207 research outputs found

    Millimetre-Wave Fibre-Wireless Technologies for 5G Mobile Fronthaul

    Get PDF
    The unprecedented growth in mobile data traffic, driven primarily by bandwidth rich applications and high definition video is accelerating the development of fifth generation (5G) mobile network. As mobile access network evolves towards centralisation, mobile fronthaul (MFH) architecture becomes essential in providing high capacity, ubiquitous and yet affordable services to subscribers. In order to meet the demand for high data rates in the access, Millimetre-wave (mmWave) has been highlighted as an essential technology in the development of 5G-new radio (5G-NR). In the present MFH architecture which is typically based on common public radio interface (CPRI) protocol, baseband signals are digitised before fibre transmission, featuring high overhead data and stringent synchronisation requirements. A direct application of mmWave 5G-NR to CPRI digital MFH, where signal bandwidth is expected to be up to 1GHz will be challenging, due to the increased complexity of the digitising interface and huge overhead data that will be required for such bandwidth. Alternatively, radio over fibre (RoF) technique can be employed in the transportation of mmWave wireless signals via the MFH link, thereby avoiding the expensive digitisation interface and excessive overhead associated with its implementation. Additionally, mmWave carrier can be realised with the aid of photonic components employed in the RoF link, further reducing the system complexity. However, noise and nonlinearities inherent to analog transmission presents implementation challenges, limiting the system dynamic range. Therefore, it is important to investigate the effects of these impairments in RoF based MFH architecture. This thesis presents extensive research on the impact of noise and nonlinearities on 5G candidate waveforms, in mmWave 5G fibre wireless MFH. Besides orthogonal frequency division multiplexing (OFDM), another radio access technology (RAT) that has received significant attention is filter bank multicarrier (FBMC), particularly due to its high spectral containment and excellent performance in asynchronous transmission. Hence, FBMC waveform is adopted in this work to study the impact of noise and nonlinearities on the mmWave fibre-wireless MFH architecture. Since OFDM is widely deployed and it has been adopted for 5G-NR, the performance of OFDM and FBMC based 5G mmWave RAT in fibre wireless MFH architecture is compared for several implementations and transmission scenarios. To this extent, an end to end transmission testbed is designed and implemented using industry standard VPI Transmission Maker® to investigate five mmWave upconversion techniques. Simulation results show that the impact of noise is higher in FBMC when the signal to-noise (SNR) is low, however, FBMC exhibits better performance compared to OFDM as the SNR improved. More importantly, an evaluation of the contribution of each noise component to the overall system SNR is carried out. It is observed in the investigation that noise contribution from the optical carriers employed in the heterodyne upconversion of intermediate frequency (IF) signals to mmWave frequency dominate the system noise. An adaptive modulation technique is employed to optimise the system throughput based on the received SNR. The throughput of FBMC based system reduced significantly compared to OFDM, due to laser phase noise and chromatic dispersion (CD). Additionally, it is shown that by employing frequency domain averaging technique to enhance the channel estimation (CE), the throughput of FBMC is significantly increased and consequently, a comparable performance is obtained for both waveforms. Furthermore, several coexistence scenarios for multi service transmission are studied, considering OFDM and FBMC based RATs to evaluate the impact inter band interference (IBI), due to power amplifier (PA) nonlinearity on the system performance. The low out of band (OOB) emission in FBMC plays an important role in minimising IBI to adjacent services. Therefore, FBMC requires less guardband in coexistence with multiple services in 5G fibre-wireless MFH. Conversely, OFDM introduced significant OOB to adjacent services requiring large guardband in multi-service coexistence transmission scenario. Finally, a novel transmission scheme is proposed and investigated to simultaneously generate multiple mmWave signals using laser heterodyning mmWave upconversion technique. With appropriate IF and optical frequency plan, several mmWave signals can be realised. Simulation results demonstrate successful simultaneous realisation of 28GHz, 38GHz, and 60GHz mmWave signals

