19 research outputs found
Re-thinking Analog Integrated Circuits in Digital Terms: A New Design Concept for the IoT Era
A steady trend towards the design of mostly-digital and digital-friendly analog circuits, suitable to integration in mainstream nanoscale CMOS by a highly automated design flow, has been observed in the last years to address the requirements of the emerging Internet of Things (IoT) applications. In this context, this tutorial brief presents an overview of concepts and design methodologies that emerged in the last decade, aimed to the implementation of analog circuits like Operational Transconductance Amplifiers, Voltage References and Data Converters by digital circuits. The current design challenges and application scenarios as well as the future perspectives and opportunities in the field of digital-based analog processing are finally discussed
High frequency and high dynamic range continuous time filters
Many modern communication systems use orthogonal frequency division
multiplexing (OFDM) and discrete multi-tone (DMT) as modulation schemes where
high data rates are transmitted over a wide frequency band in multiple orthogonal subcarriers.
Due to the many advantages, such as flexibility, good noise immunity and the
ability to be optimized for medium conditions, the use of DMT and OFDM can be found
in digital video broadcasting, local area wireless network (IEEE 802.11a), asymmetric
digital subscriber line (ADSL), very high bit rate DSL (VDSL) and power line
communications (PLC). However, a major challenge is the design of the analog frontend;
for these systems a large dynamic range is required due to the significant peak to
average ratio of the resulting signals. In receivers, very demanding high-performance
analog filters are typically used to block interferers and provide anti-aliasing before the
subsequent analog to digital conversion stage. For frequencies higher than 10MHz, Gm-C filter implementations are generally
preferred due to the more efficient operation of wide-band operational transconductance
amplifiers (OTA). Nevertheless, the inherent low-linearity of open-loop operated OTA
limits the dynamic range. In this dissertation, three different proposed OTA linearity
enhancement techniques for the design of high frequency and high dynamic range are
presented. The techniques are applied to two filter implementations: a 20MHz second
order tunable filter and a 30MHz fifth order elliptical low-pass filter. Simulation and
experimental results show a spurious free dynamic range (SFDR) of 65dB with a power
consumption of 85mW. In a figure of merit where SFDR is normalized to the power
consumption, this filter is 6dB above the trend-line of recently reported continuous time
filters
Self Capacitance based Wireless Power Transfer for Wearable Electronics: Theory and Implementation
Wireless power transfer (WPT
High Performance Power Management Integrated Circuits for Portable Devices
abstract: Portable devices often require multiple power management IC (PMIC) to power different sub-modules, Li-ion batteries are well suited for portable devices because of its small size, high energy density and long life cycle. Since Li-ion battery is the major power source for portable device, fast and high-efficiency battery charging solution has become a major requirement in portable device application.
In the first part of dissertation, a high performance Li-ion switching battery charger is proposed. Cascaded two loop (CTL) control architecture is used for seamless CC-CV transition, time based technique is utilized to minimize controller area and power consumption. Time domain controller is implemented by using voltage controlled oscillator (VCO) and voltage controlled delay line (VCDL). Several efficiency improvement techniques such as segmented power-FET, quasi-zero voltage switching (QZVS) and switching frequency reduction are proposed. The proposed switching battery charger is able to provide maximum 2 A charging current and has an peak efficiency of 93.3%. By configure the charger as boost converter, the charger is able to provide maximum 1.5 A charging current while achieving 96.3% peak efficiency.
The second part of dissertation presents a digital low dropout regulator (DLDO) for system on a chip (SoC) in portable devices application. The proposed DLDO achieve fast transient settling time, lower undershoot/overshoot and higher PSR performance compared to state of the art. By having a good PSR performance, the proposed DLDO is able to power mixed signal load. To achieve a fast load transient response, a load transient detector (LTD) enables boost mode operation of the digital PI controller. The boost mode operation achieves sub microsecond settling time, and reduces the settling time by 50% to 250 ns, undershoot/overshoot by 35% to 250 mV and 17% to 125 mV without compromising the system stability.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201
Linearization of Time-encoded ADCs Architectures for Smart MEMS Sensors in Low Power CMOS Technology
Mención Internacional en el tÃtulo de doctorIn the last few years, the development of mobile technologies and machine learning
applications has increased the demand of MEMS-based digital microphones.
Mobile devices have several microphones enabling noise canceling, acoustic beamforming
and speech recognition. With the development of machine learning applications
the interest to integrate sensors with neural networks has increased.
This has driven the interest to develop digital microphones in nanometer CMOS
nodes where the microphone analog-front end and digital processing, potentially
including neural networks, is integrated on the same chip.
