17 research outputs found

    High-speed optical fibre transmission using advanced modulation formats

    Get PDF
    The rapid growth in interactive bandwidth-hungry services demands ever higher capacity at various stages of the optical network, leading to a potential capacity exhaust, termed the capacity crunch. The main aim of the research work described in this thesis was to help solve the potential capacity crunch by exploring techniques to increase the data rate, spectral efficiency and reach of optical fibre systems. The focus was on the use of advanced signal modulation formats, including optical time-division multiplexing (OTDM), quadrature phase shift keying (QPSK), and 16-state quadrature amplitude modulation (QAM16). QPSK and QAM16 modulations formats were studied in combination with coherent detection and digital signal processing (DSP) for the compensation of transmission impairments. In addition, return-to-zero (RZ) pulses were explored to increase the tolerance towards nonlinearity for coherently detected signals, and nonlinearity compensation (NLC) through the DSP. Initially, to maximise the bit-rate, research was focused on the study of OTDM transmission at 80Gbit/s with the aim to optimise the phase difference between the adjacent OTDM channels. A new technique to achieve bit-wise phase control using a phase-stabilised fibre interferometer was proposed. Faced with a limited fibre capacity, the need to maximise the spectral efficiency became paramount, and thus the need to use phase, amplitude and polarisation domains for signal transmission. In combination with coherent detection the research focused on the performance of optical fibre systems using QPSK and QAM16 modulation formats, including their generation, transmission and detection in single-channel and WDM regimes. This included the study of the impact of pulse shapes, and the mitigation of linear and nonlinear transmission impairments with receiver-based DSP at bit-rates ranging from 42.7 to 224Gbit/s. The technique demonstrated for bit-wise phase control for OTDM was successfully used to demonstrate a new method for QAM16 signal generation. Longest transmission distances (up to 10160km in 112Gbit/s QPSK, 4240km in 112Gbit/s QAM16, and 2000km in 224Gbit/s QAM16) have been achieved with the use of NLC and RZ pulses. The efficiency of these two techniques is explored through a comprehensive set of experiments in both single-channel and WDM transmission experiments. The results can be used in the design of future optical transmission systems

    Quasi-lossless data transmission with ultra-long Raman fibre laser based amplification

    Get PDF
    The project consists of an experimental and numerical modelling study of the applications of ultra-long Raman fibre laser (URFL) based amplification techniques for high-speed multi-wavelength optical communications systems. The research is focused in telecommunications C-band 40 Gb/s transmission data rates with direct and coherent detection. The optical transmission performance of URFL based systems in terms of optical noise, gain bandwidth and gain flatness for different system configurations is evaluated. Systems with different overall span lengths, transmission fibre types and data modulation formats are investigated. Performance is compared with conventional Erbium doped fibre amplifier based system to evaluate system configurations where URFL based amplification provide performance or commercial advantages

    Cost-Effective Spectrally-Efficient Optical Transceiver Architectures for Metropolitan and Regional Links

