4D Characterization of Short- and Long-term Height-varying Decorrelated Forest SAR Backscattering

Pol-InSAR and 3D multibaseline SAR Tomography (Tomo-SAR) can extract rich information on complex scenarios with multiple scatterers mapped in the SAR cell, in particular for forest remote sensing. However, forest scenarios are characterized by a temporal decorrelating volume canopy scatterer, and a set of related open problems exists, in particular for Tomo-SAR techniques to be applied to spaceborne monitoring of biomass. Multipass 4D Differential Tomography (Diff-Tomo) is a promising advancement, furnishing space (height)-time signatures of multiple scatterer dynamics in the SAR cell, originally with urban applications. In this paper, to better characterize forest decorrelation phenomena impacting Tomo-SAR/Pol-InSAR, experimental results are presented of the extension of Diff-Tomo methods for analyzing vegetated scenes, to extract jointly geometric and dynamic information of forest layers, at both the long and short time scale. The Diff-Tomo enabled functionality of separation in the height dimension of different temporal coherence levels (“coherence profilingâ€) that are mixed (undiscriminated) in classical total coherence analyses is extensively applied to airborne P-band multipolarimetric data, and results of this investigation are shown. Also, first ground-based radar results are presented of an innovative profiling along the height dimension of the short-term coherence, in particular aiming to characterize the magnitudes of short-term coherence times. Their expected variability along the tree structures is confirmed for the first time

Elevation Extraction from Spaceborne SAR Tomography Using Multi-Baseline COSMO-SkyMed SAR Data

SAR tomography (TomoSAR) extends SAR interferometry (InSAR) to image a complex 3D scene with multiple scatterers within the same SAR cell. The phase calibration method and the super-resolution reconstruction method play a crucial role in 3D TomoSAR imaging from multi-baseline SAR stacks, and they both influence the accuracy of the 3D SAR tomographic imaging results. This paper presents a systematic processing method for 3D SAR tomography imaging. Moreover, with the newly released TanDEM-X 12 m DEM, this study proposes a new phase calibration method based on SAR InSAR and DEM error estimation with the super-resolution reconstruction compressive sensing (CS) method for 3D TomoSAR imaging using COSMO-SkyMed Spaceborne SAR data. The test, fieldwork, and results validation were executed at Zipingpu Dam, Dujiangyan, Sichuan, China. After processing, the 1 m resolution TomoSAR elevation extraction results were obtained. Against the terrestrial Lidar ‘truth’ data, the elevation results were shown to have an accuracy of 0.25 ± 1.04 m and a RMSE of 1.07 m in the dam area. The results and their subsequent validation demonstrate that the X band data using the CS method are not suitable for forest structure reconstruction, but are fit for purpose for the elevation extraction of manufactured facilities including buildings in the urban area

The Application of Tomographic Reconstruction Techniques to Ill-Conditioned Inverse Problems in Atmospheric Science and Biomedical Imaging

A methodology is presented for creating tomographic reconstructions from various projection data, and the relevance of the results to applications in atmospheric science and biomedical imaging is analyzed. The fundamental differences between transform and iterative methods are described and the properties of the imaging configurations are addressed. The presented results are particularly suited for highly ill-conditioned inverse problems in which the imaging data are restricted as a result of poor angular coverage, limited detector arrays, or insufficient access to an imaging region. The class of reconstruction algorithms commonly used in sparse tomography, the algebraic reconstruction techniques, is presented, analyzed, and compared. These algorithms are iterative in nature and their accuracy depends significantly on the initialization of the algorithm, the so-called initial guess. A considerable amount of research was conducted into novel initialization techniques as a means of improving the accuracy. The main body of this paper is comprised of three smaller papers, which describe the application of the presented methods to atmospheric and medical imaging modalities. The first paper details the measurement of mesospheric airglow emissions at two camera sites operated by Utah State University. Reconstructions of vertical airglow emission profiles are presented, including three-dimensional models of the layer formed using a novel fanning technique. The second paper describes the application of the method to the imaging of polar mesospheric clouds (PMCs) by NASA’s Aeronomy of Ice in the Mesosphere (AIM) satellite. The contrasting elements of straight-line and diffusive tomography are also discussed in the context of ill-conditioned imaging problems. A number of developing modalities in medical tomography use near-infrared light, which interacts strongly with biological tissue and results in significant optical scattering. In order to perform tomography on the diffused signal, simulations must be incorporated into the algorithm, which describe the sporadic photon migration. The third paper presents a novel Monte Carlo technique derived from the optical scattering solution for spheroidal particles designed to mimic mitochondria and deformed cell nuclei. Simulated results of optical diffusion are presented. The potential for improving existing imaging modalities through continual development of sparse tomography and optical scattering methods is discussed

