Synchronization and channel estimation in experimental M-QAM OFDM radio over fiber systems using CAZAC based training preamble

In this paper, we propose a new technique for synchronization and channel estimation in M-QAM OFDM radio over fiber (RoF) system by using constant amplitude zero auto-correlation (CAZAC) sequence based training preamble. Delay and correlate method is used to identify the training sequence in the received signal vector and to correct the symbol timing offset. For an optimum demodulation of OFDM signal, optimum down sampling offset position has to be identified before applying symbol timing algorithm. To solve this issue, we present the iterative method of finding optimum down sampling offset position. We show that the training preamble used for synchronization can also be applied to estimate the channel response using averaging technique. Moreover, we used the least square estimation based channel estimation method using pilot subcarriers and compare the results with training preamble based estimation

Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey

In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner

Nonlinear Mixing in Optical Multicarrier Systems

Although optical fiber has a vast spectral bandwidth, efficient use of this bandwidth is still important in order to meet the ever increased capacity demand of optical networks. In addition to wavelength division multiplexing, it is possible to partition multiple low-rate subcarriers into each high speed wavelength channel. Multicarrier systems not only ensure efficient use of optical and electrical components, but also tolerate transmission impairments. The purpose of this research is to understand the impact of mixing among subcarriers in Radio-Over-Fiber (RoF) and high speed optical transmission systems, and experimentally demonstrate techniques to minimize this impact. We also analyze impact of clipping and quantization on multicarrier signals and compare bandwidth efficiency of two popular multiplexing techniques, namely, orthogonal frequency division multiplexing (OFDM) and Nyquist modulation. For an OFDM-RoF system, we present a novel technique that minimizes the RF domain signal-signal beat interference (SSBI), relaxes the phase noise limit on the RF carrier, realizes the full potential of optical heterodyne-based RF carrier generation, and increases the performance-to-cost ratio of RoF systems. We demonstrate a RoF network that shares the same RF carrier for both downlink and uplink, avoiding the need of an additional RF oscillator in the customer unit. For multi-carrier optical transmission, we first experimentally compare performance degradations of coherent optical OFDM and single-carrier Nyquist pulse modulated systems in a nonlinear environment. We then experimentally evaluate SSBI compensation techniques in the presence of semiconductor optical amplifier (SOA) induced nonlinearities for a multicarrier optical system with direct detection. We show that SSBI contamination can be significantly reduced from the data signal when the carrier-to-signal power ratio is sufficiently low

High Data Rate Coherent Optical OFDM System for Long-Haul Transmission

The growth in internet traffic has driven the increase in demand for bandwidth and high data rates. Optical Orthogonal Frequency Division Multiplexing is considered as a promising technology to satisfy the increased demand for bandwidth in broadband services. Optical OFDM received a great attention after proposing it as a modulation technique for the long-haul transmission in both direct and coherent detection. However, Coherent Optical OFDM (CO-OFDM) is the next generation technology for the optical communications, since it integrates the advantages of both coherent systems and OFDM systems. It has the ability to overcome many optical fiber restrictions such as chromatic dispersion (CD) and polarization mode dispersion (PMD). Moreover, Integrating the Coherent Optical OFDM with Wavelength Division Multiplexing (WDM) systems will provide the transmission system with a high bandwidth, a significant data rates, and a high spectral efficiency without increasing the cost or the complexity of the system. WDM systems help to enhance the capacity and the data rate of the system by sending multiple wavelengths over a single fiber. This research focuses on the implementation and performance analysis of high data rate coherent optical OFDM for long-haul transmission. The study starts with a single user and extends to the implanting of the WDM system. OptiSystem-12 simulation tool is fully used to design and implement the system. The system utilizes to carry range of data rates start from 10 Gbps to 1 Tbps, 4-QAM (2 bits-per-symbol) is used a modulation type for the OFDM signal, Optical I/Q modulation is employed at the transmitter and coherent detection is employed at the receiver. The performance of the system is studied and analyzed system in terms of Bit-Error-Rate (BER), the effect of the transmission distance on the Optical-Signal-to-Noise-Ratio (OSNR), and the relation of BER and OSNR with regard to the transmission distance

Visible Light Communication (VLC)

Visible light communication (VLC) using light-emitting diodes (LEDs) or laser diodes (LDs) has been envisioned as one of the key enabling technologies for 6G and Internet of Things (IoT) systems, owing to its appealing advantages, including abundant and unregulated spectrum resources, no electromagnetic interference (EMI) radiation and high security. However, despite its many advantages, VLC faces several technical challenges, such as the limited bandwidth and severe nonlinearity of opto-electronic devices, link blockage and user mobility. Therefore, significant efforts are needed from the global VLC community to develop VLC technology further. This Special Issue, “Visible Light Communication (VLC)”, provides an opportunity for global researchers to share their new ideas and cutting-edge techniques to address the above-mentioned challenges. The 16 papers published in this Special Issue represent the fascinating progress of VLC in various contexts, including general indoor and underwater scenarios, and the emerging application of machine learning/artificial intelligence (ML/AI) techniques in VLC