REVIEW : FABRIKASI MEMBRAN BERBASIS NANOFIBER DENGAN METODE ELECTROSPINNING

AbstrakElectrospinning adalah metode yang efektif dalam fabrikasi membran berbasis nanofiber. Membran nanofiber yang dihasilkan dengan menggunakan metode electrospinning lebih unggul dibandingkan dengan membran konvensional seperti inversi fasa, sintering, dan track etching. Keunggulan tersebut diantaranya memiliki sifat mekanik yang baik dan porositas tinggi (≥90%) dibandingkan membran konvensional yang hanya memiliki porositas 10—20%. Membran nanofiber dapat digunakan pada proses pengolahan air untuk mengatasi masalah krisis air. Proses filtrasi membran terdapat empat tahap diantaranya ultrafiltrasi, mikrofiltrasi, nanofiltrasi, dan reverse osmosis. Karakteristik membran nanofiber dalam aplikasi purifikasi air diantaranya mampu menghalangi garam, bakteri, dan logam berat. dari proses pengolahan air menggunakan membran nanofiber diharapkan memperoleh air dengan kontaminan seminimal mungkin.Kata Kunci: Electrospinning, Membran, NanofiberAbstractElectrospinning is an effective method to fabricate nanofiber based membrane. Nanofiber membrane was produced using the electrospinning method is superior compared to conventional membrane such as phase inversion, sintering, and track etching. The advantages include having good mechanical properties and high porosity (≥90%) compared to conventional membrane which only have 10—20% porosity. Nanofiber membrane can be used in water treatment processes to overcome the water crisis problems. There are four processes of membrane filtration including ultrafiltration, microfiltration, nanofiltration, and reverse osmosis. The characteristics of nanofiber membrane that used in water purification include being able to block salts, bacteria, and heavy metals. The results of the water treatment process using nanofiber membrane is expected to obtain water with minimum contaminants.Keywords: Electrospinning, Membrane, Nanofibe

Nanofiber fabrication in a temperature and humidity controlled environment for improved fibre consistency

To fabricate nanofibers with reproducible characteristics, an important demand for many applications, the effect of controlled atmospheric conditions on resulting electrospun cellulose acetate (CA) nanofibers was evaluated for temperature ranging 17.5 - 35°C and relative humidity ranging 20% - 70%. With the potential application of nanofibers in many industries, especially membrane and filter fabrication, their reproducible production must be established to ensure commercially viability.
Cellulose acetate (CA) solution (0.2 g/ml) in a solvent mixture of acetone/DMF/ethanol (2:2:1) was electrospun into nonwoven fibre mesh with the fibre diameter ranging from 150nm to 1µm.
The resulting nanofibers were observed and analyzed by scanning electron microscopy (SEM), showing a correlation of reducing average fibre diameter with increasing atmospheric temperature. A less pronounced correlation was seen with changes in relative humidity regarding fibre diameter, though it was shown that increased humidity reduced the effect of fibre beading yielding a more consistent, and therefore better quality of fibre fabrication.
Differential scanning calorimetry (DSC) studies observed lower melt enthalpies for finer CA nanofibers in the first heating cycle confirming the results gained from SEM analysis. From the conditions that were explored in this study the temperature and humidity that gave the most suitable fibre mats for a membrane purpose were 25.0°C and 50%RH due to the highest level of fibre diameter uniformity, the lowest level of beading while maintaining a low fibre diameter for increased surface area and increased pore size homogeneity. This study has highlighted the requirement to control the atmospheric conditions during the electrospinning process in order to fabricate reproducible fibre mats

Novel Antibacterial and Toughened Carbon-Fibre/Epoxy Composites by the Incorporation of TiO2 Nanoparticles Modified Electrospun Nanofibre Veils

The inclusion of electrospun nanofiber veils was revealed as an effective method for enhancing the mechanical properties of fiber-reinforced epoxy resin composites. These veils will eventually allow the incorporation of nanomaterials not only for mechanical reinforcement but also in multifunctional applications. Therefore, this paper investigates the effect of electrospun nanofibrous veils made of polyamide 6 modified with TiO2 nanoparticles on the mechanical properties of a carbon-fiber/epoxy composite. The nanofibers were included in the carbon-fiber/epoxy composite as a single structure. The effect of positioning these veils in different composite positions was investigated. Compared to the reference, the use of unmodified and TiO2 modified veils increased the flexural stress at failure and the fracture toughness of composites. When TiO2 modified veils were incorporated, new antibacterial properties were achieved due to the photocatalytic properties of the veils, widening the application area of these composites.This research is funded by the ELKARTEK Programme, “ACTIMAT”, grupos de investigación del sistema universitario vasco (IT718-13), the Spanish government through the project TEC2015-63838-C3-1-R-OPTONANOSENS and from the Basque government through the project KK-2017/00089-µ4F

Efficient dye adsorption by highly porous nanofiber aerogels

Electrospun nanofiber membranes are frequently used in adsorption processes thanks to their high specific surface area, tailored surface functionality, and fiber uniformity. However, they are still facing challenges such as low mechanical stability and unfavorable mass transport properties. In this study, an ultra-light and robust 3D nanofiber aerogel (NFA) or nanofiber sponge with tunable porosity and flexibility was synthesized from short pullulan/polyvinyl alcohol/polyacrylic acid nanofibers using a freeze casting process followed by thermal crosslinking. We demonstrate time the application of such NFAs in batch and continuous adsorption systems and compare their performance with flat nanofiber membranes (NFM). The NFAs proved to be promising adsorbents for cationic dyes due to their high adsorption capacity (383 mg/g) and their reusability. Langmuir isotherm was a suitable model for describing the adsorption process. The endothermic system followed a pseudo second order kinetic model and intra-fiber adsorption is found to be involved in the adsorption process. Dye adsorption by 3D NFAs was four times faster than for the respective flat NFMs and when used in a continuous process as a deep-bed filter, the pressure drop through the NFA was reduced by a factor of 40 while maintaining equal adsorption performance as for the NFM

Electrospinning of Carboxymethyl Chitosan/Polyoxyethylene Oxide Nanofibers for Fruit Fresh-Keeping

Electrospinning provides an effective method for generating nanofibers from solution of carboxymethyl chitosan/polyoxyethylene oxide (CMCS/PEO). The goal of this work is to explore the potential application of electrospun CMCS/PEO nanofiber membrane in fruit fresh-keeping. The microstructure, antibacterial activity, hydrophilia, and air permeability of the nanofiber membrane have been tested. For comparison, the fresh-keeping effects of commercial cling wrap and CMCS/PEO nanofiber membranes on strawberries’ rotting rate and weight loss rate have been studied. The results indicate that the electrospun CMCS/PEO membrane could effectively avoid water loss in strawberries and has a remarkable effect to prolong strawberries’ shelf life due to its breathability and antibacterial activity. In addition, the composite CMCS/PEO, nanofiber membrane is non-poisonous and edible, which can be used in food industry

Molecularly Imprinted Nanofiber Membranes: Localization of Molecular Recognition Sites on the Surface of Nanofiber

Two types of molecularly imprinted nanofiber membrane were fabricated from chitosan, adopting D-phenylalanine (D-Phe) or L-phenylalanine (L-Phe) as a print molecule. Molecularly imprinted nanofiber membranes were fabricated by applying a co-axial, two capillary spinneret so that molecular recognition sites could be localized on the surface of formed nanofiber. Though the effect was not so prominent, the amount of molecular recognition site for nanofibers with localized molecular recognition site (core-shell molecularly imprinted nanofiber membranes) was higher than that with delocalized one (usual molecularly imprinted nanofiber membranes). Those membranes showed permselectivity. The enantiomer preferentially incorporated into membrane was selectively transported

Preparation of Amidoxime Polyacrylonitrile Chelating Nanofibers and Their Application for Adsorption of Metal Ions.

