Comparative efficiency and power assessment of optical photoconductive material-based terahertz sources for wireless communication systems

Electronic version of an article published as [Journal of Circuits, Systems and Computers, vol. 28, num. 1, 2018] [https://doi.org/10.1142/S0218126619500051] © [copyright World Scientific Publishing Company] [https://www.worldscientific.com/worldscinet/jcsc]Terahertz band has recently attracted the attention of the communication society due to its huge bandwidth and very high-speed wireless communications capability. It has been utilized in a variety of disciplines including physics, biology and astronomy for years; and the main concerns have always been obtaining highly efficient and high-power terahertz sources. Today, these problems are still the most important issues in establishing an operable wireless terahertz communication link. In this paper, recent studies in the field of terahertz source design are investigated based on the terahertz output power and efficiency. Solid-state sources and optical sources were comparatively reviewed with optical photoconductive material (OPM)-based methods which are combined with the terahertz antennas in the design phase generally. For wireless communication, the most suitable frequencies are between 0.3THz and 1THz due to the attenuation profile of the atmosphere. For this reason, based on the recently published studies, it has been observed that OPM and resonant tunneling diode-based sources are the most promising terahertz sources in terms of efficiency and power. Key issues and the main problems of terahertz photoconductive antennas which are the base of OPM method were also discussed in this paper.Peer ReviewedPostprint (author's final draft

0.42 THz Transmitter with Dielectric Resonator Array Antenna

Off chip antennas do not occupy the expensive die area, as there is no limitation on their building material, and can be built in any size and shape to match the system requirements, which are all in contrast to on-chip antenna solutions. However, integration of off-chip antennas with Monolithic-Microwave-Integrated Chips (MMIC) and designing a low loss signal transmission from the signal source inside the MMIC to the antenna module is a major challenge and trade off. High resistivity silicon (HRS), is a low cost and extremely low loss material at sub-THz. It has become a prevailing material in fabrication of passive components for THz applications. This work makes use of HRS to build an off-chip Dielectric Resonator Antenna Array Module (DRAAM) to realize a highly efficient transmitter at 420 GHz. This work proposes novel techniques and solutions for design and integration of DRRAM with MMIC as the signal source. A proposed scalable 4×4 antenna structure aligns DRRAM on top of MMIC within 2 μm accuracy through an effortless assembly procedure. DRAAM shows 15.8 dB broadside gain and 0.85 efficiency. DRAs in the DRAAM are differentially excited through aperture coupling. Differential excitation not only inherently provides a mechanism to deliver more power to the antenna, it also removes the additional loss of extra balluns when outputs are differential inside MMIC. In addition, this work proposes a technique to double the radiation power from each DRA. Same radiating mode at 0.42 THz inside every DRA is excited through two separate differential sources. This approach provides an almost loss-less power combining mechanism inside DRA. Two 140_GHz oscillators followed by triplers drive each DRA in the demonstrated 4×4 antenna array. Each oscillator generates 7.2 dBm output power at 140 GHz with -83 dBc/Hz phase noise at 100 KHz and consumes 25 mW of power. An oscillator is followed by a tripler that generates -8 dBm output power at 420 GHz. Oscillator and tripler circuits use a smart layer stack up arrangement for their passive elements where the top metal layer of the die is grounded to comply with the planned integration arrangement. This work shows a novel circuit topology for exciting the antenna element which creates the feed element part of the tuned load for the tripler circuit, therefore eliminates the loss of the transition component, and maximizes the output power delivered to the antenna. The final structure is composed of 32 injection locked oscillators and drives a 4×4 DRAAM achieves 22.8 dBm EIRP

Millimeter-Wave Active Array Antennas Integrating Power Amplifier MMICs through Contactless Interconnects