    Get PDF
    The work presented herein explores cost-effective optical transceiver architectures for access, metropolitan and regional links. The primary requirement in such links is cost-effectiveness and secondly, spectral efficiency. The bandwidth/data demand is driven by data-intensive Internet applications, such as cloud-based services and video-on-demand, and is rapidly increasing in access and metro links. Therefore, cost-effective optical transceiver architectures offering high information spectral densities (ISDs > 1(b/s)/Hz) need to be implemented over metropolitan distances. Then, a key question for each link length and application is whether coherent- or direct (non-coherent) detection technology offers the best cost and performance trade-off. The performance and complexity limits of both technologies have been studied. Single polarization direct detection transceivers have been reviewed, focusing on their achievable ISDs and reach. It is concluded that subcarrier modulation (SCM) technique combined with single sideband (SSB) and high-order quadrature amplitude modulation (QAM) signaling, enabled by digital signal processing (DSP) based optical transceivers, must be implemented in order to exceed an ISD of 1 (b/s)/Hz in direct-detection links. The complexity can be shifted from the optical to the electrical domain using such transceivers, and hence, the cost can be minimized. In this regard, a detailed performance comparison of two spectrally-efficient direct detection SCM techniques, namely Nyquist-SCM and OFDM, is presented by means of simulations. It is found out that Nyquist-SCM format offers the transmission distances more than double that of OFDM due to its higher resilience to signal-signal beating interference. Following this, dispersion-precompensated SSB 4- and 16-QAM Nyquist-SCM signal formats were experimentally demonstrated using in-phase and quadrature (IQ)-modulators at net optical ISDs of 1.2 and 2 (b/s)/Hz over 800 km and 323 km of standard single-mode fibre (SSMF), respectively. These demonstrations represent record net optical ISDs over such distances among the reported single polarization wavelength division multiplexed (WDM) systems. Furthermore, since the cost-effectiveness is crucial, the optical complexity of Nyquist-SCM transmitters can be significantly reduced by using low-cost modulators and high-linewidth lasers. A comprehensive theoretical study on SSB signal generation using IQ- and dual-drive Mach-Zehnder modulators (DD-MZMs) was carried out to assess their performance for WDM direct detection links. This was followed by an experimental demonstration of WDM transmission over 242 km of SSMF with a net optical ISD of 1.5 (b/s)/Hz, the highest achieved ISD using a DD-MZM-based transmitter. Following the assessment of direct detection technology using various transmitter designs, cost-effective simplified coherent receiver architectures for access and metro networks have been investigated. The optical complexity of the conventional (polarization- and phase-diverse) coherent receiver is significantly simplified, i.e., consisting of a single 3 dB coupler and balanced photodetector, utilizing heterodyne reception and Alamouti polarization-time block coding. Although the achievable net optical ISD is halved compared to a conventional coherent receiver due to Alamouti coding, its receiver sensitivity provides significant gain over a direct detection receiver at M-ary QAM formats where M ≥16

    Programmable DSP-enabled multi-adaptive optical transceivers based on OFDM technology for software defined networks

