Quadrature Phase-Domain ADPLL with Integrated On-line Amplitude Locked Loop Calibration for 5G Multi-band Applications

5th generation wireless systems (5G) have expanded frequency band coverage with the low-band 5G and mid-band 5G frequencies spanning 600 MHz to 4 GHz spectrum. This dissertation focuses on a microelectronic implementation of CMOS 65 nm design of an All-Digital Phase Lock Loop (ADPLL), which is a critical component for advanced 5G wireless transceivers. The ADPLL is designed to operate in the frequency bands of 600MHz-930MHz, 2.4GHz-2.8GHz and 3.4GHz-4.2GHz. Unique ADPLL sub-components include: 1) Digital Phase Frequency Detector, 2) Digital Loop Filter, 3) Channel Bank Select Circuit, and 4) Digital Control Oscillator. Integrated with the ADPLL is a 90-degree active RC-CR phase shifter with on-line amplitude locked loop (ALL) calibration to facilitate enhanced image rejection while mitigating the effects of fabrication process variations and component mismatch. A unique high-sensitivity high-speed dynamic voltage comparator is included as a key component of the active phase shifter/ALL calibration subsystem. 65nm CMOS technology circuit designs are included for the ADPLL and active phase shifter with simulation performance assessments. Phase noise results for 1 MHz offset with carrier frequencies of 600MHz, 2.4GHz, and 3.8GHz are -130, -122, and -116 dBc/Hz, respectively. Monte Carlo simulations to account for process variations/component mismatch show that the active phase shifter with ALL calibration maintains accurate quadrature phase outputs when operating within the frequency bands 600MHz-930MHz, 2.4GHz-2.8GHz and 3.4GHz-4.2GHz

Study to investigate and evaluate means of optimizing the Ku-band communication function for the space shuttle

The forward link of the overall Ku-band communication system consists of the ground- TDRS-orbiter communication path. Because the last segment of the link is directed towards a relatively low orbiting shuttle, a PN code is used to reduce the spectral density. A method is presented for incorporating code acquisition and tracking functions into the orbiter's Ku-band receiver. Optimization of a three channel multiplexing technique is described. The importance of Costas loop parameters to provide false lock immunity for the receiver, and the advantage of using a sinusoidal subcarrier waveform, rather than square wave, are discussed

Hardware simulation of Ku-band spacecraft receiver and bit synchronizer, volume 1

A hardware simulation which emulates an automatically acquiring transmit receive spread spectrum communication and tracking system and developed for use in future NASA programs involving digital communications is considered. The system architecture and tradeoff analysis that led to the selection of the system to be simulated is presented

Implementation of Time-Delay Interferometry for LISA

We discuss the baseline optical configuration for the Laser Interferometer Space Antenna (LISA) mission, in which the lasers are not free-running, but rather one of them is used as the main frequency reference generator (the {\it master}) and the remaining five as {\it slaves}, these being phase-locked to the master (the {\it master-slave configuration}). Under the condition that the frequency fluctuations due to the optical transponders can be made negligible with respect to the secondary LISA noise sources (mainly proof-mass and shot noises), we show that the entire space of interferometric combinations LISA can generate when operated with six independent lasers (the {\it one-way method}) can also be constructed with the {\it master-slave} system design. The corresponding hardware trade-off analysis for these two optical designs is presented, which indicates that the two sets of systems needed for implementing the {\it one-way method}, and the {\it master-slave configuration}, are essentially identical. Either operational mode could therefore be implemented without major implications on the hardware configuration. We then.......Comment: 39 pages, 6 figures, 2 table

Phasemeter core for intersatellite laser heterodyne interferometry: modelling, simulations and experiments

Inter satellite laser interferometry is a central component of future space-borne gravity instruments like LISA, eLISA, NGO and future geodesy missions. The inherently small laser wavelength allows to measure distance variations with extremely high precision by interfering a reference beam with a measurement beam. The readout of such interferometers is often based on tracking phasemeters, able to measure the phase of an incoming beatnote with high precision over a wide range of frequencies. The implementation of such phasemeters is based on all digital phase-locked loops, hosted in FPGAs. Here we present a precise model of an all digital phase locked loop that allows to design such a readout algorithm and we support our analysis by numerical performance measurements and experiments with analog signals.Comment: 17 pages, 6 figures, accepted for publication in CQ

A 24-GHz SiGe Phased-Array Receiver—LO Phase-Shifting Approach

A local-oscillator phase-shifting approach is introduced to implement a fully integrated 24-GHz phased-array receiver using an SiGe technology. Sixteen phases of the local oscillator are generated in one oscillator core, resulting in a raw beam-forming accuracy of 4 bits. These phases are distributed to all eight receiving paths of the array by a symmetric network. The appropriate phase for each path is selected using high-frequency analog multiplexers. The raw beam-steering resolution of the array is better than 10 [degrees] for a forward-looking angle, while the array spatial selectivity, without any amplitude correction, is better than 20 dB. The overall gain of the array is 61 dB, while the array improves the input signal-to-noise ratio by 9 dB

Fiber-optic delay-line stabilization of heterodyne optical signal generator and method using same

The present invention is a laser heterodyne frequency generator system with a stabilizer for use in the microwave and millimeter-wave frequency ranges utilizing a photonic mixer as a photonic phase detector in a stable optical fiber delay-line. Phase and frequency fluctuations of the heterodyne laser signal generators are stabilized at microwave and millimeter wave frequencies by a delay line system operating as a frequency discriminator. The present invention is free from amplifier and mixer 1/.function. noise at microwave and millimeter-wave frequencies that typically limit phase noise performance in electronic cavity stabilized electronic oscillators. Thus, 1/.function. noise due to conventional mixers is eliminated and stable optical heterodyne generation of electrical signals is achieved

Wide-band channel sounding in the bands above 2GHz

Modem telecommunication services require increasing data rates for both mobile and fixed applications. At frequencies in the range 2.5 GHz to 6 GHz physical constraints on the size of equipment result in antenna with moderate directivity typically with an antenna beam width of 20 degrees or greater. Thus building and ground clutter is present within the first Fresnel zones of the antenna system which gives rise to multi-path propagation. This multi-path propagation (average delay and RMS delay spread) has been investigated using a wideband FMCW channel sounder that is capable of operation at a number of frequencies. The channel sounder has been based upon a parallel architecture sounder operating within the 2 GHz band with a number of frequency conversion modules to translate operation to the new frequency bands under study. Two primary configurations have been explored. In the first of these, propagation has been measured simultaneously within the 2.5 GHz, 3.4 GHz and 5.7 GHz bands. This is believed to be novel and original. In the second configuration four parallel channels operating within the 5.7 GHz band may be operated simultaneously. This configuration supports multiple antennas at the receiver. To support the work in the bands from 2.5 GHz to 6 GHz wideband discone antenna have been designed and fabricated. A system to provide relative gain and phase calibration for up to four antennas has been developed and demonstrated. This is also believed to represent a novel method of performing antenna and array calibration. Finally, the frequency converters have been used in conjunction with additional components to provide an FMCพ sounder operating within the 60 GHz Oxygen absorption band. This work is novel in that up to 1 GHz of spectrum can be swept. To support this work a significant number of microwave components have been designed and developed. In particular a novel wide band balanced X3 multiplier and a novel impedance-matched amplitude-equaliser (to provide amplifier gain-slope equalisation) has been developed. Channel soundings have been performed at three frequencies simultaneously using band specific and common antenna. The average delay and RMS delay spread have been demonstrated to be essentially frequency independent for the environments evaluated

고속 DRAM 인터페이스를 위한 전압 및 온도에 둔감한 클록 패스와 위상 오류 교정기 설계

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2021. 2. 정덕균.To cope with problems caused by the high-speed operation of the dynamic random access memory (DRAM) interface, several approaches are proposed that are focused on the clock path of the DRAM. Two delay-locked loop (DLL) based schemes, a forwarded-clock (FC) receiver (RX) with self-tracking loop and a quadrature error corrector, are proposed. Moreover, an open-loop based scheme is presented for drift compensation in the clock distribution. The open-loop scheme consumes less power consumption and reduces design complexity. The FC RX uses DLLs to compensate for voltage and temperature (VT) drift in unmatched memory interfaces. The self-tracking loop consists of two-stage cascaded DLLs to operate in a DRAM environment. With the write training and the proposed DLL, the timing relationship between the data and the sampling clock is always optimal. The proposed scheme compensates for delay drift without relying on data transitions or re-training. The proposed FC RX is fabricated in 65-nm CMOS process and has an active area containing 4 data lanes of 0.0329 mm2. After the write training is completed at the supply voltage of 1 V, the measured timing margin remains larger than 0.31-unit interval (UI) when the supply voltage drifts in the range of 0.94 V and 1.06 V from the training voltage, 1 V. At the data rate of 6.4 Gb/s, the proposed FC RX achieves an energy efficiency of 0.45 pJ/bit. Contrary to the aforementioned scheme, an open-loop-based voltage drift compensation method is proposed to minimize power consumption and occupied area. The overall clock distribution is composed of a current mode logic (CML) path and a CMOS path. In the proposed scheme, the architecture of the CML-to-CMOS converter (C2C) and the inverter is changed to compensate for supply voltage drift. The bias generator provides bias voltages to the C2C and inverters according to supply voltage for delay adjustment. The proposed clock tree is fabricated in 40 nm CMOS process and the active area is 0.004 mm2. When the supply voltage is modulated by a sinusoidal wave with 1 MHz, 100 mV peak-to-peak swing from the center of 1.1 V, applying the proposed scheme reduces the measured root-mean-square (RMS) jitter from 3.77 psRMS to 1.61 psRMS. At 6 GHz output clock, the power consumption of the proposed scheme is 11.02 mW. A DLL-based quadrature error corrector (QEC) with a wide correction range is proposed for the DRAM whose clocks are distributed over several millimeters. The quadrature error is corrected by adjusting delay lines using information from the phase error detector. The proposed error correction method minimizes increased jitter due to phase error correction by setting at least one of the delay lines in the quadrature clock path to the minimum delay. In addition, the asynchronous calibration on-off scheme reduces power consumption after calibration is complete. The proposed QEC is fabricated in 40 nm CMOS process and has an active area of 0.048 mm2. The proposed QEC exhibits a wide correctable error range of 101.6 ps and the remaining phase errors are less than 2.18° from 0.8 GHz to 2.3 GHz clock. At 2.3 GHz, the QEC contributes 0.53 psRMS jitter. Also, at 2.3 GHz, the power consumption is reduced from 8.89 mW to 3.39 mW when the calibration is off.