    PAPR Reduction Solutions for 5G and Beyond

    Get PDF
    The latest fifth generation (5G) wireless technology provides improved communication quality compared to earlier generations. The 5G New Radio (NR), specified by the 3rd Generation Partnership Project (3GPP), addresses the modern requirements of the wireless networks and targets improved communication quality in terms of for example peak data rates, latency and reliability. On the other hand, there are still various crucial issues that impact the implementation and energy-efficiency of 5G NR networks and their different deployments. The power-efficiency of transmitter power amplifiers (PAs) is one of these issues. The PA is an important unit of a communication system, which is responsible from amplifying the transmit signal towards the antenna. Reaching high PA power-efficiency is known to be difficult when the transmit waveform has a high peak-to-average power ratio (PAPR). The cyclic prefix (CP)-orthogonal frequencydivision multiplexing (OFDM) that is the main physical-layer waveform of 5G NR, suffers from such high PAPR challenge. There are generally many PAPR reduction methods proposed in the literature, however, many of these have either very notable computational complexity or impose substantial inband distortion. Moreover, 5G NR has new features that require redesigning the PAPR reduction methods. In line with these, the first contribution of this thesis is the novel frequencyselective PAPR reduction concept, where clipping noise is shaped in a frequencyselective manner over the active passband. This concept is in line with the 5G NR, where aggressive frequency-domain multiplexing is considered as an important feature. Utilizing the frequency-selective PAPR reduction enables the realization of the heterogeneous resource utilization within one passband. The second contribution of this thesis is the frequency-selective single-numerology (SN) and mixed-numerology (MN) PAPR reduction methods. The 5G NR targets utilizing different physical resource blocks (PRBs) and bandwidth parts (BWPs) within one passband flexibly. Yet, existing PAPR reduction methods do not exploit these features. Based on this, novel algorithms utilizing PRB and BWP level control of clipping noise are designed to meet error vector magnitude (EVM) limits of the modulations while reducing the PAPR. TheMNallocation has one critical challenge as inter numerology interference (INI) emerges after aggregation of subband signals. Proposed MN PAPR reduction algorithm overcomes this issue by cancelling INI within the PAPR reduction loop, which has not been considered earlier. The third contribution of this thesis is the proposal of two novel non-iterative PAPR reduction methods. First method utilizes the fast-convolution filteredOFDM (FC-F-OFDM) that has excellent spectral containment, and combines it with clipping. Moreover, clipping noise is also allocated to guard bands by filter passband extension (FPE) and clipping noise in out-of-band (OOB) regions is essentially filtered through FC filtering. The second method is the guard-tone reservation (GTR) which is applied to discrete Fourier transform-spread-OFDM (DFT-s-OFDM). Uniquely, GTR estimates the time domain peaks in data symbol domain before inverse fast Fourier transform (IFFT), and uses guard band tones for PAPR reduction. The fourth contribution of the thesis is the design of two novel machine learning (ML) algorithms that improve the drawbacks of frequency-selective PAPRreduction. The first ML algorithm, PAPRer, models the nonlinear relation between the PAPR target and the realized PAPR value. Then, it auto-tunes the optimal PAPR target and this way minimizes the realized PAPR. The second ML algorithm, one-shot clipping-and-filtering (OSCF), solves the complexity problem of iterative clipping and filtering (ICF)-like methods by generating proper approximated clipping noise signal after running only one iteration, leading to very efficient PAPR reduction. Finally, an over-arching contribution of this thesis is the experimental validation of the performance benefits of the proposed methods by considering realistic 5GNR uplink (UL) and downlink (DL) testbeds that include realistic PAs and associated hardware. It is very important to confirm the practical benefits of the proposed methods and, this is realized with the conducted experimental work