Traditionally, analog-to-digital converters (ADCs) in digital microphones have
been implemented using high order Sigma-Delta modulators. The most common
technique to implement these high order Sigma-Selta modulators is switchedcapacitor
CMOS circuits. Recently, to reduce power consumption and make them
more suitable for tasks that require always-on operation, such as keyword recognition,
switched-capacitor circuits have been improved using inverter-based operational
amplifier integrators. Alternatively, switched-capacitor based Sigma-
Delta modulators have been replaced by continuous time Sigma-Delta converters.
Nevertheless, in both implementations the input signal is voltage encoded
across the modulator, making the integration in smaller CMOS nodes more challenging
due to the reduced voltage supply.
An alternative technique consists on encoding the input signal on time (or
frequency) instead of voltage. This is what time-encoded converters do. Lately,
time-encoding converters have gained popularity as they are more suitable to
nanometer CMOS nodes than Sigma-Delta converters. Among the ones that have
drawn more interest we find voltage-controlled oscillator based ADCs (VCOADCs).
VCO-ADCs can be implemented using CMOS inverter based ring oscillators
(RO) and digital circuitry. They also show noise-shaping properties.
This makes them a very interesting alternative for implementation of ADCs in
nanometer CMOS nodes. Nevertheless, two main circuit impairments are present
in VCO-ADCs, and both come from the oscillator non-idealities. The first of them
is the oscillator phase noise, that reduces the resolution of the ADC. The second
is the non-linear tuning curve of the oscillator, that results in harmonic distortion
at medium to high input amplitudes.
In this thesis we analyze the use of time encoding ADCs for MEMS microphones
with special focus on ring oscillator based ADCs (RO-ADCs). Firstly, we
study the use of a dual-slope based SAR noise shaped quantizer (SAR-NSQ) in
sigma-delta loops. This quantizer adds and extra level of noise-shaping to the modulator, improving the resolution. The quantizer is explained, and equations
for the noise transfer function (NTF) of a third order sigma-delta using a second
order filter and the NSQ are presented.
Secondly, we move our attention to the topic of RO-ADCs. We present a high
dynamic range MEMS microphone 130nm CMOS chip based on an open-loop
VCO-ADC. This dissertation shows the implementation of the analog front-end
that includes the oscillator and the MEMS interface, with a focus on achieving
low power consumption with low noise and a high dynamic range. The digital
circuitry is left to be explained by the coauthor of the chip in his dissertation. The
chip achieves a 80dBA peak SNDR and 108dB dynamic range with a THD of 1.5%
at 128 dBSPL with a power consumption of 438μW.
After that, we analyze the use of a frequency-dependent-resistor (FDR) to implement
an unsampled feedback loop around the oscillator. The objective is to reduce
distortion. Additionally phase noise mitigation is achieved. A first topology
including an operational amplifier to increase the loop gain is analyzed. The design
is silicon proven in a 130 nm CMOS chip that achieves a 84 dBA peak SNDR
with an analog power consumption of 600μW. A second topology without the
operational amplifier is also analyzed. Two chips are designed with this topology.
The first chip in 130 nm CMOS is a full VCO-ADC including the frequencyto-
digital converter (F2D). This chip achieves a peak SNDR of 76.6 dBA with a
power consumption of 482μW. The second chip includes only the oscillator and
is implemented in 55nm CMOS. The peak SNDR is 78.15 dBA and the analog
power consumption is 153μW.
To finish this thesis, two circuits that use an FDR with a ring oscillator are
presented. The first is a capacity-to-digital converter (CDC). The second is a filter
made with an FDR and an oscillator intended for voice activity detection tasks
(VAD).En los últimos años, el desarrollo de las tecnologÃas móviles y las aplicaciones de
machine-learning han aumentado la demanda de micrófonos digitales basados
en MEMS. Los dipositivos móviles tienen varios micrófonos que permiten la cancelación
de ruido, el beamforming o conformación de haces y el reconocimiento
de voz. Con el desarrollo de aplicaciones de aprendizaje automático, el interés
por integrar sensores con redes neuronales ha aumentado. Esto ha impulsado el
interés por desarrollar micrófonos digitales en nodos CMOS nanométricos donde
el front-end analógico y el procesamiento digital del micrófono, que puede
incluir redes neuronales, está integrado en el mismo chip.