Polyacrylonitrile (PAN) nanofibers were prepared by electrospinning and they were modified with hydroxylamine to synthesize amidoxime polyacrylonitrile (AOPAN) chelating nanofibers, which were applied to adsorb copper and iron ions. The conversion of the nitrile group in PAN was calculated by the gravimetric method. The structure and surface morphology of the AOPAN nanofiber were characterized by a Fourier transform infrared spectrometer (FT-IR) and a scanning electron microscope (SEM), respectively. The adsorption abilities of Cu2+ and Fe3+ ions onto the AOPAN nanofiber mats were evaluated. FT-IR spectra showed nitrile groups in the PAN were partly converted into amidoxime groups. SEM examination demonstrated that there were no serious cracks or sign of degradation on the surface of the PAN nanofibers after chemical modification. The adsorption capacities of both copper and iron ions onto the AOPAN nanofiber mats were higher than those into the raw PAN nanofiber mats. The adsorption data of Cu2+ and Fe3+ ions fitted particularly well with the Langmuir isotherm. The maximal adsorption capacities of Cu2+ and Fe3+ ions were 215.18 and 221.37 mg/g, respectively

Electrospun polyvinyl alcohol/carbon dioxide modified polyethyleneimine composite nanofiber scaffolds

A novel biocompatible polyvinyl alcohol/carbon dioxide modified polyethyleneimine (PVA/PEI-CO2) composite nanofiber was fabricated by a green and facile protocol, which reduces the cytotoxicity of PEI through the surface modification of the PEI with CO2. The 13C NMR spectrum, elemental analysis, and TGA show that CO2 has been incorporated in the PEI surface resulting in a relatively stable structure. The resulting PVA/PEI-CO2 composite nanofibers have been characterized by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), contact angle, and scanning electron microscopy (SEM). The results show that the average diameters of the nanofibers range from 265 ± 53 nm to 423 ± 80 nm. The cytotoxicity of PVA/PEI-CO2 composite nanofibers was assessed by cytotoxicity evaluation using the growth and cell proliferation of normal mice Schwann cells. SEM and the MTT assay demonstrated the promotion of cell growth and proliferation on the PVA/PEI-CO2 composite scaffold. It suggests that PEI-CO2 can have tremendous potential applications in biological material research

Collagen Immobilization on Ultra-thin Nanofiber Membrane to Promote In Vitro Endothelial Monolayer Formation

The endothelialization on the poly (epsilon-caprolactone) nanofiber has been limited due to its low hydrophilicity. The aim of this study was to immobilize collagen on an ultra-thin poly (epsilon-caprolactone) nanofiber membrane without altering the nanofiber structure and maintaining the endothelial cell homeostasis on it. We immobilized collagen on the poly (epsilon-caprolactone) nanofiber using hydrolysis by NaOH treatment and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/sulfo-N-hydroxysulfosuccinimide reaction as a cost-effective and stable approach. NaOH was first applied to render the poly (epsilon-caprolactone) nanofiber hydrophilic. Subsequently, collagen was immobilized on the surface of the poly (epsilon-caprolactone) nanofibers using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/sulfo-N-hydroxysulfosuccinimide. Scanning electron microscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, and fluorescence microscopy were used to verify stable collagen immobilization on the surface of the poly (epsilon-caprolactone) nanofibers and the maintenance of the original structure of poly (epsilon-caprolactone) nanofibers. Furthermore, human endothelial cells were cultured on the collagen-immobilized poly (epsilon-caprolactone) nanofiber membrane and expressed tight junction proteins with the increase in transendothelial electrical resistance, which demonstrated the maintenance of the endothelial cell homeostasis on the collagen-immobilized-poly (epsilon-caprolactone) nanofiber membrane. Thus, we expected that this process would be promising for maintaining cell homeostasis on the ultra-thin poly (epsilon-caprolactone) nanofiber scaffolds.11Ysciescopu