    Get PDF
    The dynamic behavior of the traffic demand, due to the advent of technologies such as cloud services or Internet of Things (IoT), is increasing. In fact, heterogeneous connections with different characteristics (bandwidth or bit rate) are expected that coexist in the optical networks. In this respect, an evolution towards Elastic Optical Networks (EONs) has emerged as a cost-effective, flexible and dynamic solution, to face the new claims. The main idea is the efficient utilization of the optical spectrum by combining flexible transceivers, flexi-grid and flexible optical switching. Including the principles of Software Defined Network (SDN) paradigm further flexibility and adaptability can be achieved. The Sliceable Bandwidth Variable Transceiver (S-BVT), as a key element in EONs, provides flexibility and adaptability to the optical networks. It is able to dynamically tune the optical bandwidth or bit rate changing parameters such as the modulation format, bandwidth, among others, to find a trade-off between transmission reach and spectral efficiency, serving multiples destinations. The combination of programmable Digital Signal Processing (DSP) modules with advanced transmission techniques based on Orthogonal Frequency Division Multiplexing (OFDM) technology using Direct Detection (DD) or COherent (CO) detection are proposed to be implemented at the S-BVT making it suitable for elastic optical metro/regional networks. Furthermore, the envisioned migration from fixed-grid to flexi-grid, can benefit from the use of S-BVTs since they are able to generate or receive multiple channels and slicing the aggregated flow into multiples flows with different capacities and destinations. We propose the use of S-BVTs based on multi-band OFDM systems. In particular, we focus on the theoretical model of an advanced transmission technique based on OFDM technology with DD. Then we evaluate the system for a realistic optical metro network. In the context of flexi-grid optical metro/regional networks, as well as the sliceability of the channels, the reduction of channel width for low bit rate connections can be envisioned. It involves that the signal traverses several nodes with the corresponding filtering elements, causing a substantially decrease and distortion of the signal bandwidth. This phenomenon known as filter narrowing effect has been also studied in this thesis, by simulations and experimentally for an adaptive cost-effective OFDM system using DD and for a standard OOK system. Apart from adaptive, flexible and programmable transceivers, metro optical networks have to be equipped with flexible optical switching systems at the node level. In this respect, we propose the adoption of adaptive S-BVTs based on advanced transmission techniques using DD with Discrete MultiTone (DMT) modulation and adaptive capabilities in combination with Semiconductor Optical Amplier (SOA)-based switching nodes. SOAs can be conveniently used for optical switching in metro networks because of their low cost or low power consumption, among others relevant characteristics. The system has been experimentally analyzed with and without considering filtering elements. Thanks to the combination of adaptive DMT modulation and SOA-based switching nodes, impairments due to the fiber links and the filtering elements can be compensated. Finally, to enhance the tranmission distance and data rate, we propose the combination of multidimensional constellations implemented at the DSP modules of the S-BVT with CO detection and OFDM technology. Thus, the deployed infrastructure is more efficiently exploited since the quadrature and the polarization dimensions are used to transmit the signal. In particular, we focus on CO-OFDM systems using Dual Polarization Quadrature Phase Shift Keying (DPQPSK) constellation transmitting the signal over the time and the polarization dimensions in the optical domain.El comportamiento dinámico de la demanda de tráfico, debido a la llegada de tecnologías como los servicios en la nube o el Internet of Things (IoT), está aumentando. De hecho, se espera que coexistan en las redes ópticas conexiones heterogéneas con características diferentes, tales como ancho de banda o tasa de bits. Para hacer frente a estas demandas es crucial una evolución de las redes ópticas. En este sentido, las Elastic Optical Networks (EONs) emergen como una solución rentable, flexible y dinámica. La idea principal se basa en la utilización eficiente del espectro óptico mediante la combinación de transceptores flexibles, redes flexibles y conmutación óptica flexible. Una mayor flexibilidad y adaptabilidad se puede conseguir incluyendo los principios del paradigma conocido como Software Defined Network (SDN). La adopción de la arquitectura SDN implica la separación del plano de control y de datos, permitiendo la programabilidad dinámica de la red. Un elemento clave en las EONs es el Sliceable Bandwidth Variable Transceiver (SBVT), ya que provee de flexibilidad y adaptabilidad a las redes ópticas. El S-BVT es capaz de cambiar el ancho de banda o la tasa de bits medicando parámetros como el formato de modulación, el ancho de banda o la codificación de Forward Error Correction (FEC), entre otros, para encontrar un equilibrio entre el alcance de la transmisión y la eficiencia espectral, sirviendo múltiples destinos. La combinación de módulos programables de Digital Signal Processing (DSP) con técnicas de transmisión avanzadas, basadas en la tecnología Orthogonal Frequency Division Multiplexing (OFDM) con detección directa o detección coherente, se han propuesto para ser implementadas en el S-BVT, haciéndolo adecuado para su uso en redes ópticas elásticas metropolitanas y regionales. Además, la migración prevista de las redes fijas a las redes flexibles, con el fin de explotar la granularidad de 12:5 GHz, puede beneficiarse del uso de S-BVTs ya que son capaces de generar y recibir múltiples canales y dividir el flujo agregado en múltiples flujos con diferentes capacidades y destinos. A este respecto, proponemos el uso de S-BVTs basados en señales OFDM multi banda combinadas en el dominio eléctrico con el fin de limitar los recursos optoelectrónicas y relajar los requerimientos de los convertidores digitales analógicos y analógicos digitales. En particular, nos centramos en el modelo teórico de una técnica de transmisión avanzada basada en la tecnología OFDM con detección directa. A continuación, evaluamos el sistema para una red metropolitana óptica realista. En el contexto de redes metropolitanas y regionales flexibles, además de la capacidad de división de los canales, se puede prever una posible reducción del ancho de canal para las conexiones de baja tasa de bits. Esto implica que la señal atraviese varios nodos con los correspondientes elementos filtrantes causando un substancial decremento y distorsión del ancho de banda de la señal. Este fenómeno conocido como el efecto de estrechamiento de filtrado ha sido también estudiado en esta tesis, mediante simulaciones y de manera experimental para un sistema OFDM rentable y adaptativo usando detección directa y un sistema estándar On-Off Keying (OOK). El sistema OFDM de detección directa ha resultado ser un buen candidato para aumentar la flexibilidad y la robustez frente a las deficiencias de transmisión sin necesidad de compensar la dispersión. Aparte de los transceptores adaptables, flexibles y programables, las