    Peak to average power ratio reduction and error control in MIMO-OFDM HARQ System

    Get PDF
    Currently, multiple-input multiple-output orthogonal frequency division multiplexing (MIMOOFDM) systems underlie crucial wireless communication systems such as commercial 4G and 5G networks, tactical communication, and interoperable Public Safety communications. However, one drawback arising from OFDM modulation is its resulting high peak-to-average power ratio (PAPR). This problem increases with an increase in the number of transmit antennas. In this work, a new hybrid PAPR reduction technique is proposed for space-time block coding (STBC) MIMO-OFDM systems that combine the coding capabilities to PAPR reduction methods, while leveraging the new degree of freedom provided by the presence of multiple transmit chairs (MIMO). In the first part, we presented an extensive literature review of PAPR reduction techniques for OFDM and MIMO-OFDM systems. The work developed a PAPR reduction technique taxonomy, and analyzed the motivations for reducing the PAPR in current communication systems, emphasizing two important motivations such as power savings and coverage gain. In the tax onomy presented here, we include a new category, namely, hybrid techniques. Additionally, we drew a conclusion regarding the importance of hybrid PAPR reduction techniques. In the second part, we studied the effect of forward error correction (FEC) codes on the PAPR for the coded OFDM (COFDM) system. We simulated and compared the CCDF of the PAPR and its relationship with the autocorrelation of the COFDM signal before the inverse fast Fourier transform (IFFT) block. This allows to conclude on the main characteristics of the codes that generate high peaks in the COFDM signal, and therefore, the optimal parameters in order to reduce PAPR. We emphasize our study in FEC codes as linear block codes, and convolutional codes. Finally, we proposed a new hybrid PAPR reduction technique for an STBC MIMO-OFDM system, in which the convolutional code is optimized to avoid PAPR degradation, which also combines successive suboptimal cross-antenna rotation and inversion (SS-CARI) and iterative modified companding and filtering schemes. The new method permits to obtain a significant net gain for the system, i.e., considerable PAPR reduction, bit error rate (BER) gain as compared to the basic MIMO-OFDM system, low complexity, and reduced spectral splatter. The new hybrid technique was extensively evaluated by simulation, and the complementary cumulative distribution function (CCDF), the BER, and the power spectral density (PSD) were compared to the original STBC MIMO-OFDM signal

    Uplink data measurement and analysis for 5G eCPRI radio unit

    Get PDF
    Abstract. The new 5G mobile network generation aims to enhance the performance of the cellular network in almost every possible aspect, offering higher data rates, lower latencies, and massive number of network connections. Arguably the most important change from LTE are the new RU-BBU split options for 5G promoted by 3GPP and other organizations. Another big conceptual shift introduced with 5G is the open RAN concept, pushed forward by organizations such as the O-RAN alliance. O-RAN aims to standardize the interfaces between different RAN elements in a way that promotes vendor interoperability and lowers the entry barrier for new equipment suppliers. Moreover, the 7-2x split option standardized by O-RAN has risen as the most important option within the different low layer split options. As the fronthaul interface, O-RAN has selected the packet-based eCPRI protocol, which has been designed to be more flexible and dynamic in terms of transport network and data-rates compared to its predecessor CPRI. Due to being a new interface, tools to analyse data from this interface are lacking. In this thesis, a new, Python-based data analysis tool for UL eCPRI data was created for data quality validation purposes from any O-RAN 7-2x functional split based 5G eCPRI radio unit. The main goal for this was to provide concrete KPIs from captured data, including timing offset, signal power level and error vector magnitude. The tool produces visual and text-based outputs that can be used in both manual and automated testing. The tool has enhanced eCPRI UL datapath testing in radio unit integration teams by providing actual quality metrics and enabling test automation.Uplink datamittaukset ja -analyysi 5G eCPRI radiolla. Tiivistelmä. Uusi 5G mobiiliverkkogeneraatio tuo mukanaan parannuksia lähes kaikkiin mobiiliverkon ominaisuuksiin, tarjoten nopeamman datasiirron, pienemmät viiveet ja valtavat laiteverkostot. Luultavasti tärkein muutos LTE teknologiasta ovat 3GPP:n ja muiden organisaatioiden ehdottamat uudet radion ja systeemimoduulin väliset funktionaaliset jakovaihtoehdot. Toinen huomattava muutos 5G:ssä on O-RAN:in ajama avoimen RAN:in konsepti, jonka tarkoituksena on standardisoida verkkolaitteiden väliset rajapinnat niin, että RAN voidaan rakentaa eri valmistajien laitteista, laskien uusien laitevalmistajien kynnystä astua verkkolaitemarkkinoille. O-RAN:n standardisoima 7-2x funktionaalinen jako on noussut tärkeimmäksi alemman tason jakovaihtoehdoista. Fronthaul rajapinnan protokollaksi O-RAN on valinnut pakettitiedonsiirtoon perustuvan eCPRI:n, joka on suunniteltu dynaamisemmaksi ja joustavammaksi datanopeuksien ja lähetysverkon suhteen kuin edeltävä CPRI protokolla. Uutena protokollana, eCPRI rajapinnalle soveltuvia data-analyysityökaluja ei ole juurikaan saatavilla. Tässä työssä luotiin uusi pythonpohjainen data-analyysityökalu UL suunnan eCPRI datalle, jotta datan laatu voidaan määrittää millä tahansa O-RAN 7-2x funktionaaliseen jakoon perustuvalla 5G eCPRI radiolla. Työkalun päätarkoitus on analysoida ja kuvata datan laatua laskemalla datan ajoitusoffsettia, tehotasoa, sekä EVM:ää. Työkalu tuottaa tulokset visuaalisena ja tekstipohjaisena, jotta analyysia voidaan tehdä niin manuaalisessa kuin automaattisessa testauksessa. Työkalun käyttöönotto on tehostanut UL suunnan dataputken testausta radio-integrointitiimeissä, tarjoten datan laatua kuvaavaa metriikkaa sekä mahdollistaen testauksen automatisoinnin

