Wireless Corrosion Monitoring for Reinforced Concrete Structures and Concrete Repair

Substantial efforts are put in preservation projects, but often little care is given once the project is finished. How do we know when we need to go back and repair the building again? A long-term monitoring system can provide invaluable information about the conditions of a building and building materials. Such information may help owners, architects, engineers and conservators to understand what the cause of the problem is, when and where the repair is needed, and what type of intervention is necessary. This can help prevent small problems from becoming large problems. This thesis will evaluate wireless monitoring systems for reinforced concrete structures. Using wireless sensors as monitoring devices is not a new technique. In fact, there are already several wireless sensors being used to monitor various types of structures, materials and conditions. However, most of the existing wireless sensors have short service lives due to limited battery capacity and issues with durability. This thesis research focuses on prototyping and evaluating a wireless and battery-less sensing device named Intelligent Aggregate (IA) and Intelligent Aggregate System (IAS). Intelligent Aggregate is based on the technology of passive RFID (Radio Frequency Identification) tags, which can wirelessly communicate with RFID readers through Ultra High Frequency (UHF) electromagnetic waves emitted from the readers. There are several advantages of using RFID devices over existing battery powered wireless sensors, which are bulky in size due to batteries and expensive to maintain due to the need to retrieve the sensors for occasional battery change. On the other hand, IA can operate as long as they can harvest energy from the RFID reader. Another advantage of using IA is the ability to easily and inexpensively build Wireless Sensing Networks (WSNs). By strategically deploying hundreds or thousands, if necessary, wireless sensing devices in a building, we can collect extensive information about the condition of buildings and materials in real-time. Such information would greatly help us to wisely use time, money, and other resources

Wireless sensor system for infrastructure health monitoring

In this thesis, radio frequency identification (RFID)-based wireless sensor system for infrastructure health monitoring (IHM) is designed and developed. It includes mountable semi-passive tag antenna integrated sensors capable of measuring critical responses of infrastructure such as dynamic acceleration and strain. Furthermore, the system is capable of measuring structural displacement. One of the most important parts of this system is the relatively small, tunable, construction material mountable RFID tag antenna. The tag antenna is electronically integrated with the sensors. Leading to the process of developing tag antenna integrated sensors having satisfactory wireless performance (sensitivity and read range) when mounted on concrete and metal structural members, the electromagnetic performance of the tag antenna is analyzed and optimized using both numerical and experimental procedures. Subsequently, it is shown that both the simulation and the experimental measurement results are in good agreement. The semi-passive RFID-based system is implemented in a wireless IHM system with multiple sensor points to measure dynamic acceleration and strain. The developed system can determine the natural frequencies of infrastructure and identify any state changes of infrastructure by measuring natural frequency shifts. Enhancement of the spectral bandwidth of the system has been performed under the constraints of the RFID hardware. The influence of the orientation and shape of the structural members on wireless power flow in the vicinity of those members is also investigated with the RFID reader-tag antenna system in both simulation and experiments. The antenna system simulations with a full-scale structural member have shown that both the orientation and the shape of the structural member influence the wireless power flow towards and in the vicinity of the member, respectively. The measurement results of the conducted laboratory experiments using the RFID antenna system in passive mode have shown good agreement with simulation results. Furthermore, the system’s ability to measure structural displacement is also investigated by conducting phase angle of arrival measurements. It is shown that the system in its passive mode is capable of measuring small structural displacements within a short wireless distance. The benchmarking of the developed system with independent, commercial, wired and wireless measurement systems has confirmed the ability of the RFID-based system to measure dynamic acceleration and strain. Furthermore, it has confirmed the system’s ability to determine the natural frequency of an infrastructure accurately. Therefore, the developed system with wireless sensors that do not consume battery power in data transmission and with the capability of dynamic response measurement is highly applicable in IHM

Development of Sensor Integrated and Inkjet-Printed Tag Antennas for Passive UHF RFID Systems