redes ópticas metropolitanas deben estar equipadas con sistemas de conmutación óptica flexible a nivel de nodo. En este sentido, proponemos la adopción de S-BVTs adaptativos basados en técnicas de transmisión avanzadas usando detección directa con modulación Discrete MultiTone (DMT) y capacidades adaptativas, adoptando nodos de conmutación basados en Semiconductor Optical Amplifier (SOA). Los SOAs pueden ser utilizados para la conmutación óptica en redes metropolitanas debido a su bajo coste o bajo consumo de energía, entre otras características relevantes. El sistema ha sido analizado experimentalmente considerando y sin considerar la presencia de elementos filtrantes. Gracias a la combinación de la modulación DMT adaptativa y los nodos de conmutación basados en SOA, las degradaciones debidas a los enlaces de fibra y a los elementos filtrantes se pueden compensar. Finalmente, para mejorar la distancia de transmisión y la tasa de datos, proponemos la combinación de constelaciones multidimensionales implementadas en los módulos DSP del S-BVT utilizando detectaron coherente y la tecnología OFDM. De hecho, los sistemas OFDM coherentes tienen un espacio de señal 4D (dos cuadraturas y dos polarizaciones), que puede ser utilizado con constelaciones multidimensionales, pudiendo éstas ser más eficientes que las convencionales Binary Phase-Shift Keying (BPSK) o Quadrature Phase-Shift Keying (QPSK). De este modo, la infraestructura desplegada se explota de manera más eficiente, ya que tanto la dimensión de cuadratura como de polarización se utilizan para transmitir la señal. Además, los sistemas OFDM coherentes pueden recuperar la amplitud y la fase de la señal en el receptor, mitigando los efectos de la fibra aumentando, de esta forma, la distancia de transmisión. El sistema OFDM coherente que utiliza el formato de constelación Dual Polarization Quadrature Phase Shift Keying (DPQPSK) y que transmite la señal a lo largo del tiempo ha demostrado ser una solución prometedora.El comportament dinàmic de la demanda de transit, a causa de l'arribada de tecnologies, com poden ser els serveis al núvol o l'Internet of Things (IoT), està creixent. De fet, s'espera que coexisteixin a les xarxes òptiques connexions heterogènies amb característiques diferents, tal com l'ample de banda o la taxa de bits. Per a fer front a aquestes demandes és crucial una revolució de les xarxes òptiques. En aquest sentit, les Elastic Optical Networks (EONs) emergeixen com una solució rendible, flexible i dinàmica. La idea principal es basa en la utilització eficient de l'espectre òptic mitjançant la combinació de transceptors flexibles, xarxes flexibles i commutació òptica flexible. Una major flexibilitat i adaptabilitat es pot aconseguir incloent els principis del paradigma conegut com a Software Defined Networks (SDN). L’adopció de l'arquitectura SDN implica la separació del plànol de control i de dades permetent la programabilitat de la xarxa d'una forma dinàmica. Un element clau en les EONs és l'Sliceable Bandwith Variable Transceiver (S-BVT), ja que aporta flexibilitat i adaptabilitat a les xarxes òptiques. L' S-BVT és capaç de canviar l'ample de banda o la taxa de bits modificant paràmetres com el format de modulació, l'ample de banda o la codificació del Forward Error Correction (FEC), entre altres, per a trobar un equilibri entre l’assistència assolida i l’eficiència espectral, servint múltiples destinacions. La combinació de mòduls de Digital Signal Processing (DSP) amb tècniques de transmissió avançades basades en la tecnologia Orthogonal Frequency Division Multiplexing (OFDM) i detecció directa o detecció coherent s'han proposat per a ser implementades en l'S-BVT, fent-lo adient per a les xarxes òptiques elàstiques metropolitanes i regionals. A més, la migració prevista des de les xarxes fixes a les xarxes flexibles, amb el fi d'explotar la granuralitat de 12:5GHz, pot beneficiar-se de l’ús d'S-BVTs ja que són capaços de generar i rebre múltiples canals i dividir el flux agregat en múltiples fluxos amb diferents capacitats i destinacions. Per aquest motiu, proposem l’ús d'S-BVTs basats en senyals OFDM multi banda combinats en el domini elèctric amb el fi de limitar els recursos optoelectrònics i relaxar els requeriments dels convertidors digitals analògics i analògics digitals. Particularment, ens centrem en el model teòric d'una tècnica de transmissió avançada basada en la tecnologia OFDM amb detecció directa. A continuació, avaluem el sistema per a una xarxa metropolitana òptica realista. En el context de xarxes metropolitanes i regionals flexibles, a més de la propietat de divisió dels canals, es pot preveure una possible reducció de l'ample de canal per a les connexions de baixa taxa de bits. Això implica que el senyal travessi diversos nodes amb els corresponents elements filtrants causant un substancial decrement i distorsió de l'ample de banda del senyal. Aquest fenomen conegut com l'efecte d'estretament de filtrat ha sigut també estudiat en aquesta tesi, mitjançant simulacions i de manera experimental en el cas d'un sistema OFDM rendible i adaptatiu utilitzant detecció directa i un sistema estàndard On-Off Keying (OOK). El sistema OFDM de detecció directa ha resultat ser un bon candidat per augmentar la flexibilitat i la robustesa front a les deficiències de transmissió sense necessitat de compensar la dispersió. A part dels transceptors adaptables, flexibles i programables, les xarxes òptiques metropolitanes han d'estar equipades amb sistemes de commutació òptica flexible a nivell de node. En aquest sentit, proposem l’adopció d'un S-BVT adaptatiu basat en tècniques de transmissió avançades i utilitzant detecció directa amb modulació Discrete MultiTone (DMT) i capacitats adaptatives, adoptant nodes de comunicació basats en Semi-conductor Optical Amplifier (SOA). Els SOAs poden ser utilitzats per la commutació _òptica en xarxes metropolitanes degut al seu baix cost o baix consum d'energia, entre altres característiques rellevants. El sistema ha sigut analitzat experimentalment considerant i sense considerar la presència d'elements filtrants. Gràcies a la combinació de la modulació DMT adaptativa i dels nodes de commutació basats en SOA, les degradacions degudes als enllaços de fibra i als elements filtrants es poden compensar. Finalment, per a millorar la distància de transmissió i la taxa de dades, proposem la combinació de constel·lacions multidimensionals implementades als mòduls DSP de l'SBVT utilitzant detecció coherent i la tecnologia OFDM. De fet, els sistemes coherents OFDM tenen un espai de senyal 4D (dues quadratures i dues polaritzacions), que pot ser utilitzat amb constel·lacions multidimensionals, arribant a ser més eficients que les modulacions convencionals Binary Phase-Shift Keying (BPSK) o Quadrature Phase-Shift Keying (QPSK). D'aquesta manera, la infraestructura desplegada s'explota de forma més eficient, ja que tant la dimensió de quadratura com de polarització s'utilitzen per transmetre el senyal. A més, els sistemes coherents basats en OFDM poden recuperar l'amplitud i la fase del senyal en el receptor, mitigant els efectes de la fibra i d'aquesta forma augmentant la distància de transmissió. El sistema OFDM coherent que utilitza el format de constel·lació Dual Polarization Quadrature Phase Shift Keying (DPQPSK) i que transmet el senyal al llarg del temps ha demostrat ser una solució prometedora.Postprint (published version

