Symbolic tolerance and sensitivity analysis of large scale electronic circuits

Available from British Library Document Supply Centre-DSC:DXN029693 / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

A Review on Key Issues and Challenges in Devices Level MEMS Testing

The present review provides information relevant to issues and challenges in MEMS testing techniques that are implemented to analyze the microelectromechanical systems (MEMS) behavior for specific application and operating conditions. MEMS devices are more complex and extremely diverse due to the immersion of multidomains. Their failure modes are distinctive under different circumstances. Therefore, testing of these systems at device level as well as at mass production level, that is, parallel testing, is becoming very challenging as compared to the IC test, because MEMS respond to electrical, physical, chemical, and optical stimuli. Currently, test systems developed for MEMS devices have to be customized due to their nondeterministic behavior and complexity. The accurate measurement of test systems for MEMS is difficult to quantify in the production phase. The complexity of the device to be tested required maturity in the test technique which increases the cost of test development; this practice is directly imposed on the device cost. This factor causes a delay in time-to-market

Methods and architectures based on modular redundancy for fault-tolerant combinational circuits

Dans cette thèse, nous nous intéressons à la recherche d architectures fiables pour les circuits logiques. Par fiable , nous entendons des architectures permettant le masquage des fautes et les rendant de ce fait tolérantes" à ces fautes. Les solutions pour la tolérance aux fautes sont basées sur la redondance, d où le surcoût qui y est associé. La redondance peut être mise en oeuvre de différentes manières : statique ou dynamique, spatiale ou temporelle. Nous menons cette recherche en essayant de minimiser tant que possible le surcoût matériel engendré par le mécanisme de tolérance aux fautes. Le travail porte principalement sur les solutions de redondance modulaire, mais certaines études développées sont beaucoup plus générales.In this thesis, we mainly take into account the representative technique Triple Module Redundancy (TMR) as the reliability improvement technique. A voter is an necessary element in this kind of fault-tolerant architectures. The importance of reliability in majority voter is due to its application in both conventional fault-tolerant design and novel nanoelectronic systems. The property of a voter is therefore a bottleneck since it directly determines the whole performance of a redundant fault-tolerant digital IP (such as a TMR configuration). Obviously, the efficacy of TMR is to increase the reliability of digital IP. However, TMR sometimes could result in worse reliability than a simplex function module could. A better understanding of functional and signal reliability characteristics of a 3-input majority voter (majority voting in TMR) is studied. We analyze them by utilizing signal probability and boolean difference. It is well known that the acquisition of output signal probabilities is much easier compared with the obtention of output reliability. The results derived in this thesis proclaim the signal probability requirements for inputs of majority voter, and thereby reveal the conditions that TMR technique requires. This study shows the critical importance of error characteristics of majority voter, as used in fault-tolerant designs. As the flawlessness of majority voter in TMR is not true, we also proposed a fault-tolerant and simple 2-level majority voter structure for TMR. This alternative architecture for majority voter is useful in TMR schemes. The proposed solution is robust to single fault and exceeds those previous ones in terms of reliability.PARIS-Télécom ParisTech (751132302) / SudocSudocFranceF

MOCAST 2021

The 10th International Conference on Modern Circuit and System Technologies on Electronics and Communications (MOCAST 2021) will take place in Thessaloniki, Greece, from July 5th to July 7th, 2021. The MOCAST technical program includes all aspects of circuit and system technologies, from modeling to design, verification, implementation, and application. This Special Issue presents extended versions of top-ranking papers in the conference. The topics of MOCAST include:Analog/RF and mixed signal circuits;Digital circuits and systems design;Nonlinear circuits and systems;Device and circuit modeling;High-performance embedded systems;Systems and applications;Sensors and systems;Machine learning and AI applications;Communication; Network systems;Power management;Imagers, MEMS, medical, and displays;Radiation front ends (nuclear and space application);Education in circuits, systems, and communications

Test analysis & fault simulation of microfluidic systems

This work presents a design, simulation and test methodology for microfluidic systems, with particular focus on simulation for test. A Microfluidic Fault Simulator (MFS) has been created based around COMSOL which allows a fault-free system model to undergo fault injection and provide test measurements. A post MFS test analysis procedure is also described.A range of fault-free system simulations have been cross-validated to experimental work to gauge the accuracy of the fundamental simulation approach prior to further investigation and development of the simulation and test procedure.A generic mechanism, termed a fault block, has been developed to provide fault injection and a method of describing a low abstraction behavioural fault model within the system. This technique has allowed the creation of a fault library containing a range of different microfluidic fault conditions. Each of the fault models has been cross-validated to experimental conditions or published results to determine their accuracy.Two test methods, namely, impedance spectroscopy and Levich electro-chemical sensors have been investigated as general methods of microfluidic test, each of which has been shown to be sensitive to a multitude of fault. Each method has successfully been implemented within the simulation environment and each cross-validated by first-hand experimentation or published work.A test analysis procedure based around the Neyman-Pearson criterion has been developed to allow a probabilistic metric for each test applied for a given fault condition, providing a quantitive assessment of each test. These metrics are used to analyse the sensitivity of each test method, useful when determining which tests to employ in the final system. Furthermore, these probabilistic metrics may be combined to provide a fault coverage metric for the complete system.The complete MFS method has been applied to two system cases studies; a hydrodynamic “Y” channel and a flow cytometry system for prognosing head and neck cancer.Decision trees are trained based on the test measurement data and fault conditions as a means of classifying the systems fault condition state. The classification rules created by the decision trees may be displayed graphically or as a set of rules which can be loaded into test instrumentation. During the course of this research a high voltage power supply instrument has been developed to aid electro-osmotic experimentation and an impedance spectrometer to provide embedded test