Influence of Acidic pH on Hydrogen and Acetate Production by an Electrosynthetic Microbiome

Production of hydrogen and organic compounds by an electrosynthetic microbiome using electrodes and carbon dioxide as sole electron donor and carbon source, respectively, was examined after exposure to acidic pH (∼5). Hydrogen production by biocathodes poised at −600 mV vs. SHE increased>100-fold and acetate production ceased at acidic pH, but ∼5–15 mM (catholyte volume)/day acetate and>1,000 mM/day hydrogen were attained at pH ∼6.5 following repeated exposure to acidic pH. Cyclic voltammetry revealed a 250 mV decrease in hydrogen overpotential and a maximum current density of 12.2 mA/cm2 at −765 mV (0.065 mA/cm2 sterile control at −800 mV) by the Acetobacterium-dominated community. Supplying −800 mV to the microbiome after repeated exposure to acidic pH resulted in up to 2.6 kg/m3/day hydrogen (≈2.6 gallons gasoline equivalent), 0.7 kg/m3/day formate, and 3.1 kg/m3/day acetate ( = 4.7 kg CO2 captured).</p

Multiphase Methods in Organic Electrosynthesis

© 2019 American Chemical Society. ConspectusWith water providing a highly favored solution environment for industrial processes (and in biological processes), it is interesting to develop water-based electrolysis processes for the synthesis and conversion of organic and biomass-based molecules. Molecules with low solubility in aqueous media can be dispersed/solubilized (i) by physical dispersion tools (e.g., milling, power ultrasound, or high-shear ultraturrax processing), (ii) in some cases by pressurization/supersaturation (e.g., for gases), (iii) by adding cosolvents or "carriers" such as chremophor EL, or (iv) by adding surfactants to generate micelles, microemulsions, and/or stabilized biphasic conditions. This Account examines and compares methodologies to bring the dispersed or multiphase system into contact with an electrode. Both the microscopic process based on individual particle impact and the overall electro-organic transformation are of interest. Distinct mechanistic cases for multiphase redox processes are considered.Most traditional electro-organic transformations are performed in homogeneous solution with reagents, products, electrolyte, and possibly mediators or redox catalysts all in the same (usually organic) solution phase. This may lead to challenges in the product separation step and in the reuse of solvents and electrolytes. When aqueous electrolyte media are used, reagents and products (or even the electrolyte) may be present as microdroplets or nanoparticles. Redox transformations then occur during interfacial "collisions" under multiphase conditions or within a reaction layer when a redox mediator is present. Benefits of this approach can be (i) the use of a highly conducting aqueous electrolyte, (ii) simple separation of products and reuse of the electrolyte, (iii) phase-transfer conditions in redox catalysis, (iv) new reaction pathways, and (v) improved sustainability. In some cases, a surface phase or phase boundary processes can lead to interesting changes in reaction pathways. Controlling the reaction zone within the multiphase redox system poses a challenge, and methods based on microchannel flow reactors have been developed to provide a higher degree of control. However, detrimental effects in microchannel systems are also observed, in particular for limited current densities (which can be very low in microchannel multiphase flow) or in the development of technical solutions for scale-up of multiphase redox transformations.This Account describes physical approaches (and reactor designs) to bring multiphase redox systems into effective contact with the electrode surface as well as cases of important electro-organic multiphase transformations. Mechanistic cases considered are "impacts" by microdroplets or particles at the electrode, effects of dissolved intermediates or redox mediators, and effects of dissolved redox catalysts. These mechanistic cases are discussed for important multiphase transformations for gaseous, liquid, and solid dispersed phases. Processes based on mesoporous membranes and hydrogen-permeable palladium membranes are discussed