Urban Deformation Monitoring using Persistent Scatterer Interferometry and SAR tomography

This book focuses on remote sensing for urban deformation monitoring. In particular, it highlights how deformation monitoring in urban areas can be carried out using Persistent Scatterer Interferometry (PSI) and Synthetic Aperture Radar (SAR) Tomography (TomoSAR). Several contributions show the capabilities of Interferometric SAR (InSAR) and PSI techniques for urban deformation monitoring. Some of them show the advantages of TomoSAR in un-mixing multiple scatterers for urban mapping and monitoring. This book is dedicated to the technical and scientific community interested in urban applications. It is useful for choosing the appropriate technique and gaining an assessment of the expected performance. The book will also be useful to researchers, as it provides information on the state-of-the-art and new trends in this fiel

Elevation and Deformation Extraction from TomoSAR

3D SAR tomography (TomoSAR) and 4D SAR differential tomography (Diff-TomoSAR) exploit multi-baseline SAR data stacks to provide an essential innovation of SAR Interferometry for many applications, sensing complex scenes with multiple scatterers mapped into the same SAR pixel cell. However, these are still influenced by DEM uncertainty, temporal decorrelation, orbital, tropospheric and ionospheric phase distortion and height blurring. In this thesis, these techniques are explored. As part of this exploration, the systematic procedures for DEM generation, DEM quality assessment, DEM quality improvement and DEM applications are first studied. Besides, this thesis focuses on the whole cycle of systematic methods for 3D & 4D TomoSAR imaging for height and deformation retrieval, from the problem formation phase, through the development of methods to testing on real SAR data. After DEM generation introduction from spaceborne bistatic InSAR (TanDEM-X) and airborne photogrammetry (Bluesky), a new DEM co-registration method with line feature validation (river network line, ridgeline, valley line, crater boundary feature and so on) is developed and demonstrated to assist the study of a wide area DEM data quality. This DEM co-registration method aligns two DEMs irrespective of the linear distortion model, which improves the quality of DEM vertical comparison accuracy significantly and is suitable and helpful for DEM quality assessment. A systematic TomoSAR algorithm and method have been established, tested, analysed and demonstrated for various applications (urban buildings, bridges, dams) to achieve better 3D & 4D tomographic SAR imaging results. These include applying Cosmo-Skymed X band single-polarisation data over the Zipingpu dam, Dujiangyan, Sichuan, China, to map topography; and using ALOS L band data in the San Francisco Bay region to map urban building and bridge. A new ionospheric correction method based on the tile method employing IGS TEC data, a split-spectrum and an ionospheric model via least squares are developed to correct ionospheric distortion to improve the accuracy of 3D & 4D tomographic SAR imaging. Meanwhile, a pixel by pixel orbit baseline estimation method is developed to address the research gaps of baseline estimation for 3D & 4D spaceborne SAR tomography imaging. Moreover, a SAR tomography imaging algorithm and a differential tomography four-dimensional SAR imaging algorithm based on compressive sensing, SAR interferometry phase (InSAR) calibration reference to DEM with DEM error correction, a new phase error calibration and compensation algorithm, based on PS, SVD, PGA, weighted least squares and minimum entropy, are developed to obtain accurate 3D & 4D tomographic SAR imaging results. The new baseline estimation method and consequent TomoSAR processing results showed that an accurate baseline estimation is essential to build up the TomoSAR model. After baseline estimation, phase calibration experiments (via FFT and Capon method) indicate that a phase calibration step is indispensable for TomoSAR imaging, which eventually influences the inversion results. A super-resolution reconstruction CS based study demonstrates X band data with the CS method does not fit for forest reconstruction but works for reconstruction of large civil engineering structures such as dams and urban buildings. Meanwhile, the L band data with FFT, Capon and the CS method are shown to work for the reconstruction of large manmade structures (such as bridges) and urban buildings

