8,423 research outputs found
InLoc: Indoor Visual Localization with Dense Matching and View Synthesis
We seek to predict the 6 degree-of-freedom (6DoF) pose of a query photograph
with respect to a large indoor 3D map. The contributions of this work are
three-fold. First, we develop a new large-scale visual localization method
targeted for indoor environments. The method proceeds along three steps: (i)
efficient retrieval of candidate poses that ensures scalability to large-scale
environments, (ii) pose estimation using dense matching rather than local
features to deal with textureless indoor scenes, and (iii) pose verification by
virtual view synthesis to cope with significant changes in viewpoint, scene
layout, and occluders. Second, we collect a new dataset with reference 6DoF
poses for large-scale indoor localization. Query photographs are captured by
mobile phones at a different time than the reference 3D map, thus presenting a
realistic indoor localization scenario. Third, we demonstrate that our method
significantly outperforms current state-of-the-art indoor localization
approaches on this new challenging data
A minimalistic approach to appearance-based visual SLAM
This paper presents a vision-based approach to SLAM in indoor / outdoor environments with minimalistic sensing and computational requirements. The approach is based on a graph representation of robot poses, using a relaxation algorithm to obtain a globally consistent map. Each link corresponds to a
relative measurement of the spatial relation between the two nodes it connects. The links describe the likelihood distribution of the relative pose as a Gaussian distribution. To estimate the covariance matrix for links obtained from an omni-directional vision sensor, a novel method is introduced based on the relative similarity of neighbouring images. This new method does not require determining distances to image features using multiple
view geometry, for example. Combined indoor and outdoor experiments demonstrate that the approach can handle qualitatively different environments (without modification of the parameters), that it can cope with violations of the “flat floor assumption” to some degree, and that it scales well with increasing size of the environment, producing topologically correct and geometrically accurate maps at low computational cost. Further experiments demonstrate that the approach is also suitable for combining multiple overlapping maps, e.g. for solving the multi-robot SLAM problem with unknown initial poses
3D Registration of Aerial and Ground Robots for Disaster Response: An Evaluation of Features, Descriptors, and Transformation Estimation
Global registration of heterogeneous ground and aerial mapping data is a
challenging task. This is especially difficult in disaster response scenarios
when we have no prior information on the environment and cannot assume the
regular order of man-made environments or meaningful semantic cues. In this
work we extensively evaluate different approaches to globally register UGV
generated 3D point-cloud data from LiDAR sensors with UAV generated point-cloud
maps from vision sensors. The approaches are realizations of different
selections for: a) local features: key-points or segments; b) descriptors:
FPFH, SHOT, or ESF; and c) transformation estimations: RANSAC or FGR.
Additionally, we compare the results against standard approaches like applying
ICP after a good prior transformation has been given. The evaluation criteria
include the distance which a UGV needs to travel to successfully localize, the
registration error, and the computational cost. In this context, we report our
findings on effectively performing the task on two new Search and Rescue
datasets. Our results have the potential to help the community take informed
decisions when registering point-cloud maps from ground robots to those from
aerial robots.Comment: Awarded Best Paper at the 15th IEEE International Symposium on
Safety, Security, and Rescue Robotics 2017 (SSRR 2017
Navigace mobilních robotů v neznámém prostředí s využitím měření vzdáleností