본 논문에서는 동적 랜덤 액세스 메모리 (DRAM)의 속도가 증가함에 따라 클록 패스에서 발생할 수 있는 문제에 대처하기 위한 세 가지 회로들을 제안하였다. 제안한 회로들 중 두 방식들은 지연동기루프 (delay-locked loop) 방식을 사용하였고 나머지 한 방식은 면적과 전력 소모를 줄이기 위해 오픈 루프 방식을 사용하였다. DRAM의 비정합 수신기 구조에서 데이터 패스와 클록 패스 간의 지연 불일치로 인해 전압 및 온도 변화에 따라 셋업 타임 및 홀드 타임이 줄어드는 문제를 해결하기 위해 지연동기루프를 사용하였다. 제안한 지연동기루프 회로는 DRAM 환경에서 동작하도록 두 개의 지연동기루프로 나누었다. 또한 초기 쓰기 훈련을 통해 데이터와 클록을 타이밍 마진 관점에서 최적의 위치에 둘 수 있다. 따라서 제안하는 방식은 데이터 천이 정보가 필요하지 않다. 65-nm CMOS 공정을 이용하여 만들어진 칩은 6.4 Gb/s에서 0.45 pJ/bit의 에너지 효율을 가진다. 또한 1 V에서 쓰기 훈련 및 지연동기루프를 고정시키고 0.94 V에서 1.06 V까지 공급 전압이 바뀌었을 때 타이밍 마진은 0.31 UI보다 큰 값을 유지하였다. 다음으로 제안하는 회로는 클록 분포 트리에서 전압 변화로 인해 클록 패스의 지연이 달라지는 것을 앞서 제시한 방식과 달리 오픈 루프 방식으로 보상하였다. 기존 클록 패스의 인버터와 CML-to-CMOS 변환기의 구조를 변경하여 바이어스 생성 회로에서 생성한 공급 전압에 따라 바뀌는 바이어스 전압을 가지고 지연을 조절할 수 있게 하였다. 40-nm CMOS 공정을 이용하여 만들어진 칩의 6 GHz 클록에서의 전력 소모는 11.02 mW로 측정되었다. 1.1 V 중심으로 1 MHz, 100 mV 피크 투 피크를 가지는 사인파 성분으로 공급 전압을 변조하였을 때 제안한 방식에서의 지터는 기존 방식의 3.77 psRMS에서 1.61 psRMS로 줄어들었다. DRAM의 송신기 구조에서 다중 위상 클록 간의 위상 오차는 송신된 데이터의 데이터 유효 창을 감소시킨다. 이를 해결하기 위해 지연동기루프를 도입하게 되면 증가된 지연으로 인해 위상이 교정된 클록에서 지터가 증가한다. 본 논문에서는 증가된 지터를 최소화하기 위해 위상 교정으로 인해 증가된 지연을 최소화하는 위상 교정 회로를 제시하였다. 또한 유휴 상태에서 전력 소모를 줄이기 위해 위상 오차를 교정하는 회로를 입력 클록과 비동기식으로 끌 수 있는 방법 또한 제안하였다. 40-nm CMOS 공정을 이용하여 만들어진 칩의 위상 교정 범위는 101.6 ps이고 0.8 GHz 부터 2.3 GHz까지의 동작 주파수 범위에서 위상 교정기의 출력 클록의 위상 오차는 2.18°보다 작다. 제안하는 위상 교정 회로로 인해 추가된 지터는 2.3 GHz에서 0.53 psRMS이고 교정 회로를 껐을 때 전력 소모는 교정 회로가 켜졌을 때인 8.89 mW에서 3.39 mW로 줄어들었다.Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Thesis Organization 4 Chapter 2 Background on DRAM Interface 5 2.1 Overview 5 2.2 Memory Interface 7 Chapter 3 Background on DLL 11 3.1 Overview 11 3.2 Building Blocks 15 3.2.1 Delay Line 15 3.2.2 Phase Detector 17 3.2.3 Charge Pump 19 3.2.4 Loop filter 20 Chapter 4 Forwarded-Clock Receiver with DLL-based Self-tracking Loop for Unmatched Memory Interfaces 21 4.1 Overview 21 4.2 Proposed Separated DLL 25 4.2.1 Operation of the Proposed Separated DLL 27 4.2.2 Operation of the Digital Loop Filter in DLL 31 4.3 Circuit Implementation 33 4.4 Measurement Results 37 4.4.1 Measurement Setup and Sequence 38 4.4.2 VT Drift Measurement and Simulation 40 Chapter 5 Open-loop-based Voltage Drift Compensation in Clock Distribution 46 5.1 Overview 46 5.2 Prior Works 50 5.3 Voltage Drift Compensation Method 52 5.4 Circuit Implementation 57 5.5 Measurement Results 61 Chapter 6 Quadrature Error Corrector with Minimum Total Delay Tracking 68 6.1 Overview 68 6.2 Prior Works 70 6.3 Quadrature Error Correction Method 73 6.4 Circuit Implementation 82 6.5 Measurement Results 88 Chapter 7 Conclusion 96 Bibliography 98 초록 102Docto