Power Efficient Data-Aware SRAM Cell for SRAM-Based FPGA Architecture

The design of low-power SRAM cell becomes a necessity in today\u27s FPGAs, because SRAM is a critical component in FPGA design and consumes a large fraction of the total power. The present chapter provides an overview of various factors responsible for power consumption in FPGA and discusses the design techniques of low-power SRAM-based FPGA at system level, device level, and architecture levels. Finally, the chapter proposes a data-aware dynamic SRAM cell to control the power consumption in the cell. Stack effect has been adopted in the design to reduce the leakage current. The various peripheral circuits like address decoder circuit, write/read enable circuits, and sense amplifier have been modified to implement a power-efficient SRAM-based FPGA

Low Leakage and PDP Optimized FinFET based 8T SRAM Design

The paper proposes a Fin Field Effect Transistors (FinFETs) based SRAM design comprising of 8 transistors. The circuit utilizes channel length of 22 nanometers. The operation of this circuit is dependent upon the control switch CS that decides the operating mode and minimizes the leakage current flowing in the cell which in turn lowers the leakage power to a minimal value of 0.331pW. The read buffer available in the design provides a different path for read mode and also enhances the Read Static Noise Margin (RSNM), thus enhancing the readability of the circuit.This design is also able to operate at a minimal voltage of 70mV, thus efficiently utilizing the power available. It also optimizes the power delay product (PDP) for both read and write operations

A 0.3V 1kb Sub-Threshold SRAM for Ultra-Low-Power Application in 90nm CMOS

[[notice]]缺頁數[[conferencetype]]國際[[conferencedate]]20120715~20120718[[booktype]]電子版[[iscallforpapers]]Y[[conferencelocation]]Sapporo, Japa

-Memory Computing Based Reliable and High Speed Schmitt trigger 10T SRAM cell design

Static random access memories (SRAM) are useful building blocks in various applications, including cache memories, integrated data storage systems, and microprocessors. The von Neumann bottleneck difficulties are solved by in-memory computing. It eliminates unnecessary frequent data transfer between memory and processing units simultaneously. In this research, the replica-based 10T SRAM design for in-memory computing (IMC) is designed by adapting the word line control scheme in 14nm CMOS technology. In order to achieve high reading and writing capability, the Schmitt trigger inverter was used for energy-saving and stable use. To speed up the writing process of the design, a single transistor is inserted between the cross-coupled inverters. In addition, to increase the node capacity, the voltage boosting circuitry is emphasized. The adaptive word line control scheme was utilized by integrating the replica column based circuit. The Replica approach regulates signal flow through the core by using a dummy column and a dummy row in RAM. To demonstrate the viability of the suggested design, the simulated outcomes are contrasted with those of existing designs. The various performance metrics examined are Read Static Noise Margin (RSNM), Write (WSNM), Hold (HSNM), Read Access Delay (RAD), Write Access Delay (WAD), Read performance and Write performance the varying supply voltage is evaluated

ULTRALOW-POWER, LOW-VOLTAGE DIGITAL CIRCUITS FOR BIOMEDICAL SENSOR NODES

Ph.DDOCTOR OF PHILOSOPH

A 300mV 10MHz 4kb 10T Subthreshold SRAM for Ultralow-Power Application

[[notice]]缺頁數[[conferencetype]]國際[[conferencedate]]20121104~20121107[[booktype]]電子版[[iscallforpapers]]Y[[conferencelocation]]New Taipei City, Taiwa

Energy optimization of 6T SRAM cell using low-voltage and high-performance inverter structures

The performance of the cell deteriorates, when static random access memory (SRAM) cell is operated below 1V supply voltage with continuous scale down of the complementary metal oxide semiconductor (CMOS) technology. The conventional 6T, 8T-SRAM cells suffer writeability and read static noise margins (SNM) at low-voltages leads to degradation of cell stability. To improve the cell stability and reduce the dynamic power dissipation at low- voltages of the SRAM cell, we proposed four SRAM cells based on inverter structures with less energy consumption using voltage divider bias current sink/source inverter and NOR/NAND gate using a pseudo-nMOS inverter. The design and implementation of SRAM cell using proposed inverter structures are compared with standard 6T, 8T and ST-11T SRAM cells for different supply voltages at 22-nm CMOS technology exhibit better performance of the cell. The read/write static noise margin of the cell significantly increases due to voltage divider bias network built with larger cell-ratio during read path. The load capacitance of the cell is reduced with minimized switching transitions of the devices during high-to-low and low- to-high of the pull-up and pull-down networks from VDD to ground leads to on an average 54% of dynamic power consumption. When compared with the existing ones, the read/write power of the proposed cells is reduced to 30%. The static power gets reduced by 24% due to stacking of transistors takes place in the proposed SRAM cells as compare to existing ones. The layout of the proposed cells is drawn at a 45-nm technology, and occupies an area of 1.5 times greater and 1.8 times greater as compared with 6T-SRAM cell

