Virtual-work-based optimization design on compliant transmission mechanism for flapping-wing aerial vehicles

This paper presents a method for analyzing and optimizing the design of a compliant transmission mechanism for a flapping-wing aerial vehicle. Its purpose is of minimizing the peak input torque required from a driving motor. In order to maintain the stability of flight, minimizing the peak input torque is necessary. To this purpose, first, a pseudo-rigid-body model was built and a kinematic analysis of the model was carried out. Next, the aerodynamic torque generated by flapping wings was calculated. Then, the input torque required to keep the flight of the vehicle was solved by using the principle of virtual work. The values of the primary attributes at compliant joints (i.e., the torsional stiffness of virtual spring and the initial neutral angular position) were optimized. By comparing to a full rigid-body mechanism, the compliant transmission mechanism with well-optimized parameters can reduce the peak input torque up to 66.0%

Effect of asymmetry in the restoring force of the "click" mechanism in insect flight

The aim of this paper is to examine the effect of asymmetry in the force-deflection characteristics of an insect flight mechanism on its nonlinear dynamics. An improved simplified model for insect flight mechanism is suggested and numerical methods are used to study its dynamics. The range at which the mechanism may operate is identified. The asymmetry can lead to differences in the velocity in the upward and downward movements which can be beneficial for the insect flight

Investigation of mobile devices usage and mobile augmented reality applications among older people

Mobile devices such as tablets and smartphones have allow users to communicate, entertainment, access information and perform productivity. However, older people are having issues to utilise mobile devices that may affect their quality of life and wellbeing. There are some potentials of mobile Augmented Reality (AR) applications to increase older users mobile usage by enhancing their experience and learning. The study aims to investigate mobile devices potential barriers and influence factors in using mobile devices. It also seeks to understand older people issues in using AR applications

Aeronautical Engineering: A continuing bibliography with indexes (supplement 161)

This bibliography lists 375 reports, articles and other documents introduced into the NASA scientific and technical information system in April 1983

Underwater Vehicles

For the latest twenty to thirty years, a significant number of AUVs has been created for the solving of wide spectrum of scientific and applied tasks of ocean development and research. For the short time period the AUVs have shown the efficiency at performance of complex search and inspection works and opened a number of new important applications. Initially the information about AUVs had mainly review-advertising character but now more attention is paid to practical achievements, problems and systems technologies. AUVs are losing their prototype status and have become a fully operational, reliable and effective tool and modern multi-purpose AUVs represent the new class of underwater robotic objects with inherent tasks and practical applications, particular features of technology, systems structure and functional properties

“Clicking” compliant mechanism for flapping-wing micro aerial vehicle

This paper presented a click mechanism, which is inspired by a Dipteran insect, for use in flapping-wing micro aerial vehicle. The clicking mechanism is integrated in a thorax-like compliant mechanism, which buckles and consequently produces a large wing stroke when driven by an electric motor. The thorax-like compliant mechanism can store elastic energy in flexible hinges and is good for storing kinetic energy expended during wing reversal. This work showed that clicking compliant mechanism produces more thrust per input power than a conventional non-clicking rigid-body mechanism. The clicking prototype weighs 3.58g, has 115° wing stroke, and is able to achieve hovering at 15.8Hz flapping frequency. The non-clicking prototype is lighter at 3.35g with a wingstroke of 100°, but could not achieve hover but could not achieve hovering even though driven by the same motor at a faster flapping frequency (16.2Hz) under the same driving voltage (4.9 V). The clicking prototype produces a thrust-to-power ratio of 2.17g/W, higher than 1.15g/W of the nonclicking counterpart

Human-robot interaction for telemanipulation by small unmanned aerial systems

This dissertation investigated the human-robot interaction (HRI) for the Mission Specialist role in a telemanipulating unmanned aerial system (UAS). The emergence of commercial unmanned aerial vehicle (UAV) platforms transformed the civil and environmental engineering industries through applications such as surveying, remote infrastructure inspection, and construction monitoring, which normally use UAVs for visual inspection only. Recent developments, however, suggest that performing physical interactions in dynamic environments will be important tasks for future UAS, particularly in applications such as environmental sampling and infrastructure testing. In all domains, the availability of a Mission Specialist to monitor the interaction and intervene when necessary is essential for successful deployments. Additionally, manual operation is the default mode for safety reasons; therefore, understanding Mission Specialist HRI is important for all small telemanipulating UAS in civil engineering, regardless of system autonomy and application. A 5 subject exploratory study and a 36 subject experimental study were conducted to evaluate variations of a dedicated, mobile Mission Specialist interface for aerial telemanipulation from a small UAV. The Shared Roles Model was used to model the UAS human-robot team, and the Mission Specialist and Pilot roles were informed by the current state of practice for manipulating UAVs. Three interface camera view designs were tested using a within-subjects design, which included an egocentric view (perspective from the manipulator), exocentric view (perspective from the UAV), and mixed egocentric-exocentric view. The experimental trials required Mission Specialist participants to complete a series of tasks with physical, visual, and verbal requirements. Results from these studies found that subjects who preferred the exocentric condition performed tasks 50% faster when using their preferred interface; however, interface preferences did not affect performance for participants who preferred the mixed condition. This result led to a second finding that participants who preferred the exocentric condition were distracted by the egocentric view during the mixed condition, likely caused by cognitive tunneling, and the data suggest tradeoffs between performance improvements and attentional costs when adding information in the form of multiple views to the Mission Specialist interface. Additionally, based on this empirical evaluation of multiple camera views, the exocentric view was recommended for use in a dedicated Mission Specialist telemanipulation interface. Contributions of this thesis include: i) conducting the first focused HRI study of aerial telemanipulation, ii) development of an evaluative model for telemanipulation performance, iii) creation of new recommendations for aerial telemanipulation interfacing, and iv) contribution of code, hardware designs, and system architectures to the open-source UAV community. The evaluative model provides a detailed framework, a complement to the abstraction of the Shared Roles Model, that can be used to measure the effects of changes in the system, environment, operators, and interfacing factors on performance. The practical contributions of this work will expedite the use of manipulating UAV technologies by scientists, researchers, and stakeholders, particularly those in civil engineering, who will directly benefit from improved manipulating UAV performance

31th International Conference on Information Modelling and Knowledge Bases

Information modelling is becoming more and more important topic for researchers, designers, and users of information systems.The amount and complexity of information itself, the number of abstractionlevels of information, and the size of databases and knowledge bases arecontinuously growing. Conceptual modelling is one of the sub-areas ofinformation modelling. The aim of this conference is to bring together experts from different areas of computer science and other disciplines, who have a common interest in understanding and solving problems on information modelling and knowledge bases, as well as applying the results of research to practice. We also aim to recognize and study new areas on modelling and knowledge bases to which more attention should be paid. Therefore philosophy and logic, cognitive science, knowledge management, linguistics and management science are relevant areas, too. In the conference, there will be three categories of presentations, i.e. full papers, short papers and position papers

Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015

This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: ● Formulations and Numerical Methods ● Efficient Methods and Real-Time Applications ● Flexible Multibody Dynamics ● Contact Dynamics and Constraints ● Multiphysics and Coupled Problems ● Control and Optimization ● Software Development and Computer Technology ● Aerospace and Maritime Applications ● Biomechanics ● Railroad Vehicle Dynamics ● Road Vehicle Dynamics ● Robotics ● Benchmark ProblemsPostprint (published version