Tradicionalmente, los convertidores analógicos-digitales (ADC) en micrófonos
digitales han sido implementados utilizando moduladores Sigma-Delta de
orden elevado. La técnica más común para implementar estos moduladores Sigma-
Delta es el uso de circuitos CMOS de capacidades conmutadas. Recientemente,
para reducir el consumo de potencia y hacerlos más adecuados para las tareas que
requieren una operación continua, como el reconocimiento de palabras clave, los
convertidores Sigma-Delta de capacidades conmutadas has sido mejorados con
el uso de integradores implementados con amplificadores operacionales basados
en inversores CMOS. Alternativamente, los Sigma-Delta de capacidades conmutadas
han sido reemplazados por moduladores en tiempo continuo. No obstante,
en ambas implementaciones, la señal de entrada es codificada en voltaje durante
el proceso de conversión, lo que hace que la integración en nodos CMOS más
pequeños sea complicada debido a la menor tensión de alimentación.
Una técnica alternativa consiste en codificar la señal de entrada en tiempo (o
frecuencia) en lugar de tensión. Esto es lo que hacen los convertidores de codificación
temporal. Recientemente, los convertidores de codificación temporal
han ganado popularidad ya que son más adecuados para nodos CMOS nanométricos
que los convertidores Sigma-Delta. Entre los que más interés han despertado
encontramos los ADCs basados en osciladores controlados por tensión
(VCO-ADC). Los VCO-ADC se pueden implementar usando osciladores en anillo
(RO) implementados con inversores CMOS y circuitos digitales. Esta familia
de convertidores también tiene conformado de ruido. Esto los convierte en una
alternativa muy interesante para la implementación de convertidores en nodos
CMOS nanométricos. Sin embargo, dos problemas principales están presentes en
este tipo de ADCs debidos ambos a las no idealidades del oscilador. El primero
de los problemas es la presencia de ruido de fase en el oscilador, lo que reduce la resolución del ADC. El segundo es la curva de conversion voltaje-frecuencia no
lineal del oscilador, lo que causa distorsión a amplitudes medias y altas.
En esta tesis analizamos el uso de ADCs de codificación temporal para micrófonos
MEMS, con especial interés en ADCS basados en osciladores de anillo
(RO-ADC). En primer lugar, estudiamos el uso de un cuantificador SAR con conformado
de ruido (SAR-NSQ) en moduladores Sigma-Delta. Este cuantificador
agrega un orden adicional de conformado de ruido al modulador, mejorando la
resolución. En este documento se explica el cuantificador y obtienen las ecuaciones
para la función de transferencia de ruido (NTF) de un sigma-delta de tercer
orden usando un filtro de segundo orden y el NSQ.
En segundo lugar, dirigimos nuestra atención al tema de los RO-ADC. Presentamos
el chip de un micrófono MEMS de alto rango dinámico en CMOS de
130 nm basado en un VCO-ADC de bucle abierto. En esta tesis se explica la implementación
del front-end analógico que incluye el oscilador y la interfaz con
el MEMS. Esta implementación se ha llevado a cabo con el objetivo de lograr un
bajo consumo de potencia, un bajo nivel de ruido y un alto rango dinámico. La
descripción del back-end digital se deja para la tesis del couator del chip. La
SNDR de pico del chip es de 80dBA y el rango dinámico de 108dB con una THD
de 1,5% a 128 dBSPL y un consumo de potencia de 438μW.
Finalmente, se analiza el uso de una resistencia dependiente de frecuencia
(FDR) para implementar un bucle de realimentación no muestreado alrededor
del oscilador. El objetivo es reducir la distorsión. Además, también se logra la
mitigación del ruido de fase del oscilador. Se analyza una primera topologia de
realimentación incluyendo un amplificador operacional para incrementar la ganancia
de bucle. Este diseño se prueba en silicio en un chip CMOS de 130nm que
logra un pico de SNDR de 84 dBA con un consumo de potencia de 600μW en la
parte analógica. Seguidamente, se analiza una segunda topologÃa sin el amplificador
operacional. Se fabrican y miden dos chips diseñados con esta topologia.
El primero de ellos en CMOS de 130 nm es un VCO-ADC completo que incluye
el convertidor de frecuencia a digital (F2D). Este chip alcanza un pico SNDR de
76,6 dBA con un consumo de potencia de 482μW. El segundo incluye solo el oscilador
y está implementado en CMOS de 55nm. El pico SNDR es 78.15 dBA y el
el consumo de potencia analógica es de 153μW.