The ability of a robot to navigate itself in the environment is a crucial step towards its autonomy. Navigation as a subtask of the development of autonomous robots is the subject of this thesis, focusing on the development of a method for simultaneous localization an mapping (SLAM) of mobile robots in six degrees of freedom (DOF). As a part of this research, a platform for 3D range data acquisition based on a continuously inclined laser rangefinder was developed. This platform is presented, evaluating the measurements and also presenting the robotic equipment on which the platform can be fitted. The localization and mapping task is equal to the registration of multiple 3D images into a common frame of reference. For this purpose, a method based on the Iterative Closest Point (ICP) algorithm was developed. First, the originally implemented SLAM method is presented, focusing on the time-wise performance and the registration quality issues introduced by the implemented algorithms. In order to accelerate and improve the quality of the time-demanding 6DOF image registration, an extended method was developed. The major extension is the introduction of a factorized registration, extracting 2D representations of vertical objects called leveled maps from the 3D point sets, ensuring these representations are 3DOF invariant. The extracted representations are registered in 3DOF using ICP algorithm, allowing pre-alignment of the 3D data for the subsequent robust 6DOF ICP based registration. The extended method is presented, showing all important modifications to the original method. The developed registration method was evaluated using real 3D data acquired in different indoor environments, examining the benefits of the factorization and other extensions as well as the performance of the original ICP based method. The factorization gives promising results compared to a single phase 6DOF registration in vertically structured environments. Also, the disadvantages of the method are discussed, proposing possible solutions. Finally, the future prospects of the research are presented.Schopnost lokalizace a navigace je podmínkou autonomního provozu mobilních robotů. Předmětem této disertační práce jsou navigační metody se zaměřením na metodu pro simultánní lokalizaci a mapování (SLAM) mobilních robotů v šesti stupních volnosti (6DOF). Nedílnou součástí tohoto výzkumu byl vývoj platformy pro sběr 3D vzdálenostních dat s využitím kontinuálně naklápěného laserového řádkového scanneru. Tato platforma byla vyvinuta jako samostatný modul, aby mohla být umístěna na různé šasi mobilních robotů. Úkol lokalizace a mapování je ekvivalentní registraci více 3D obrazů do společného souřadného systému. Pro tyto účely byla vyvinuta metoda založená na algoritmu Iterative Closest Point Algorithm (ICP). Původně implementovaná verze navigační metody využívá ICP s akcelerací pomocí kd-stromů přičemž jsou zhodnoceny její kvalitativní a výkonnostní aspekty. Na základě této analýzy byly vyvinuty rozšíření původní metody založené na ICP. Jednou z hlavních modifikací je faktorizace registračního procesu, kdy tato faktorizace je založena na redukci dat: vytvoření 2D „leveled“ map (ve smyslu jednoúrovňových map) ze 3D vzdálenostních obrazů. Pro tuto redukci je technologicky i algoritmicky zajištěna invariantnost těchto map vůči třem stupňům volnosti. Tyto redukované mapy jsou registrovány pomocí ICP ve zbylých třech stupních volnosti, přičemž získaná transformace je aplikována na 3D data za účelem před-registrace 3D obrazů. Následně je provedena robustní 6DOF registrace. Rozšířená metoda je v disertační práci v popsána spolu se všemi podstatnými modifikacemi. Vyvinutá metoda byla otestována a zhodnocena s využitím skutečných 3D vzdálenostních dat naměřených v různých vnitřních prostředích. Jsou zhodnoceny přínosy faktorizace a jiných modifikací ve srovnání s původní jednofázovou 6DOF registrací, také jsou zmíněny nevýhody implementované metody a navrženy způsoby jejich řešení. Nakonec následuje návrh budoucího výzkumu a diskuse o možnostech dalšího rozvoje.
Vision-model-based Real-time Localization of Unmanned Aerial Vehicle for Autonomous Structure Inspection under GPS-denied Environment
UAVs have been widely used in visual inspections of buildings, bridges and
other structures. In either outdoor autonomous or semi-autonomous flights
missions strong GPS signal is vital for UAV to locate its own positions.
However, strong GPS signal is not always available, and it can degrade or fully
loss underneath large structures or close to power lines, which can cause
serious control issues or even UAV crashes. Such limitations highly restricted
the applications of UAV as a routine inspection tool in various domains. In
this paper a vision-model-based real-time self-positioning method is proposed
to support autonomous aerial inspection without the need of GPS support.
Compared to other localization methods that requires additional onboard
sensors, the proposed method uses a single camera to continuously estimate the
inflight poses of UAV. Each step of the proposed method is discussed in detail,
and its performance is tested through an indoor test case.Comment: 8 pages, 5 figures, submitted to i3ce 201
- …