Radio frequency identification (RFID) is a form of automated identification technology that is nowadays widely used to replace bar codes in asset tracking and management. Looking ahead to the future, our lives will be surrounded by small, embedded and wireless electronic devices that provide information about everything for everybody through pervasive computing. At the core of this vision lie two key concepts of ubiquitous sensing and the Internet of Things. RFID technology is seen as one of the most prominent technologies of today for the implementation of these future concepts. Ubiquitous sensing describes a situation, where small embedded sensors monitoring various environmental parameters are found everywhere. The second concept, the Internet of Things, requires that all objects, even the most insignificant everyday items, surrounding us should encompass computing and communication capabilities of some sort. In its simplest form, such computing could be a transponder that allows the unique identification and tracking of the item. Together these future concepts could truly revolutionize our lives by delivering significantly more information from our living environment. The objectives of this thesis are twofold. Firstly, passive ultra-high frequency (UHF) RFID technology is utilized to develop low cost, completely passive, wireless sensor devices for ubiquitous sensing applications. Secondly, inkjet-printed passive UHF RFID tag antennas are developed and optimization techniques are presented to lower the cost of such tag antenna implementations. The latter objective aims to facilitate the advancement of the Internet of Things by enabling tag antennas to be directly printed on or in to various objects. As a result of the research work presented in this thesis, three different passive UHF RFID based sensor tags were developed. Two of these designs monitor temperature and one is developed for relative humidity measurements. For the first time, the applicability and accuracy of such passive sensor tags was demonstrated. The results show that UHF RFID sensor tags have potential to be utilized as low cost sensor devices in ubiquitous applications. In addition, this thesis presents methods to lower the costs of inkjet-printed tag antennas. A technique was developed to reduce the ink consumption significantly to produce high performance tag antennas. Moreover, a special type of tag antenna design consisting of very narrow lines was developed. Finally, novel electronic materials were used as tag antenna substrate materials for inkjet-printed tag antennas. The use of a high permittivity ceramic-polymer composite, wood veneer, paper and cardboard were demonstrated. In each case, it was shown that inkjet-printing is a feasible form of fabrication on such materials, producing passive UHF RFID tags with long read ranges. This shows that tag antennas can be inkjet-printed directly on to various items to advance the realization of the Internet of Things

Electromagnetic Assessment of UHF-RFID Devices in Healthcare Environment

In this work, the evaluation of electromagnetic effect of Ultra High Frequency Radio Frequency Identification (UHF-RFID) passive tags used in the healthcare environment is presented. In order to evaluate exposure levels caused by EM field (865–868 MHz) of UHF-RFID readers, EM measurements in an anechoic chamber and in a real medical environment (Hospital Universitario de Canarias), as well as simulations by 3D Ray Launching algorithm, and of biophysical exposure effects in human models are presented. The results obtained show that the EM exposure is localized, in close vicinity of RFID reader and inversely proportional to its reading range. The EM exposure levels detected are sufficient to cause EM immunity effects in electronic devices (malfunctions in medical equipment or implants). Moreover, more than negligible direct effects in humans (exceeding relevant SAR values) were found only next to the reader, up to approximately 30% of the reading range. As a consequence, the EM risk could be firstly evaluated based on RFID parameters, but should include an in situ exposure assessment. It requires attention and additional studies, as increased applications of monitoring systems are observed in the healthcare sector—specifically when any system is located close to the workplace that is permanently occupied.This work was supported by Instituto de Salud Carlos III project “Electromagnetic “Characterization in Smart Environments of Healthcare, and their involvement in Personal, Occupational, and Environmental Health” (PI14CIII/00056) https://portalfis.isciii.es/es/Paginas/DetalleProyecto. aspx?idProyecto=PI14CIII%2f00056 (accessed on 24 July 2022), and project “ (PI19CIII/00033) TMPY 508/19 “ Metrics development for electromagnetic safety assessment in healthcare centers in the context of 5G“ https://portalfis.isciii.es/es/Paginas/DetalleProyecto.aspx?idProyecto=PI19 CIII%2f00033, (accessed on 24 July 2022) from Sub-Directorate-General for Research Assessment and Promotion. The results of a research task (II.PB.15) carried out within the National Programme “Improvement of safety and working conditions” partly supported in Poland in 2020-2022-within the scope of research and development-by the National Centre for Research and Development were also included.S

Dense and long-term monitoring of Earth surface processes with passive RFID -- a review

Billions of Radio-Frequency Identification (RFID) passive tags are produced yearly to identify goods remotely. New research and business applications are continuously arising, including recently localization and sensing to monitor earth surface processes. Indeed, passive tags can cost 10 to 100 times less than wireless sensors networks and require little maintenance, facilitating years-long monitoring with ten's to thousands of tags. This study reviews the existing and potential applications of RFID in geosciences. The most mature application today is the study of coarse sediment transport in rivers or coastal environments, using tags placed into pebbles. More recently, tag localization was used to monitor landslide displacement, with a centimetric accuracy. Sensing tags were used to detect a displacement threshold on unstable rocks, to monitor the soil moisture or temperature, and to monitor the snowpack temperature and snow water equivalent. RFID sensors, available today, could monitor other parameters, such as the vibration of structures, the tilt of unstable boulders, the strain of a material, or the salinity of water. Key challenges for using RFID monitoring more broadly in geosciences include the use of ground and aerial vehicles to collect data or localize tags, the increase in reading range and duration, the ability to use tags placed under ground, snow, water or vegetation, and the optimization of economical and environmental cost. As a pattern, passive RFID could fill a gap between wireless sensor networks and manual measurements, to collect data efficiently over large areas, during several years, at high spatial density and moderate cost.Comment: Invited paper for Earth Science Reviews. 50 pages without references. 31 figures. 8 table