Para cerrar esta tesis, se presentan dos circuitos que usan la FDR con un oscilador
en anillo. El primero es un convertidor de capacidad a digital (CDC). El
segundo es un filtro realizado con una FDR y un oscilador, enfocado a tareas de
detección de voz (VAD).Programa de Doctorado en IngenierÃa Eléctrica, Electrónica y Automática por la Universidad Carlos III de MadridPresidente: Antonio Jesús Torralba Silgado.- Secretaria: MarÃa Luisa López Vallejo.- Vocal: Pieter Rombout
Speech filtering for improving intelligibility in noisy transients
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.Cataloged from PDF version of thesis.Includes bibliographical references.Hearing impairment is a problem that affects a large percentage of the population. Cochlear implants allow those with profound or total hearing loss to regain some hearing by stimulating auditory nerve fibers with implanted electrodes, in response to sound picked up by an external microphone. The signal processing chain from microphone input to stimulation output is an important factor in the overall speech intelligibility of the implant system. This thesis work improves on an existing ultra-low-power cochlear implant system by utilizing an improved noise and power efficient bandpass filter bank to implement a novel frequency-selective gain control algorithm capable of reducing, and in some cases removing, loud transient noises, thereby improving speech intelligibility. This gain control algorithm takes advantage of the inherent frequency-specific gain control afforded by the improved bandpass filter topology. This contribution makes an improvement to the existing state-of-the-art system in both power efficiency and performance.by Andrew Lewine.M.Eng
Digital-based analog processing in nanoscale CMOS ICs for IoT applications
The Internet-of-Things (IoT) concept has been opening up a variety of applications, such as urban and environmental monitoring, smart health, surveillance, and home automation. Most of these IoT applications require more and more power/area efficient Complemen tary Metal–Oxide–Semiconductor (CMOS) systems and faster prototypes (lower time-to market), demanding special modifications in the current IoT design system bottleneck: the analog/RF interfaces. Specially after the 2000s, it is evident that there have been significant improvements in CMOS digital circuits when compared to analog building blocks. Digital circuits have been taking advantage of CMOS technology scaling in terms of speed, power consump tion, and cost, while the techniques running behind the analog signal processing are still lagging. To decrease this historical gap, there has been an increasing trend in finding alternative IC design strategies to implement typical analog functions exploiting Digital in-Concept Design Methodologies (DCDM). This idea of re-thinking analog functions in digital terms has shown that Analog ICs blocks can also avail of the feature-size shrinking and energy efficiency of new technologies. This thesis deals with the development of DCDM, demonstrating its compatibility for Ultra-Low-Voltage (ULV) and Power (ULP) IoT applications. This work proves this state ment through the proposing of new digital-based analog blocks, such as an Operational Transconductance Amplifiers (OTAs) and an ac-coupled Bio-signal Amplifier (BioAmp). As an initial contribution, for the first time, a silicon demonstration of an embryonic Digital-Based OTA (DB-OTA) published in 2013 is exhibited. The fabricated DB-OTA test chip occupies a compact area of 1,426 µm2 , operating at supply voltages (VDD) down to 300 mV, consuming only 590 pW while driving a capacitive load of 80pF. With a Total Harmonic Distortion (THD) lower than 5% for a 100mV input signal swing, its measured small-signal figure of merit (FOMS) and large-signal figure of merit (FOML) are 2,101 V −1 and 1,070, respectively. To the best of this thesis author’s knowledge, this measured power is the lowest reported to date in OTA literature, and its figures of merit are the best in sub-500mV OTAs reported to date. As the second step, mainly due to the robustness limitation of previous DB-OTA, a novel calibration-free digital-based topology is proposed, named here as Digital OTA (DIG OTA). A 180-nm DIGOTA test chip is also developed exhibiting an area below the 1000 µm2 wall, 2.4nW power under 150pF load, and a minimum VDD of 0.25 V. The proposed DIGOTA is more digital-like compared with DB-OTA since no pseudo-resistor is needed. As the last contribution, the previously proposed DIGOTA is then used as a building block to demonstrate the operation principle of power-efficient ULV and ultra-low area (ULA) fully-differential, digital-based Operational Transconductance Amplifier (OTA), suitable for microscale biosensing applications (BioDIGOTA) such as extreme low area Body Dust. Measured results in 180nm CMOS confirm that the proposed BioDIGOTA can work with a supply voltage down to 400 mV, consuming only 95 nW. The BioDIGOTA layout occupies only 0.022 mm2 of total silicon area, lowering the area by 3.22X times compared to the current state of the art while keeping reasonable system performance, such as 7.6 Noise Efficiency Factor (NEF) with 1.25 µVRMS input-referred noise over a 10 Hz bandwidth, 1.8% of THD, 62 dB of the common-mode rejection ratio (CMRR) and 55 dB of power supply rejection ratio (PSRR). After reviewing the current DCDM trend and all proposed silicon demonstrations, the thesis concludes that, despite the current analog design strategies involved during the analog block development
Digital-Based Analog Processing in Nanoscale CMOS ICs for IoT Applications
L'abstract è presente nell'allegato / the abstract is in the attachmen