    Optical multicarrier sources for spectrally efficient optical networks

    Get PDF
    During the last 30 years the capacity of commercial optical systems exceeded the network traffic requirements, mainly due to the extraordinary scalability of wavelength division multiplexing technology that has been successfully used to expand capacity in optical systems and meet increasing bandwidth requirements since the early 1990’s. Nevertheless, the rapid growth of network traffic inverted this situation and current trends show faster growing network traffic than system capacity. To enable further and faster growth of optical communication network capacity, several breakthroughs occurred during the last decade. First, optical coherent communications, which were the subject of intensive research in the 1980’s, were revived. This triggered the employment of advanced modulation formats. Afterwards, with the introduction of orthogonal frequency division multiplexing (OFDM) and Nyquist WDM modulation techniques in optical communication systems, very efficient utilisation of the available spectral bandwidth was enabled. In such systems the spectral guard bands between neighbouring channels are minimised, at the expense of stricter requirements on the performance of optical sources, especially the frequency (or wavelength) stability. Attractive solutions to address the frequency stability issues are optical multicarrier sources which simultaneously generate multiple phase correlated optical carriers that ensure that the frequency difference between the carriers is fixed. In this thesis, a number of optical multicarrier sources are presented and analysed, with special focus being on semiconductor mode-locked lasers and gain-switched comb sources. High capacity and spectrally efficient optical systems for short and medium reach applications (from 3 km up to 300 km), based on optical frequency combs as optical sources, advanced modulation formats (m-QAM) and modulation techniques (OFDM and Nyquist WDM) have been proposed and presented. Also, certain optoelectronic devices (i.e. semiconductor optical amplifier) and techniques (feed-forward heterodyne linewidth reduction scheme) have been utilised to enable the desired system performance