    Crest factor reduction techniques for OFDM telecommunication systems

    Get PDF
    Two popular Crest Factor Reduction techniques applicable to OFDM signals have been studied and implemented within this project. To provide adequate background, a brief description of OFDM communication systems is included in the first sections, and the problem of high Peak to Average Power Ratio in multi-carrier transmission schemes is presented. An overview of the most relevant Crest Factor Reduction techniques is performed, and the Clipping and Filtering and Peak Windowing algorithms are selected as implementation candidates due to their protocol agnostic nature. Several implementation architectures have been discussed, and the most computationally efficient one has been used to implement both algorithms within srsRAN, an open source, full software radio implementation of an LTE network with all of its components. In order to provide a comprehensive evaluation of the developed algorithms, an extensive measurement campaign has been designed and carried out, comprised of synthetic testing, as well as experimental physical signal measurements in a laboratory setting, and an outdoor measurement campaign. To speed up the measurement process, an automated measurement system has been designed in MATLAB, which remotely operates a signal analyser to perform spectrum and statistical power measurements, as well as IQ sample collection of the generated LTE signals. This measurement system has been used to carry out unwanted emissions tests following the LTE conformance testing procedures, which are also discussed within this document. For the outdoor measurements, an LTE single cell network has been deployed using a software radio transceiver and an LTE phone, with the aim of assessing the end to end quality of service improvements provided by the developed algorithms. The gathered results illustrate that the implemented Crest Factor Reduction techniques can provide significant network performance gains in situations with limited available transmission power. Additional gains provided by these techniques include increased efficiency in the operation of power amplification stages, and reduced network deployment costs.Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructur

    Experimental Evaluation of Transmitted Signal Distortion Caused by Power Allocation in Inter-Cell Interference Coordination Techniques for LTE/LTE-A and 5G Systems

    Get PDF
    Error vector magnitude (EVM) and out-of-band emissions are key metrics for evaluating in-band and out-band distortions introduced by all potential non-idealities in the transmitters of wireless systems. As EVM is a measure of the quality of the modulated signal/symbols, LTE/LTE-A and 5G systems specify mandatory EVM requirements in transmission for each modulation scheme. This paper analyzes the influence of the mandatory satisfaction of EVM requirements on the design of radio resource management strategies (RRM) (link adaptation, inter-cell interference coordination), specifically in the downlink (DL). EVM depends on the non-idealities of the transmitter implementations, on the allocated power variations between the subcarriers and on the selected modulations. In the DL of LTE, link adaptation is usually executed by adaptive modulation and coding (AMC) instead of power control, but some flexibility in power allocation remains being used. LTE specifies some limits in the power dynamic ranges depending on the allocated modulation, which ensures the satisfaction of EVM requirements. However, the required recommendations concerning the allowed power dynamic range when inter-cell interference coordination (ICIC) and enhanced ICIC (eICIC) mechanisms (through power coordination) are out of specification, even though the EVM performance should be known to obtain the maximum benefit of these strategies. We perform an experimental characterization of the EVM in the DL under real and widely known ICIC implementation schemes. These studies demonstrate that an accurate analysis of EVM is required. It allows a better adjustment of the design parameters of these strategies, and also allows the redefinition of the main criteria to be considered in the implementation of the scheduler/link adaptation concerning the allocable modulation coding scheme (MCS) in each resource block. © 2013 IEEE
    corecore