Tomographic Laser Absorption Imaging of Combustion Gases in the Mid-wave Infrared

This dissertation describes advancements in mid-infrared laser absorption tomography for spatio-temporal measurements of thermochemistry in reacting flows relevant to combustion systems. Tunable laser absorption spectroscopy is combined with tomographic reconstruction techniques to resolve small diameter ( < 1 cm) non-uniform flow fields with steep spatial gradients, leveraging emerging mid-wave infrared photonics. Multiple novel measurement methods, hardware configurations, and image processing techniques were investigated. Initially, a mid-infrared laser absorption tomography sensing method was developed for quantitative measurement of CO and CO2 concentrations and temperature distributions in turbulent premixed jet flames using a translation-stage-mounted optical system. This sensing approach was used to examine effects of varying fuel structure on carbon oxidation over a range of Reynolds number regimes. It was found that spatial and temporal resolution is limited in this method due to the finite laser beam size (~ 1 mm) and the slow mechanical translation of the optical system. To address these limitations, a novel laser absorption imaging (LAI) technique, that expands a single laser beam and replaces the detector with a high-speed infrared camera, was introduced to achieve enhanced spatial and temporal resolution for thermo-chemical imaging. As a demonstration of this new technique, distributions of combustion species were imaged in both axisymmetric and non-axisymmetric flow fields using linear tomography algorithms. For non-axisymetric flows, the limited view tomography problem often results in a blurring effect and artifacts in the reconstructed flow-field. In an effort to address these issues, state-of-the-art deep learning neural networks were developed and applied to solve the limited angle inversion. Initial results suggest that deep neural networks have potential to more accurately predict flame structures with fewer projection angles than linear tomography. This work provides a foundation for a new approach to quantitative time-resolved 3D thermo-chemical imaging in high-temperature reacting flows

Very High Resolution Tomographic SAR Inversion for Urban Infrastructure Monitoring — A Sparse and Nonlinear Tour

The topic of this thesis is very high resolution (VHR) tomographic SAR inversion for urban infrastructure monitoring. To this end, SAR tomography and differential SAR tomography are demonstrated using TerraSAR-X spotlight data for providing 3-D and 4-D (spatial-temporal) maps of an entire high rise city area including layover separation and estimation of deformation of the buildings. A compressive sensing based estimator (SL1MMER) tailored to VHR SAR data is developed for tomographic SAR inversion by exploiting the sparsity of the signal. A systematic performance assessment of the algorithm is performed regarding elevation estimation accuracy, super-resolution and robustness. A generalized time warp method is proposed which enables differential SAR tomography to estimate multi-component nonlinear motion. All developed methods are validated with both simulated and extensive processing of large volumes of real data from TerraSAR-X

Study of the speckle noise effects over the eigen decomposition of polarimetric SAR data: a review

This paper is focused on considering the effects of speckle noise on the eigen decomposition of the co- herency matrix. Based on a perturbation analysis of the matrix, it is possible to obtain an analytical expression for the mean value of the eigenvalues and the eigenvectors, as well as for the Entropy, the Anisotroopy and the dif- ferent a angles. The analytical expressions are compared against simulated polarimetric SAR data, demonstrating the correctness of the different expressions.Peer ReviewedPostprint (published version

Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

undefine