Next-generation mobile wireless technologies demand higher data capacity than the modern sub-6 GHz technologies can provide. With abundantly available bandwidth, millimeter waves (e.g., Ka/K bands) can offer data rates of around 10 Gbit/s; however, this shift to higher frequency bands also leads to at least 20 dB more free-space path loss. Active integrated antennas have drawn much attention to compensate for this increased power loss with high-power, energy- efficient, highly integrated array transmitters. Traditionally, amplifiers and antennas are designed separately and interconnected with 50 Ohm intermediate impedance matching networks. The design process typically de-emphasizes the correlation between antenna mutual coupling effects and amplifier nonlinearity, rendering high power consumption and poor linearity. This research aims to overcome the technical challenges of millimeter-wave active integrated array antennas on delivering high power (15–25 dBm) and high energy efficiency (≥25%) with above 10% bandwidth. A co-design methodology was proposed to maximize the output power, power efficiency, bandwidth, and linearity with defined optimal interface impedances. Contrary to conventional approaches, this methodology accounts for the correlation between mutual coupling effects and nonlinearity. A metallic cavity-backed bowtie slot antenna, with sufficient degrees of freedom in synthesizing a non 50 Ohm complex-valued optimal impedance, was adopted for high radiation efficiency and enhanced bandwidth. To overcome interconnection’s bandwidth and power loss limitations, an on-chip E-plane probe contactless transition be- tween the antenna and amplifier was proposed. An array of such antennas be- comes connected bowtie slots, allowing for wideband and wide-scan array performance. An infinite array active integrated unit cell approach was introduced for large-scale (aperture area ≈100 λ2) active array designs. The proposed co-design flow is applied in designing a Ka-band wideband, wide scan angle (\ub155\ub0/\ub140\ub0) active array antenna, consisting of the connected bowtie slot radiator fed through the on-chip probe integrated onto the output of a class AB GaAs pHEMT MMIC PA. The infinite array performance of such elements is experimentally verified, presenting a 11.3% bandwidth with a peak 40% power efficiency, 28 dBm EIRP, and 22 dBm saturated power

Capacity Gains in MIMO Systems with Few-Bit ADCs Using Nonlinear Analog Operators

Analog to Digital Converters (ADCs) are a major contributor to the power consumption of multiple-input multiple-output (MIMO) receivers with large antenna arrays operating in the millimeter wave and terahertz carrier frequencies. This is especially the case in large bandwidth terahertz communication systems, due to the sudden drop in energy-efficiency of ADCs as the sampling rate is increased above 100MHz. Two mitigating energy-efficient approaches which have received significant recent interest are i) to reduce the number of ADCs via analog and hybrid beamforming architectures, and ii) to reduce the resolution of the ADCs which in turn decreases power consumption. However, decreasing the number and resolution of ADCs leads to performance loss -- in terms of achievable rates -- due to increased quantization error. In this work, we study the application of practically implementable nonlinear analog operators such as envelop detectors and polynomial operators, prior to sampling and quantization at the ADCs, as a way to mitigate the aforementioned rate-loss. A receiver architecture consisting of linear analog combiners, nonlinear analog operators, and few-bit ADCs is designed. The fundamental information theoretic performance limits of the resulting communication system, in terms of achievable rates, are investigated under various assumptions on the set of implementable analog operators. Various numerical evaluations and simulations of the communication system are provided to compare the set of achievable rates under different architecture designs and parameters. Circuit simulations {in a 65 nm CMOS technology} exhibiting the generation of envelope detectors and polynomial operators are provided, and their power consumption is compared.Comment: arXiv admin note: substantial text overlap with arXiv:2208.0445

Proximal-Field Radiation Sensors for Dynamically Controllable and Self-Correcting Integrated Radiators

One of the major challenges in the design of integrated radiators at mm-wave frequencies is the generation of surface waves in the dielectric substrate by the on-chip antennas. Since dielectric substrates are excellent surface waveguides with a fundamental mode with no cutoff frequency, there is always some energy trapped in them due to the surface waves and the excited substrate modes. This phenomenon is a significant cause of reduced radiation efficiency for mm-wave integrated radiators. However, in this thesis, we use this as an opportunity. We show that the excited substrate modes in the dielectric substrate of an integrated antenna contain valuable information regarding its far-field radiation properties. We introduce Proximal-Field Radiation Sensors (PFRS) as a number of small sensing antennas that are placed strategically on the same substrate as the integrated antenna and measure electromagnetic waves in its immediate proximity. These sensors extract the existing information in the substrate modes and use it to predict the far-field radiation properties of the integrated antenna in real-time based on in-situ measurements in the close proximity of the antennas, without any need to use additional test equipment and without removing the antenna from its operating environment or interfering with its operation in a wireless system. In other words, PFRS enables self-calibration, self-correction, and self-monitoring of the performance of the integrated antennas. Design intuition and a variety of data processing schemes for these sensors are discussed. Two proof-of-concept prototypes are fabricated on printed circuit board (PCB) and integrated circuit (IC) and both verify PFRS capabilities in prediction of radiation properties solely based on in-situ measurements. Dynamically controllable integrated radiators would significantly benefit from PFRS, These radiators are capable of controlling their radiation parameters such as polarization and beam steering angle through their actuators and control units. In these cases, PFRS serves as a tool for real-time monitoring of their radiation parameters, so that without direct measurement of the far-field properties through bulky equipment the required information for the control units and the actuators are provided. Dynamically controllable integrated radiators can be designed using the additional design space provided by Multi-Port Driven (MPD) radiator methodology. After a review of advantages of MPD design over the traditional single-port design, we show that a slot-based MPD radiator would have the additional advantage of reduced exclusive use area compared to the original wire-based MPD radiator, through demonstration of a 134.5-GHz integrated slot-based MPD radiator with a measured single-element EIRP of +6.0 dBm and a total radiated power of -1.3 dBm. We discuss how MPD methodology enables the new concept of Dynamic Polarization Control, as a method to ensure polarization matching of the transmitter antenna to the receiver antenna, regardless of the polarization and orientation of the receiver antenna in space. A DPC antenna design using the MPD methodology is described and a 105.5-GHz 2x1 integrated DPC radiator array with a maximum EIRP of +7.8 dBm and a total radiated power of 0.9 mW is presented as the first demonstration of an integrated radiator with DPC capability. This prototype can control the polarization angle across the entire tuning range of 0 to 180 degrees while maintaining axial ratios above 10 dB, and control the axial ratio from 2.4 dB (near circular) to 14 dB (linear). We also demonstrate how simultaneous two-dimensional beam steering and DPC capabilities can even match the polarization to a mobile receiver antenna through a prototype 123-GHz 2x2 integrated DPC radiator array with a maximum EIRP of +12.3 dBm, polarization angle control across the full range of 0to 180 degrees as well as tunable axial ratio down to 1.2 dB and beam steering of up to 15 degrees in both dimensions. We also use slot-based DPC antennas to fabricate a 120-GHz integrated slot-based DPC radiator array, expected to have a maximum EIRP of +15.5 dBm. We also introduce a new modulation scheme called Polarization Modulation (Pol-M) as a result of DPC capability, where the polarization itself is used for encoding the data. Pol-M is a spatial modulation method and is orthogonal to the existing phase and amplitude modulation schemes. Thus, it could be added on top of those schemes to enable creation of 4-D data constellations, or it can be used as the only basis for modulation to increase the stream security by misleading the undesired receivers. We discuss how DPC antenna enables Pol-M and also present PCB prototypes for Pol-M transmitter and receiver units operating at 2.4 GHz.</p

Micro/Nano Structures and Systems

Micro/Nano Structures and Systems: Analysis, Design, Manufacturing, and Reliability is a comprehensive guide that explores the various aspects of micro- and nanostructures and systems. From analysis and design to manufacturing and reliability, this reprint provides a thorough understanding of the latest methods and techniques used in the field. With an emphasis on modern computational and analytical methods and their integration with experimental techniques, this reprint is an invaluable resource for researchers and engineers working in the field of micro- and nanosystems, including micromachines, additive manufacturing at the microscale, micro/nano-electromechanical systems, and more. Written by leading experts in the field, this reprint offers a complete understanding of the physical and mechanical behavior of micro- and nanostructures, making it an essential reference for professionals in this field

Optoelectronics – Devices and Applications

Optoelectronics - Devices and Applications is the second part of an edited anthology on the multifaced areas of optoelectronics by a selected group of authors including promising novices to experts in the field. Photonics and optoelectronics are making an impact multiple times as the semiconductor revolution made on the quality of our life. In telecommunication, entertainment devices, computational techniques, clean energy harvesting, medical instrumentation, materials and device characterization and scores of other areas of R&D the science of optics and electronics get coupled by fine technology advances to make incredibly large strides. The technology of light has advanced to a stage where disciplines sans boundaries are finding it indispensable. New design concepts are fast emerging and being tested and applications developed in an unimaginable pace and speed. The wide spectrum of topics related to optoelectronics and photonics presented here is sure to make this collection of essays extremely useful to students and other stake holders in the field such as researchers and device designers