Digitally Fabricated Epidermal Transfer Tattoo UHF Radio Frequency Identification Tags

This thesis focuses on the inkjet printing of UHF RFID tags in the form of transfer tattoos for use on the skin. Inkjet printing of these tags is proposed as a cheaper and more appropriate alternative to conventional etching. The work seeks to assesses the performance of inkjet printed epidermal RFID tags using parameters such as read range, transmitted power and backscattered power. The effect of different printing parameters such as the number of conductive ink layers, sintering time and temperature on the performance of the tags are assessed by simulation and measurement. Additionally, techniques to reduce the volume of conductive ink used for the fabrication of the tag are also examined and compared with an aim to determine which has the best achieved read range and ink utilization balance. This would help to reduce the cost of fabrication of the tags. Also, due to some defects being introduced to the tags during the printing process because of printing conditions and characteristics inherent to the printing technology, the effects of these defects on the performance of the printed tag is also examined by simulation and measurement. The robustness of the epidermal transfer tattoo tag was further experimentally determined by exposure to everyday use conditions and situations involving sweat and mechanical friction. Finally, a diversity study on an inkjet printed tag integrated with a medical sticking plaster was performed. This involved the use of two to four tags placed horizontally and vertically in order to determine which orientation offers better read coverage in each of the diversity setups while a volunteer carried out a set of motions

Electromagnetic assessment of UHF-RFID devices in healthcare environment

In this work, the evaluation of electromagnetic effect of Ultra High Frequency Radio Frequency Identification (UHF-RFID) passive tags used in the healthcare environment is presented. In order to evaluate exposure levels caused by EM field (865–868 MHz) of UHF-RFID readers, EM measurements in an anechoic chamber and in a real medical environment (Hospital Universitario de Canarias), as well as simulations by 3D Ray Launching algorithm, and of biophysical exposure effects in human models are presented. The results obtained show that the EM exposure is localized, in close vicinity of RFID reader and inversely proportional to its reading range. The EM exposure levels detected are sufficient to cause EM immunity effects in electronic devices (malfunctions in medical equipment or implants). Moreover, more than negligible direct effects in humans (exceeding relevant SAR values) were found only next to the reader, up to approximately 30% of the reading range. As a consequence, the EM risk could be firstly evaluated based on RFID parameters, but should include an in situ exposure assessment. It requires attention and additional studies, as increased applications of monitoring systems are observed in the healthcare sector—specifically when any system is located close to the workplace that is permanently occupied.This work was supported by Instituto de Salud Carlos III project “Electromagnetic Characterization in Smart Environments of Healthcare, and their involvement in Personal, Occupational, and Environmental Health” (PI14CIII/00056), and project (PI19CIII/00033) TMPY 508/19 “Metrics development for electromagnetic safety assessment in healthcare centers in the context of 5G“ from Sub-Directorate-General for Research Assessment and Promotion. The results of a research task (II.PB.15) carried out within the National Programme “Improvement of safety and working conditions” partly supported in Poland in 2020–2022—within the scope of research and development—by the National Centre for Research and Development were also included

Next generation RFID telemetry design for biomedical implants.

The design and development of a Radio Frequency Identification (RFID) based pressure-sensing system to increase the range of current Intra-Ocular Pressure (IOP) sensing systems is described in this dissertation. A large number of current systems use near-field inductive coupling for the transfer of energy and data, which limits the operational range to only a few centimeters and does not allow for continuous monitoring of pressure. Increasing the powering range of the telemetry system will offer the possibility of continuous monitoring since the reader can be attached to a waist belt or put on a night stand when sleeping. The system developed as part of this research operates at Ultra-High Frequencies (UHF) and makes use of the electromagnetic far field to transfer energy and data, which increases the potential range of operation and allows for the use of smaller antennas. The system uses a novel electrically small antenna (ESA) to receive the incident RF signal. A four stage Schottky circuit rectifies and multiplies the received RF signal and provides DC power to a Colpitts oscillator. The oscillator is connected to a pressure sensor and provides an output signal frequency that is proportional to the change in pressure. The system was fabricated using a mature, inexpensive process. The performance of the system compares well with current state of the art, but uses a smaller antenna and a less expensive fabrication process. The system was able to operate over the desired range of 1 m using a half-wave dipole antenna. It was possible to power the system over a range of at least 6.4 cm when the electrically small antenna was used as the receiving antenna

2012 PWST Workshop Summary

No abstract availabl