Design and analysis of SRAMs for energy harvesting systems

PhD ThesisAt present, the battery is employed as a power source for wide varieties of microelectronic systems ranging from biomedical implants and sensor net-works to portable devices. However, the battery has several limitations and incurs many challenges for the majority of these systems. For instance, the design considerations of implantable devices concern about the battery from two aspects, the toxic materials it contains and its lifetime since replacing the battery means a surgical operation. Another challenge appears in wire-less sensor networks, where hundreds or thousands of nodes are scattered around the monitored environment and the battery of each node should be maintained and replaced regularly, nonetheless, the batteries in these nodes do not all run out at the same time. Since the introduction of portable systems, the area of low power designs has witnessed extensive research, driven by the industrial needs, towards the aim of extending the lives of batteries. Coincidentally, the continuing innovations in the field of micro-generators made their outputs in the same range of several portable applications. This overlap creates a clear oppor-tunity to develop new generations of electronic systems that can be powered, or at least augmented, by energy harvesters. Such self-powered systems benefit applications where maintaining and replacing batteries are impossi-ble, inconvenient, costly, or hazardous, in addition to decreasing the adverse effects the battery has on the environment. The main goal of this research study is to investigate energy harvesting aware design techniques for computational logic in order to enable the capa- II bility of working under non-deterministic energy sources. As a case study, the research concentrates on a vital part of all computational loads, SRAM, which occupies more than 90% of the chip area according to the ITRS re-ports. Essentially, this research conducted experiments to find out the design met-ric of an SRAM that is the most vulnerable to unpredictable energy sources, which has been confirmed to be the timing. Accordingly, the study proposed a truly self-timed SRAM that is realized based on complete handshaking protocols in the 6T bit-cell regulated by a fully Speed Independent (SI) tim-ing circuitry. The study proved the functionality of the proposed design in real silicon. Finally, the project enhanced other performance metrics of the self-timed SRAM concentrating on the bit-line length and the minimum operational voltage by employing several additional design techniques.Umm Al-Qura University, the Ministry of Higher Education in the Kingdom of Saudi Arabia, and the Saudi Cultural Burea

Low-power and high-performance SRAM design in high variability advanced CMOS technology

As process technologies shrink, the size and number of memories on a chip are exponentially increasing. Embedded SRAMs are a critical component in modern digital systems, and they strongly impact the overall power, performance, and area. To promote memory-related research in academia, this dissertation introduces OpenRAM, a flexible, portable and open-source memory compiler and characterization methodology for generating and verifying memory designs across different technologies.In addition, SRAM designs, focusing on improving power consumption, access time and bitcell stability are explored in high variability advanced CMOS technologies. To have a stable read/write operation for SRAM in high variability process nodes, a differential-ended single-port 8T bitcell is proposed that improves the read noise margin, write noise margin and readout bitcell current by 45%, 48% and 21%, respectively, compared to a conventional 6T bitcell. Also, a differential-ended single-port 12T bitcell for subthreshold operation is proposed that solves the half-select disturbance and allows efficient bit-interleaving. 12T bitcell has a leakage control mechanism which helps to reduce the power consumption and provides operation down to 0.3 V. Both 8T and 12T bitcells are analyzed in a 64 kb SRAM array using 32 nm technology. Besides, to further improve the access time and power consumption, two tracking circuits (multi replica bitline delay and reconfigurable replica bitline delay techniques) are proposed to aid the generation of accurate and optimum sense amplifier set time.An error tolerant SRAM architecture suitable for low voltage video application with dynamic power-quality management is also proposed in this dissertation. This memory uses three power supplies to improve the SRAM stability in low voltages. The proposed triple-supply approach achieves 63% improvement in image quality and 69% reduction in power consumption compared to a single-supply 64 kb SRAM array at 0.70 V

Application-Specific SRAM Design Using Output Prediction to Reduce Bit-Line Switching Activity and Statistically Gated Sense Amplifiers for Up to 1.9x Lower Energy/Access

This paper presents an application-specific SRAM design targeted towards applications with highly correlated data (e.g., video and imaging applications). A prediction-based reduced bit-line switching activity scheme is proposed to reduce switching activity on the bit-lines based on the proposed bit-cell and array structure. A statistically gated sense-amplifier approach is used to exploit signal statistics on the bit-lines to reduce energy consumption of the sensing network. These techniques provide up to 1.9 × lower energy/access when compared with an 8T SRAM. These savings are in addition to the savings that are achieved through voltage scaling and demonstrate the advantages of an application-specific SRAM design.Texas Instruments Incorporate