The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics

The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future

A multilevel converter with a floating bridge for open-ended winding motor drive application

In this thesis, a dual inverter topology is considered as an alternative to a multilevel converter for the control of high speed machines. Instead of feeding to one end of the stator with a single power converter, this topology feeds from both sides of the stator winding using two converters, thus achieving multilevel output voltage waveforms across the load. A large amount of published work in the area of open end winding power converter topologies are focused on symmetrical voltage sources. This published research recognises the advantages of the converter system in terms of increased reliability, improved power sharing capability and elimination of common mode voltages when compared to traditional single sided three phase converter solutions. However isolated DC supplies come with the price of additional components thus increase size, weight and losses of the converter system. The aim of this project is, therefore, to investigate on reducing size, weight and losses of the open end winding motor drive by eliminating the need for isolated supply as well to achieve multilevel output voltage waveform. A traditional open-end winding induction motor drive has been analysed in terms of weight and losses and it has been clearly identified that the isolation transformer not only increases the size and weight of a drive system but also includes additional losses. A modified dual inverter system has then been proposed where one of the bridge inverters is floating, thus eliminated the need for isolated supplies. An asymmetric DC voltage sources ratio of 2:1 is utilised to achieve multilevel output voltage waveform across the load. The switching sequences are also analysed to identify the charging and discharging sequences to achieve control over floating capacitor voltage. This thesis describes the theoretical derivation of the modified converter model and algorithms as well as experimental results from an 11kW laboratory prototype

Assessment of novel power electronic converters for drives applications

Phd ThesisIn the last twenty years, industrial and academic research has produced over one hundred new converter topologies for drives applications. Regrettably, most of the published work has been directed towards a single topology, giving an overall impression of a large number of unconnected, competing techniques. To provide insight into this wide ranging subject area, an overview of converter topologies is presented. Each topology is classified according to its mode of operation and a family tree is derived encompassing all converter types. Selected converters in each class are analysed, simulated and key operational characteristics identified. Issues associated with the practical implementation of analysed topologies are discussed in detail. Of all AC-AC conversion techniques, it is concluded that softswitching converter topologies offer the most attractive alternative to the standard hard switched converter in the power range up to 100kW because of their high performance to cost ratio. Of the softswitching converters, resonant dc-link topologies are shown to produce the poorest output performance although they offer the cheapest solution. Auxiliary pole commutated inverters, on the other hand, can achieve levels of performance approaching those of the hard switched topology while retaining the benefits of softswitching. It is concluded that the auxiliary commutated resonant pole inverter (ACPI) topology offers the greatest potential for exploitation in spite of its relatively high capital cost. Experimental results are presented for a 20kW hard switched inverter and an equivalent 20kW ACPI. In each case the converter controller is implanted using a digital signal processor. For the ACPI, a new control scheme, which eliminates the need for switch current and voltage sensors, is implemented. Results show that the ACPI produces lower overall losses when compared to its hardswitching counterpart. In addition, device voltage stress, output dv/dt and levels of high frequency output harmonics are all reduced. Finally, it is concluded that modularisation of the active devices, optimisation of semiconductor design and a reduction in the number of additional sensors through the use of novel control methods, such as those presented, will all play a part in the realisation of an economically viable system.Research Committee of the University of Newcastle upon Tyn

Soft switching techniques for multilevel inverters

Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Elétrica

Medium Voltage Generation System with Five-level NPC Converters for Kite Tidal Power

Offshore power generation has emerged as a prominent source of energy and the installed capacity of new plants has been steadily increasing in recent years. Tidal power specifically is a promising renewable energy source which has not been highly exploited yet, despite its distinctive advantages of being predictable and independent of weather conditions. The main objective of this Licentiate thesis is to analyze and propose solutions for two common problems in offshore power production, which are the power variations due to the non-steady speed profile of the water speed flowing through the turbine and the efficient transportation of the produced power to the shore.The tidal power application utilized in this thesis is the subsea kite, which is a recently developed tidal energy conversion technology that can increase the generated power compared to a traditional static tidal turbine. A turbine is mounted on a submerged kite and the kite moves inside the sea following a predefined trajectory and generating electric power from the tidal currents. The speed and torque of the turbine varies periodically due to the periodic movement of the kite in the sea and, therefore, the control of the generator needs to be able to handle this variable generated power. The kite studied in this thesis has rated active power of 500 kW.In the first part of the thesis, the power generation system of the subsea kite is modelled and the profile of the generated power is extracted given a specific tidal current and turbine geometry. The control of the power converters is described and tested for the specific profile of the generated power. The speed of the generator is controlled by a properly designed Maximum Power Point Tracking algorithm, which ensures that the generator extracts the maximum power from the tidal stream. Experimental verification of the model of this innovative system is also conducted on a laboratory 35 kVA emulator of the tidal power generator.The second part of the thesis deals with the design of a medium voltage generator\ua0drive. The use of medium voltage in the power generation system is highly advantageous for the tidal kite application, since it can reduce the current flowing through the undersea cables connecting the tidal plant to the local grid. Therefore, the size of the cables can be reduced. The drive proposed here uses two 5-level Neutral Point Clamped (NPC) converters connected back-to-back. The 5-level NPC converters can operate with high voltage, while using multiple low-voltagerated power switches. Contrarily, the typical 2-Level converters have limited voltage capability, since they would require more expensive high-voltage-rated power switches. The increased operating voltage of the power conversion system results to lower current and losses in the cables. Another advantage of the NPC converter is the low harmonics at the ac side, which reduces the requirements for passive grid filters. However, the voltage balancing of the dc-link capacitors in this converter topology is a challenge which has not been effectively solved in previous studies. Therefore, a novel voltage balancing strategy is proposed here that uses advanced Space-Vector-Modulation techniques and hardware-based voltage balancing schemes with reduced number of components and lower power losses. Finally, a laboratory prototype of the NPC-converter-based power conversion system is developed with rated power 50 kVA. SiC MOSFETs are used on theconverters to further increase the system’s efficiency and voltage capability.This thesis presents the model, control and laboratory emulator of a kite-based tidal power generator. The experimental set-up can be utilized for conducting research on other renewable sources, such as wind power, that have similar performance. Also, the developed multilevel drive is suitable for various applications where medium voltage grid-connected drives are used and particularly in distributed renewable power generation

Power Converters in Power Electronics

In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters