Architectures and Key Technical Challenges for 5G Systems Incorporating Satellites

Satellite Communication systems are a promising solution to extend and complement terrestrial networks in unserved or under-served areas. This aspect is reflected by recent commercial and standardisation endeavours. In particular, 3GPP recently initiated a Study Item for New Radio-based, i.e., 5G, Non-Terrestrial Networks aimed at deploying satellite systems either as a stand-alone solution or as an integration to terrestrial networks in mobile broadband and machine-type communication scenarios. However, typical satellite channel impairments, as large path losses, delays, and Doppler shifts, pose severe challenges to the realisation of a satellite-based NR network. In this paper, based on the architecture options currently being discussed in the standardisation fora, we discuss and assess the impact of the satellite channel characteristics on the physical and Medium Access Control layers, both in terms of transmitted waveforms and procedures for enhanced Mobile BroadBand (eMBB) and NarrowBand-Internet of Things (NB-IoT) applications. The proposed analysis shows that the main technical challenges are related to the PHY/MAC procedures, in particular Random Access (RA), Timing Advance (TA), and Hybrid Automatic Repeat reQuest (HARQ) and, depending on the considered service and architecture, different solutions are proposed.Comment: Submitted to Transactions on Vehicular Technologies, April 201

Novel architecture for cellular IoT in future non-terrestrial networks: store and forward adaptations for enabling discontinuous feeder link operation

© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The Internet of Things (IoT) paradigm has already progressed from an emerging technology to an incredibly fast-growing field. Defined as one of the three key services in 5th Generation (5G), massive Machine Type Communications (mMTC) are intended to enable the wide-spread adoption of IoT services across the globe. Satellite-based Non-Terrestrial Networks (NTN) are crucial in providing connectivity with global coverage including rural and offshore areas, which are fundamental for supporting important use cases in future networks. A rapidly growing market for IoT devices with mMTC applications using NarrowBandIoT (NB-IoT) will represent a large share of user equipment (UE) in such areas. While standardization efforts for NTN are underway for forthcoming 3GPP releases, they focus on transparent payload architectures where the satellite platform is necessarily connected to a ground station gateway to be able to provide satellite access services to IoT devices, thus requiring complex ground segment infrastructure in low Earth orbit (LEO) constellation deployments to achieve global coverage. In contrast, satellite network deployments targeting the delivery of delay-tolerant IoT applications using NB-IoT, which are a major mMTC use case, can benefit from architectures based on the use of regenerative payloads in the satellite and support for Store and Forward (S&F) operation where satellite access can remain operational even at times when the satellite is not connected to a ground station. In particular, such an approach would allow for extending satellite service coverage in areas where satellites cannot be connected to ground stations (e.g. maritime or very remote areas with lack of ground-stations infrastructures), improving ground segment affordability by enabling operation with fewer ground-stations and allowing more robust operation of the satellite under intermittent feeder link operation. In this paper, we provide a high-level design of an extended 3GPP architecture featuring store and forward mechanisms for IoT NTN delay-tolerant applications that address the previous challenges, as well as a laboratory validation of said architecture for a specific use case.Peer ReviewedPostprint (published version

Looking at NB-IoT over LEO Satellite Systems: Design and Evaluation of a Service-Oriented Solution

The adoption of the NB-IoT technology in satellite communications intends to boost Internet of Things services beyond the boundaries imposed by the current terrestrial infrastructures. Apart from link-level studies in the scientific literature and preliminary 3GPP technical reports, the overall debate is still open. To provide a further step forward in this direction, the work presented herein pursues a novel service-oriented methodology to design an effective solution, meticulously stitched around application requirements and technological constraints. To this end, it conducts link-level and system-level investigations to tune physical transmissions, satellite constellation, and protocol architecture, while ensuring the expected system behavior. To offer a real smart agriculture service operating in Europe, the resulting solution exploits 24 Low Earth Orbit satellites, grouped into 8 different orbits, moving at an altitude of 500 km. The configured protocol stack supports the transmission of tens of bytes generated at the application layer, by also counteracting the issues introduced by the satellite link. Since each satellite has the whole protocol stack on-board, terminals can transmit data without the need for the feeder link. This ensures communication latencies ranging from 16 minutes to 75 minutes, depending on the served number of terminals and the physical transmission settings. Moreover, the usage of the Early Data Transmission scheme reduces communication latencies up to 40%. These results pave the way towards the deployment of an effective proof-of-concept, which drastically reduces the time-to-market imposed by the current state of the art

NB-IoT via LEO satellites: An efficient resource allocation strategy for uplink data transmission

In this paper, we focus on the use of Low-Eart Orbit (LEO) satellites providing the Narrowband Internet of Things (NB-IoT) connectivity to the on-ground user equipment (UEs). Conventional resource allocation algorithms for the NBIoT systems are particularly designed for terrestrial infrastructures, where devices are under the coverage of a specific base station and the whole system varies very slowly in time. The existing methods in the literature cannot be applied over LEO satellite-based NB-IoT systems for several reasons. First, with the movement of the LEO satellite, the corresponding channel parameters for each user will quickly change over time. Delaying the scheduling of a certain user would result in a resource allocation based on outdated parameters. Second, the differential Doppler shift, which is a typical impairment in communications over LEO, directly depends on the relative distance among users. Scheduling at the same radio frame users that overcome a certain distance would violate the differential Doppler limit supported by the NB-IoT standard. Third, the propagation delay over a LEO satellite channel is around 4-16 times higher compared to a terrestrial system, imposing the need for message exchange minimization between the users and the base station. In this work, we propose a novel uplink resource allocation strategy that jointly incorporates the new design considerations previously mentioned together with the distinct channel conditions, satellite coverage times and data demands of various users on Earth. The novel methodology proposed in this paper can act as a framework for future works in the field.Comment: Tis work has been submitted to the IEEE IoT Journal for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessibl