Visual servoing of an autonomous helicopter in urban areas using feature tracking

We present the design and implementation of a vision-based feature tracking system for an autonomous helicopter. Visual sensing is used for estimating the position and velocity of features in the image plane (urban features like windows) in order to generate velocity references for the flight control. These visual-based references are then combined with GPS-positioning references to navigate towards these features and then track them. We present results from experimental flight trials, performed in two UAV systems and under different conditions that show the feasibility and robustness of our approach

Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition

The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future

Proceedings of the 4th field robot event 2006, Stuttgart/Hohenheim, Germany, 23-24th June 2006

Zeer uitgebreid verslag van het 4e Fieldrobotevent, dat gehouden werd op 23 en 24 juni 2006 in Stuttgart/Hohenhei

An efficacious method to assemble a modern multi-modal robotic team: dilemmas, challenges, possibilities and solutions

A modern multiagent robotic platform consists of a cooperative team of humans which develop a collaborative team of robots. The multi-modal nature of both the system and the team causes a complex problem which needs to be solved for optimum performance. Both the management and the technical aspect of a modern robotic team are explored in this Chapter in the platform of the RoboCup Competition. RoboCup is an example of such an environment where researchers from different disciplines join to develop a robotic team for completion as an evaluation challenge (Robocup, 2011). RoboCup competitions were first proposed by Mackworth in 1993. The main goal of this scientific competition is to exploit, improve and integrate the methods and techniques from robotics, machine vision and artificial intelligence disciplines to create an autonomous team of soccer playing robots(Kitano, 1997a; Kitano, 1997b; Kitano et al., 1997). Such experiment includes several challenges, from inviting an expert of specific field to the team to choosing bolts and nuts for each part of the robots. Usually each challenge has several possible solutions and choosing the best one is often challenging. We have participated in several world wide RoboCup competitions (Abdollahi, Samani et al. 2002, 2003 & 2004) and share our experience as an extensive instruction for setting up a modern robotic team including management and technical issues.Peer ReviewedPostprint (published version

Leonardo Drone Contest Autonomous Drone Competition: Overview, Results, and Lessons Learned from Politecnico di Milano Team

In this paper, the Politecnico di Milano solutions proposed for the Leonardo Drone Contest (LDC) are presented. The Leonardo Drone Contest is an annual autonomous drone competition among universities, which has already seen the conclusion of its second edition. In each edition, the participating teams were asked to design and build an autonomous multicopter, capable of accomplishing complex tasks in an indoor urban-like environment. To reach this goal, the designed systems should be capable of navigating in a Global Navigation Satellite System (GNSS)-denied environment with autonomous decision making, online planning and collision avoidance capabilities. In this light, the authors describe the first two editions of the competition, i.e., their rules, objectives and overview of the proposed solutions. While the first edition is presented as relevant for the experience and takeaways acquired from it, the second edition solution is analyzed in detail, providing both the simulation and experimental results obtained

Mechanical Design and Analysis of All‐terrain Mobile Robot

This paper presents the conceptual mechanical analysis of the all-terrain mobile robot (AMoBo). The locomotion concept for all-terrain mobile robot is based on six independent motorized wheels. The mobile robot has a steering wheel in the front and the rear, and two wheels arranged on a bogie on each side. The front wheel has a spring suspension to guarantee optimal ground contact of all wheels at any time. The steering of the vehicle is realized by synchronizing the steering of the front and rear wheels and the speed difference of the bogie wheels. A prototype AMoBo was designed and fabricated. The developed prototype is about 66 cm in length and 23 cm in height. Testing size results show that the prototype able to overcome obstacles of same height as its wheel diameter and can climb stairs with step height of over 10 cm. Finite element analysis was used to analyse and verify the strength of each critical part of AMoBo. The base plate appeared to be the critical part with the highest shear stress and the lowest safety factor

Mechanical Design and Analysis of All‐terrain Mobile Robot

This paper presents the conceptual mechanical analysis of the all-terrain mobile robot (AMoBo). The locomotion concept for all-terrain mobile robot is based on six independent motorized wheels. The mobile robot has a steering wheel in the front and the rear, and two wheels arranged on a bogie on each side. The front wheel has a spring suspension to guarantee optimal ground contact of all wheels at any time. The steering of the vehicle is realized by synchronizing the steering of the front and rear wheels and the speed difference of the bogie wheels. A prototype AMoBo was designed and fabricated. The developed prototype is about 66 cm in length and 23 cm in height. Testing size results show that the prototype able to overcome obstacles of same height as its wheel diameter and can climb stairs with step height of over 10 cm. Finite element analysis was used to analyse and verify the strength of each critical part of AMoBo. The base plate appeared to be the critical part with the highest shear stress and the lowest safety factor