Multiphase Methods in Organic Electrosynthesis

ConspectusWith water providing a highly favored solution environment for industrial processes (and in biological processes), it is interesting to develop water-based electrolysis processes for the synthesis and conversion of organic and biomass-based molecules. Molecules with low solubility in aqueous media can be dispersed/solubilized (i) by physical dispersion tools (e.g., milling, power ultrasound, or high-shear ultraturrax processing), (ii) in some cases by pressurization/supersaturation (e.g., for gases), (iii) by adding cosolvents or "carriers" such as chremophor EL, or (iv) by adding surfactants to generate micelles, microemulsions, and/or stabilized biphasic conditions. This Account examines and compares methodologies to bring the dispersed or multiphase system into contact with an electrode. Both the microscopic process based on individual particle impact and the overall electro-organic transformation are of interest. Distinct mechanistic cases for multiphase redox processes are considered.Most traditional electro-organic transformations are performed in homogeneous solution with reagents, products, electrolyte, and possibly mediators or redox catalysts all in the same (usually organic) solution phase. This may lead to challenges in the product separation step and in the reuse of solvents and electrolytes. When aqueous electrolyte media are used, reagents and products (or even the electrolyte) may be present as microdroplets or nanoparticles. Redox transformations then occur during interfacial "collisions" under multiphase conditions or within a reaction layer when a redox mediator is present. Benefits of this approach can be (i) the use of a highly conducting aqueous electrolyte, (ii) simple separation of products and reuse of the electrolyte, (iii) phase-transfer conditions in redox catalysis, (iv) new reaction pathways, and (v) improved sustainability. In some cases, a surface phase or phase boundary processes can lead to interesting changes in reaction pathways. Controlling the reaction zone within the multiphase redox system poses a challenge, and methods based on microchannel flow reactors have been developed to provide a higher degree of control. However, detrimental effects in microchannel systems are also observed, in particular for limited current densities (which can be very low in microchannel multiphase flow) or in the development of technical solutions for scale-up of multiphase redox transformations.This Account describes physical approaches (and reactor designs) to bring multiphase redox systems into effective contact with the electrode surface as well as cases of important electro-organic multiphase transformations. Mechanistic cases considered are "impacts" by microdroplets or particles at the electrode, effects of dissolved intermediates or redox mediators, and effects of dissolved redox catalysts. These mechanistic cases are discussed for important multiphase transformations for gaseous, liquid, and solid dispersed phases. Processes based on mesoporous membranes and hydrogen-permeable palladium membranes are discussed.</p

Bioelectrochemical Reduction Of Carbon Dioxide To Acetate Using A Microbial Consortium Derived From The Cow Rumen

Pure cultures of chemoautotrophic microorganisms have previously been reported to produce acetate from carbon dioxide using reductive electric current. We hypothesized that electrofuel precursors could be produced in a similar manner from a consortium consisting of microbial populations acting as a stable community. This approach might offer improved efficiency and selectivity, greater sustainability, a more diverse group of end products, and more opportunities for community optimization in electrofuel production than is possible with pure cultures. To evaluate this concept, bovine rumen contents were enriched for autotrophic, anaerobic microbes for several generations using hydrogen and carbon dioxide for growth and energy. A stable acetogenic consortium was obtained and aliquots were transferred to the cathode compartments of bioelectrosynthesis cells with reductive electric current supplied to a biocathode by a potentiostat. Current uptake and biofuel precursor production were simultaneously measured over time for periods lasting from several days to several months. Acetate production rates near 3 millimoles per liter of biocathode volume per day were obtained. To evaluate that acetate production was derived solely from bioelectrochemical reduction of carbon dioxide a series of isotopic labeling experiments was performed. Growth medium was prepared using bicarbonate enriched with ten mole percent of 13C-labeled sodium bicarbonate. The 13C/12C isotopic ratios in acetate produced by the consortium growing only when current was provided were found by GC-MS analysis to be consistent with the expectation for acetate production from a carbon source (carbon dioxide or bicarbonate) that contained ten mole percent of a 13C label. This finding supports the hypothesis that acetate production in these bioelectrochemical cells is solely the result of microbial-catalyzed bioelectrochemical reduction of carbon dioxide / bicarbonate

Electrochemical synthesis of organic compounds using CO2 and biomass as feedstock

