bit implementation with double-sponge functions takes 1.08x, 1.07x & 1.06x fewer clock cycles compared to its single-sponge counterpart. The studied optimization techniques are not specific to SABER - they can be utilized for improving the performance of other lattice-based PQC accelerators

Private and Public-Key Side-Channel Threats Against Hardware Accelerated Cryptosystems

Modern side-channel attacks (SCA) have the ability to reveal sensitive data from non-protected hardware implementations of cryptographic accelerators whether they be private or public-key systems. These protocols include but are not limited to symmetric, private-key encryption using AES-128, 192, 256, or public-key cryptosystems using elliptic curve cryptography (ECC). Traditionally, scalar point (SP) operations are compelled to be high-speed at any cost to reduce point multiplication latency. The majority of high-speed architectures of contemporary elliptic curve protocols rely on non-secure SP algorithms. This thesis delivers a novel design, analysis, and successful results from a custom differential power analysis attack on AES-128. The resulting SCA can break any 16-byte master key the sophisticated cipher uses and it\u27s direct applications towards public-key cryptosystems will become clear. Further, the architecture of a SCA resistant scalar point algorithm accompanied by an implementation of an optimized serial multiplier will be constructed. The optimized hardware design of the multiplier is highly modular and can use either NIST approved 233 & 283-bit Kobliz curves utilizing a polynomial basis. The proposed architecture will be implemented on Kintex-7 FPGA to later be integrated with the ARM Cortex-A9 processor on the Zynq-7000 AP SoC (XC7Z045) for seamless data transfer and analysis of the vulnerabilities SCAs can exploit

Efficient software implementation of elliptic curves and bilinear pairings

Orientador: Júlio César Lopez HernándezTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: O advento da criptografia assimétrica ou de chave pública possibilitou a aplicação de criptografia em novos cenários, como assinaturas digitais e comércio eletrônico, tornando-a componente vital para o fornecimento de confidencialidade e autenticação em meios de comunicação. Dentre os métodos mais eficientes de criptografia assimétrica, a criptografia de curvas elípticas destaca-se pelos baixos requisitos de armazenamento para chaves e custo computacional para execução. A descoberta relativamente recente da criptografia baseada em emparelhamentos bilineares sobre curvas elípticas permitiu ainda sua flexibilização e a construção de sistemas criptográficos com propriedades inovadoras, como sistemas baseados em identidades e suas variantes. Porém, o custo computacional de criptossistemas baseados em emparelhamentos ainda permanece significativamente maior do que os assimétricos tradicionais, representando um obstáculo para sua adoção, especialmente em dispositivos com recursos limitados. As contribuições deste trabalho objetivam aprimorar o desempenho de criptossistemas baseados em curvas elípticas e emparelhamentos bilineares e consistem em: (i) implementação eficiente de corpos binários em arquiteturas embutidas de 8 bits (microcontroladores presentes em sensores sem fio); (ii) formulação eficiente de aritmética em corpos binários para conjuntos vetoriais de arquiteturas de 64 bits e famílias mais recentes de processadores desktop dotadas de suporte nativo à multiplicação em corpos binários; (iii) técnicas para implementação serial e paralela de curvas elípticas binárias e emparelhamentos bilineares simétricos e assimétricos definidos sobre corpos primos ou binários. Estas contribuições permitiram obter significativos ganhos de desempenho e, conseqüentemente, uma série de recordes de velocidade para o cálculo de diversos algoritmos criptográficos relevantes em arquiteturas modernas que vão de sistemas embarcados de 8 bits a processadores com 8 coresAbstract: The development of asymmetric or public key cryptography made possible new applications of cryptography such as digital signatures and electronic commerce. Cryptography is now a vital component for providing confidentiality and authentication in communication infra-structures. Elliptic Curve Cryptography is among the most efficient public-key methods because of its low storage and computational requirements. The relatively recent advent of Pairing-Based Cryptography allowed the further construction of flexible and innovative cryptographic solutions like Identity-Based Cryptography and variants. However, the computational cost of pairing-based cryptosystems remains significantly higher than traditional public key cryptosystems and thus an important obstacle for adoption, specially in resource-constrained devices. The main contributions of this work aim to improve the performance of curve-based cryptosystems, consisting of: (i) efficient implementation of binary fields in 8-bit microcontrollers embedded in sensor network nodes; (ii) efficient formulation of binary field arithmetic in terms of vector instructions present in 64-bit architectures, and on the recently-introduced native support for binary field multiplication in the latest Intel microarchitecture families; (iii) techniques for serial and parallel implementation of binary elliptic curves and symmetric and asymmetric pairings defined over prime and binary fields. These contributions produced important performance improvements and, consequently, several speed records for computing relevant cryptographic algorithms in modern computer architectures ranging from embedded 8-bit microcontrollers to 8-core processorsDoutoradoCiência da ComputaçãoDoutor em Ciência da Computaçã

