X-ray photoelectron spectroscopy investigation of nanoporous NiO electrodes sensitized with Erythrosine B

Nanoporous NiO thin films were prepared onto FTO glass substrates by means of screen-printing and were sensitized with Erythrosine B (EryB) dye. The obtained material was electrochemically treated and characterized with ex-situ X-ray photoelectron spectroscopy in order to gain information beneficial to the application of sensitized NiO as photocathodes of p-type dye-sensitized solar cells (p-DSCs). In particular, EryB-sensitized NiO films underwent a series of electrochemical treatments in LiClO4/Acetonitrile (ACN) electrolyte devised so as to simulate possible conditions the electrode might encounter during operation in the photoelectrochemical cell. Upon potential-cycling in a range where the two NiO faradic events Ni(II)→Ni(III) and Ni(III)→Ni(IV) occur, X-ray photoelectron spectroscopy revealed that Erythrosine B dye experiences a partial detachment from the NiO surface. This detachment seems to be paralleled by the formation of stable (Ni)+(ClO4)- couples. Overall, the EryB dye displayed an acceptable electrochemical stability onto the surface of NiO electrode up to 50 cyclic voltammetries in the range -0.27÷+1.13V vs. Ag/AgCl. These results are useful for the evaluation of electrochemical stability of the dye when this is immobilized onto an electrode surface and are beneficial for a better comprehension of the degradation phenomena operating in real photoconversion device. © 2017 Elsevier B.V

Shaping Giant Membrane Vesicles in 3D-Printed Protein Hydrogel Cages

Giant unilamellar phospholipid vesicles are attractive starting points for constructing minimal living cells from the bottom-up. Their membranes are compatible with many physiologically functional modules and act as selective barriers, while retaining a high morphological flexibility. However, their spherical shape renders them rather inappropriate to study phenomena that are based on distinct cell shape and polarity, such as cell division. Here, a microscale device based on 3D printed protein hydrogel is introduced to induce pH-stimulated reversible shape changes in trapped vesicles without compromising their free-standing membranes. Deformations of spheres to at least twice their aspect ratio, but also toward unusual quadratic or triangular shapes can be accomplished. Mechanical force induced by the cages to phase-separated membrane vesicles can lead to spontaneous shape deformations, from the recurrent formation of dumbbells with curved necks between domains to full budding of membrane domains as separate vesicles. Moreover, shape-tunable vesicles are particularly desirable when reconstituting geometry-sensitive protein networks, such as reaction-diffusion systems. In particular, vesicle shape changes allow to switch between different modes of self-organized protein oscillations within, and thus, to influence reaction networks directly by external mechanical cues

Apollo-Soyuz pamphlet no. 3: Sun, stars, in between

The structure of the sun and its surface temperature and brightness are discussed as background for explaining the ASTP joint experiment to photograph the solar corona from Soyuz while the Apollo spacecraft created an artificial eclipse by blocking out the sun. Stellar spectra, stellar evolution, and the Milky Way galaxy are explored in relation to the MA-083 experiment to survey the sky for extreme ultraviolet sources and background radiation. Interstellar gas and the spectrum of helium are discussed in relation to the MA-088 experiment designed to detect interstellar helium entering the solar system and to measure its density and motion

Apollo-Soyuz pamphlet no. 2: X-rays, gamma-rays

The nature of high energy radiation and its penetration through earth's atmosphere is examined with emphasis on X-rays, gamma rays, and cosmic radiation and the instruments used in their detection. The history of radio astronomy and the capabilities of the Uhuru satellite are summarized. The ASTP soft X-ray experiment (MA-048) designed to study the spectra in the range from 0.1 to 10 keV and survey the background over a large section of the sky is described, as well as the determination of SMC C-1 as an X-ray pulsar. The crystal activation experiment (MA-151) used to measure the radioactive isotopes created by cosmic rays in crystals used for gamma ray detectors is also discussed

Calculation of accurate permanent dipole moments of the lowest 1,3Σ+^{1,3} \Sigma^+ states of heteronuclear alkali dimers using extended basis sets

The obtention of ultracold samples of dipolar molecules is a current challenge which requires an accurate knowledge of their electronic properties to guide the ongoing experiments. In this paper, we systematically investigate the ground state and the lowest triplet state of mixed alkali dimers (involving Li, Na, K, Rb, Cs) using a standard quantum chemistry approach based on pseudopotentials for atomic core representation, gaussian basis sets, and effective terms for core polarization effects. We emphasize on the convergence of the results for permanent dipole moments regarding the size of the gaussian basis set, and we discuss their predicted accuracy by comparing to other theoretical calculations or available experimental values. We also revisit the difficulty to compare computed potential curves among published papers, due to the differences in the modelization of core-core interaction.Comment: accepted to J. Chem. Phy

30 inch Roll-Based Production of High-Quality Graphene Films for Flexible Transparent Electrodes

We report that 30-inch scale multiple roll-to-roll transfer and wet chemical doping considerably enhance the electrical properties of the graphene films grown on roll-type Cu substrates by chemical vapor deposition. The resulting graphene films shows a sheet resistance as low as ~30 Ohm/sq at ~90 % transparency which is superior to commercial transparent electrodes such as indium tin oxides (ITO). The monolayer of graphene shows sheet resistances as low as ~125 Ohm/sq with 97.4% optical transmittance and half-integer quantum Hall effect, indicating the high-quality of these graphene films. As a practical application, we also fabricated a touch screen panel device based on the graphene transparent electrodes, showing extraordinary mechanical and electrical performances

Bio-Inspired Active Skins for Surface Morphing.

Mechanical metamaterials that leverage precise geometrical designs and imperfections to induce unique material behavior have garnered significant attention. This study proposes a Bio-Inspired Active Skin (BIAS) as a new class of instability-induced morphable structures, where selective out-of-plane material deformations can be pre-programmed during design and activated by in-plane strains. The deformation mechanism of a unit cell geometrical design is analyzed to identify how the introduction of hinge-like notches or instabilities, versus their pristine counterparts, can pave way for controlling bulk BIAS behavior. Two-dimensional arrays of repeating unit cells were fabricated, with notches implemented at key locations throughout the structure, to harvest the instability-induced surface features for applications such as camouflage, surface morphing, and soft robotic grippers