    Enabling Technologies for Cognitive Optical Networks

    Get PDF

    Implementation and investigation of a real-time optical 16-QAM transmission system with FPGA-based coherent receiver

    Get PDF
    Diese Dissertation stellt die erste Echtzeitübertragung von 16-QAM mit FPGA-basierter DSPU vor. 2.5 Gb/s wurden dabei über 20 und 100 km übertragen und kohärent (heterodyn) in Echtzeit empfangen. Die Bitfehlerquote (BER) lag dabei unterhalb der Schwelle moderner Fehlervorwärtskorrekturverfahren mit 7% Overhead. Mit BPS (Blind Phase Search) und QPSK partitioning (QPSKP) wurden zwei unterschiedliche Techniken zur Phasenrückgewinnung implementiert und durch Echtzeitmessung verglichen. Der Einfluss der Auflösung der erforderlichen Analog-Digital-Umsetzer (ADC) wurde ebenfalls untersucht, welche ebenfalls eine Herausforderung für kohärente Echtzeitübertragung darstellt. Der Einfluss von Phasenrauschen wird hier auch gezeigt, welches vorwiegend von den verwendeten Lasern, optischen Verstärkern und nichtlinearen Effekten in den optischen Fasern abhängt. Darüber hinaus wurden verschiedene Arbeitspunkte des 16-QAM-Modulators in Echtzeit getestet und die optimalen Bedingungen für eine minimale Bitfehlerquote gefunden.In this dissertation the first published real-time implementation of a 16-QAM transmission system with FPGA-based DSP is presented. 2.5 Gb/s coherent 16-QAM data has been optically transmitted over 20 and 100 km and synchronously received by heterodyning in a real-time I&Q receiver, with BER below the threshold of a state-of-the-art FEC (7% overhead). Two techniques of feed-forward carrier phase recovery (Blind Phase Search (BPS) and QPSK partitioning (QPSKP)) were tested in a real-time transmission experiment and compared with each other. The influence of the required resolution of the analog-to-digital converter (ADC) has been investigated, which is a challenge of real-time coherent transmission systems. The influence of phase noise in 16-QAM, which is mainly contributed from laser sources, optical amplifiers, and nonlinear effects in optical fibers is also shown. Moreover, different operation points of a 16-QAM modulator were tested in real-time and an optimal condition is found which minimizes the BER.Tag der Verteidigung: 10.09.2013Paderborn, Univ., Diss., 201

    Single-Laser Multi-Terabit/s Systems

    Get PDF
    Optical communication systems carry the bulk of all data traffic worldwide. This book introduces multi-Terabit/s transmission systems and three key technologies for next generation networks. A software-defined multi-format transmitter, an optical comb source and an optical processing scheme for the fast Fourier transform for Tbit/s signals. Three world records demonstrate the potential: The first single laser 10 Tbit/s and 26 Tbit/s OFDM and the first 32.5 Tbit/s Nyquist WDM experiments

    Single-Laser Multi-Terabit/s Systems

    Get PDF
    Optical communication systems carry the bulk of all data traffic worldwide. This book introduces multi-Terabit/s transmission systems and three key technologies for next generation networks. A software-defined multi-format transmitter, an optical comb source and an optical processing scheme for the fast Fourier transform for Tbit/s signals. Three world records demonstrate the potential: The first single laser 10 Tbit/s and 26 Tbit/s OFDM and the first 32.5 Tbit/s Nyquist WDM experiments

    Advanced DSP Techniques for High-Capacity and Energy-Efficient Optical Fiber Communications

    Get PDF
    The rapid proliferation of the Internet has been driving communication networks closer and closer to their limits, while available bandwidth is disappearing due to an ever-increasing network load. Over the past decade, optical fiber communication technology has increased per fiber data rate from 10 Tb/s to exceeding 10 Pb/s. The major explosion came after the maturity of coherent detection and advanced digital signal processing (DSP). DSP has played a critical role in accommodating channel impairments mitigation, enabling advanced modulation formats for spectral efficiency transmission and realizing flexible bandwidth. This book aims to explore novel, advanced DSP techniques to enable multi-Tb/s/channel optical transmission to address pressing bandwidth and power-efficiency demands. It provides state-of-the-art advances and future perspectives of DSP as well
    corecore