Ultimate and practical limits of fluid-based mass detection with suspended microchannel resonators

Suspended microchannel resonators (SMRs) are an innovative approach to fluid-based microelectromechanical mass sensing that circumvents complete immersion of the sensor. By embedding the fluidics within the device itself, vacuum-based operation of the resonator becomes possible. This enables frequency shift-based mass detection with high quality factors, and hence sensitivity comparable to vacuum-based micromechanical resonators. Here we present a detailed analysis of the sensitivity of these devices, including consideration of fundamental and practical noise limits, and the important role of binding kinetics in sensing.We demonstrate that these devices show significant promise for protein detection. For larger, biologically-important targets such as rare whole virions, the required analysis time to flow sufficient sample through the sensor can become prohibitively long unless large parallel arrays of sensors or preconcentrators are employed

From aptamer-based biomarker discovery to diagnostic and clinical applications: an aptamer-based, streamlined multiplex proteomic assay

Recently, we reported an aptamer-based, highly multiplexed assay for the purpose of biomarker identification. To enable seamless transition from highly multiplexed biomarker discovery assays to a format suitable and convenient for diagnostic and life-science applications, we developed a streamlined, plate-based version of the assay. The plate-based version of the assay is robust, sensitive (sub-picomolar), rapid, can be highly multiplexed (upwards of 60 analytes), and fully automated. We demonstrate that quantification by microarray-based hybridization, Luminex bead-based methods, and qPCR are each compatible with our platform, further expanding the breadth of proteomic applications for a wide user community

Comparison of enzyme-linked immunosorbent assay, surface plasmon resonance and biolayer interferometry for screening of deoxynivalenol in wheat and wheat dust

A sample preparation method was developed for the screening of deoxynivalenol (DON) in wheat and wheat dust. Extraction was carried out with water and was successful due to the polar character of DON. For detection, an enzyme-linked immunosorbent assay (ELISA) was compared to the sensor-based techniques of surface plasmon resonance (SPR) and biolayer interferometry (BLI) in terms of sensitivity, affinity and matrix effect. The matrix effects from wheat and wheat dust using SPR were too high to further use this screenings method. The preferred ELISA and BLI methods were validated according to the criteria established in Commission Regulation 519/2014/EC and Commission Decision 2002/657/EC. A small survey was executed on 16 wheat lots and their corresponding dust samples using the validated ELISA method. A linear correlation (r = 0.889) was found for the DON concentration in dust versus the DON concentration in wheat (LOD wheat: 233 g/kg, LOD wheat dust: 458 g/kg)

Resistance to thrombomodulin correlates with liver stiffness in chronic liver disease a prospective single-center cohort study.

INTRODUCTION Chronic liver disease (CLD) is characterized by changes in haemostasis, embracing both hypo- and hypercoagulability. Global hemostatic tests such as thrombin generation assays evaluate the hemostatic balance, to better assess bleeding and thrombotic risks. In addition, procoagulant state in patients with CLD has been demonstrated using modified thrombin generation assays with thrombomodulin, a cofactor for protein C activation. In this study, we prospectively determined thrombin generation and thrombomodulin resistance in patients with CLD staged with liver stiffness measurement (LSM), using both the fully automated analyzer ST Genesia® Thrombin Generation System (STG) and the calibrated automated thrombogram assay (CAT). MATERIALS AND METHODS Demographic, clinical and laboratory characteristics, and blood samples were collected from 65 patients with CLD. Liver stiffness was measured by transient elastography, and thrombin generation and thrombomodulin resistance, by STG and CAT. RESULTS Patients were separated based on LSM of <21 and ≥21 kilopascals (kPa). The propagation rate of thrombin generation was higher in patients with LSM ≥21 kPa and the thrombin generation rate increased as LSM increased. In addition, thrombomodulin resistance assessed by STG and CAT was higher in patients with LSM ≥21 kPa. However, ETP inhibition by activated protein C was comparable in patients with LSM <21 and ≥21 kPa. Finally, LSM correlated with most thrombin generation parameters. CONCLUSION The STG automated system may have value in the assessment of patients with chronic liver disease in the routine coagulation laboratory. LSM ≥21 kPa identify a procoagulant phenotype in these patients, including thrombomodulin resistance

Bioaffinity detection of pathogens on surfaces

The demand for improved technologies capable of rapidly detecting pathogens with high sensitivity and selectivity in complex environments continues to be a significant challenge that helps drive the development of new analytical techniques. Surface-based detection platforms are particularly attractive as multiple bioaffinity interactions between different targets and corresponding probe molecules can be monitored simultaneously in a single measurement. Furthermore, the possibilities for developing new signal transduction mechanisms alongside novel signal amplification strategies aremuchmore varied. In this article, we describe some of the latest advances in the use of surface bioaffinity detection of pathogens. Three major sections will be discussed: (i) a brief overview on the choice of probe molecules such as antibodies, proteins and aptamers specific to pathogens and surface attachment chemistries to immobilize those probes onto various substrates, (ii) highlighting examples among the current generation of surface biosensors, and (iii) exploring emerging technologies that are highly promising and likely to form the basis of the next generation of pathogenic sensors

Nanoparticles in explosives detection – the state-of-the-art and future directions

No abstract available

Recent Progress in Optical Sensors for Biomedical Diagnostics

In recent years, several types of optical sensors have been probed for their aptitude in healthcare biosensing, making their applications in biomedical diagnostics a rapidly evolving subject. Optical sensors show versatility amongst different receptor types and even permit the integration of different detection mechanisms. Such conjugated sensing platforms facilitate the exploitation of their neoteric synergistic characteristics for sensor fabrication. This paper covers nearly 250 research articles since 2016 representing the emerging interest in rapid, reproducible and ultrasensitive assays in clinical analysis. Therefore, we present an elaborate review of biomedical diagnostics with the help of optical sensors working on varied principles such as surface plasmon resonance, localised surface plasmon resonance, evanescent wave fluorescence, bioluminescence and several others. These sensors are capable of investigating toxins, proteins, pathogens, disease biomarkers and whole cells in varied sensing media ranging from water to buffer to more complex environments such as serum, blood or urine. Hence, the recent trends discussed in this review hold enormous potential for the widespread use of optical sensors in early-stage disease prediction and point-of-care testing devices.DFG, 428780268, Biomimetische Rezeptoren auf NanoMIP-Basis zur Virenerkennung und -entfernung mittels integrierter Ansätz

Water-soluble bis(1,10-phenanthroline) Octanedioate Cu2+ and Mn2+ Complexes with Unprecedented Nano and Picomolar in Vitro Cytotoxicity: Promising Leads for Chemotherapeutic Drug Development

Dinuclear CuII and MnII bis-phenanthroline octanedioate complexes exhibit rapid, unprecedented nano and picomolar in vitro cytotoxicity against colorectal cancer lines and are less toxic than cisplatin when examined in vivo. The complexes are potent generators of cellular reactive oxygen species, avid DNA binders and induce O2 dependent cleavage of DNA. The Cu(II) complex was found to have self-cleaving nuclease activity