A Review of Techniques for Implementing Elliptic Curve Point Multiplication on Hardware

N/

Energy Efficient Hardware Design for Securing the Internet-of-Things

The Internet of Things (IoT) is a rapidly growing field that holds potential to transform our everyday lives by placing tiny devices and sensors everywhere. The ubiquity and scale of IoT devices require them to be extremely energy efficient. Given the physical exposure to malicious agents, security is a critical challenge within the constrained resources. This dissertation presents energy-efficient hardware designs for IoT security. First, this dissertation presents a lightweight Advanced Encryption Standard (AES) accelerator design. By analyzing the algorithm, a novel method to manipulate two internal steps to eliminate storage registers and replace flip-flops with latches to save area is discovered. The proposed AES accelerator achieves state-of-art area and energy efficiency. Second, the inflexibility and high Non-Recurring Engineering (NRE) costs of Application-Specific-Integrated-Circuits (ASICs) motivate a more flexible solution. This dissertation presents a reconfigurable cryptographic processor, called Recryptor, which achieves performance and energy improvements for a wide range of security algorithms across public key/secret key cryptography and hash functions. The proposed design employs circuit techniques in-memory and near-memory computing and is more resilient to power analysis attack. In addition, a simulator for in-memory computation is proposed. It is of high cost to design and evaluate new-architecture like in-memory computing in Register-transfer level (RTL). A C-based simulator is designed to enable fast design space exploration and large workload simulations. Elliptic curve arithmetic and Galois counter mode are evaluated in this work. Lastly, an error resilient register circuit, called iRazor, is designed to tolerate unpredictable variations in manufacturing process operating temperature and voltage of VLSI systems. When integrated into an ARM processor, this adaptive approach outperforms competing industrial techniques such as frequency binning and canary circuits in performance and energy.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147546/1/zhyiqun_1.pd

Customisable arithmetic hardware designs

Imperial Users onl

Cryptographic key distribution in wireless sensor networks: a hardware perspective

In this work the suitability of different methods of symmetric key distribution for application in wireless sensor networks are discussed. Each method is considered in terms of its security implications for the network. It is concluded that an asymmetric scheme is the optimum choice for key distribution. In particular, Identity-Based Cryptography (IBC) is proposed as the most suitable of the various asymmetric approaches. A protocol for key distribution using identity based Non-Interactive Key Distribution Scheme (NIKDS) and Identity-Based Signature (IBS) scheme is presented. The protocol is analysed on the ARM920T processor and measurements were taken for the run time and energy of its components parts. It was found that the Tate pairing component of the NIKDS consumes significants amounts of energy, and so it should be ported to hardware. An accelerator was implemented in 65nm Complementary Metal Oxide Silicon (CMOS) technology and area, timing and energy figures have been obtained for the design. Initial results indicate that a hardware implementation of IBC would meet the strict energy constraint of a wireless sensor network node

Multi-point Security by a Multiplatform-compatible Multifunctional Authentication and Encryption Board

Securing the access in networks is a first-order concern that only gains importance with the advent of Internet of Things (IoT). In this paper, a security system is presented for password-free access over the secured link. It makes the connection faster than manual authentication and facilitates Machine-to-Machine (M2M) secure interactions, as required for IoT. The authentication procedure includes the exchange of certificate and challenge/response pairs, which are stored and computed in an external security coprocessor. The system enforces the authentication protocol, includes error detection, and handles multiple devices according to their Operating Systems (OS) through their connections/ disconnections. It also performs encryption, if necessary. It is applicable on application level for devices, including IoT based devices, sensors, Android, and iOS-based smartphones. The devices that have the correct certificate and can solve the challenge can connect to the network linked with the security system. The system security is hardened because the sensitive authentication elements such as keys, certificates, and challenge responses are invisible to users and are exchanged only using strong hashing algorithms that are irreversible. The proposed hardware security system can augment any supporting network, converting the entire insecure network into a secured one, as well as retrofit existing insecure Bluetooth devices for secure access. The system incurs low overhead in time and energy by performing security operations in an ASIC coprocessor, and can be shared to secure access to multiple devices, which reduces both energy and cost