Le CO2 et la biomasse sont abondants dans la nature. La conversion de ces deux éléments constitutifs en carburants ou en produits chimiques à valeur ajoutée par des méthodes électrochimiques est essentielle pour atténuer la crise énergétique et réduire la pollution de l'environnement, ainsi que pour atteindre la carbone neutralité. Au cours des dernières décennies, de nombreux efforts ont été consacrés à ce domaine, mais la plupart d'entre eux se concentrent sur la conception de catalyseurs et l'amélioration des performances, et seules quelques recherches se concentrent sur de nouvelles réactions ou sur le mécanisme de ces réactions. Ici, nous développons une série de nouvelles réactions et étudions les mécanismes de ces réactions en utilisant la spectroscopie in situ, les principaux résultats sont les suivants : 1) Les réactions de réduction du furfural ont été menées en utilisant une feuille de Cu électrochimique comme catalyseur, et l'alcool furfural (FA, efficacité faradique, FE : 43,0%) et le 2-méthylfurane (MF, FE : 57,5%) ont été obtenus après électrolyse sous -0,43V (par rapport à l'électrode à hydrogène réversible, RHE). Les effets des différentes facettes du catalyseur sur la sélectivité ont été étudiés, et le Cu (110) produit préférentiellement de l'AF, tandis que les défauts sont les sites actifs pour la formation de MF. La spectroscopie Raman operando a montré que la production de FA et de MF partage le même intermédiaire à l'étape initiale, avec différents sites actifs conduisant aux différentes voies entre les étapes intermédiaires et suivantes et générant différents produits. 2) Des produits de liaison C-N (acétamide et formamide) ont été obtenus par la réaction de réduction du CO2 (CO2RR) avec la combinaison du substrat NH3 et des électrocatalyseurs commerciaux à base de nanoparticules de Cu ou de CuO. Avec l'optimisation, la FE maximale de ces deux produits est de ~10% au total, et la meilleure condition de réaction est 50mg Cu NPs, 1M KOH, avec 0.3M NH3, à -0.78V (vs. RHE) pendant 30 mins. L'IR in situ a montré que la formation de formamide et de formate partage le même intermédiaire, et que la production d'acétamide et d'acétate subit une voie de réaction similaire. 3) L'hydroxyméthanesulfonate (HMS), le sulfoacétate (SA) et le méthanesulfonate (produits de liaison C-S, FE représente 6% au total) ont été obtenus par le couplage CO2RR avec l'ajout de sulfite (SO32-), et des NPs de Cu2O synthétisées par la méthode de chimie humide ont été utilisées comme électrocatalyseurs. Parmi ces trois composés à liaison C-S, le HMS est le principal produit, la FE pouvant atteindre un maximum de 6 %. Le XRD in situ a montré que Cu0 est l'espèce active pour le processus de couplage C-S. Les calculs operando Raman et DFT ont montré que *CHOH est l'intermédiaire clé dans la formation de la liaison C-S, et que le couplage entre *CHOH et SO32- est l'étape qui détermine le taux.CO2 and biomass are abundant in nature. Conversion of these two building blocks into fuels or value-added chemicals by electrochemical methods is essential for alleviating the energy crisis and reducing environmental pollution, and achieving carbon neutrality. In the past few decades, much effort has been devoted to this field, but most of this focuses on the design of catalysts and improvement of the performances, and only few research thrusts focus on new reactions or the mechanism of these reactions. Herein, we develop a series of new reactions and investigate the mechanisms of these reactions by using in-situ spectroscopy, the main results are shown as follows: 1) Furfural reduction reactions were conducted by using an electrochemical roughed Cu foil as the catalyst, and furfural alcohol (FA, Faradaic efficiency, FE: 43.0%) and 2-methylfuran (MF, FE: 57.5%) were obtained after electrolysis under -0.43V (vs. reversible hydrogen electrode, RHE). The effects of different facets on the selectivity were investigated, and Cu (110) is preferential to produce FA, while defects are the active sites for the formation of MF. Operando Raman spectrum showed that the production of FA and MF share the same intermediate at the initial stage, with different active sites leading to the pathway differential on the intermediate of the following steps and generating different products. 2) C-N bond products (acetamide and formamide) were obtained by CO2 reduction reaction (CO2RR) with the combination of NH3 reactants and commercial Cu or CuO nanoparticle (NPs) electrocatalysts. The maximum FE of these two products is ~ 10% in total. With optimization, we found a higher pH, thicker catalyst layer, and larger size of cations are beneficial to the production of acetamide. This can be attributed to the higher production of C2 intermediate and further leads to a higher FE of acetamide. In-situ IR showed that the formation of formamide and formate share the same intermediate, and the production of acetamide and acetate undergoes a similar reaction pathway. The mechanism can help to design the new next generation catalyst with a higher efficiency, which is beneficial to the future application of this reaction in chemical industry. Nitrate and nitrite are used instead of ammonia as nitrogen sources to produce C-N bond compounds, which suggests that this reaction provides a new possibility for organic synthesis. In all, this reaction expands the scope of the CO2RR application, and is also good for the development of organic synthesis. 3) Hydroxymethanesulfonate (HMS), sulfoacetate (SA) and methanesulfonate (C-S bond products, FE is 6% in total) were obtained by coupling CO2RR with the addition of sulfite (SO32-), and Cu2O NPs which synthesized by the wet chemistry method were used as electrocatalysts. Among these three C-S bond compounds, HMS is the main product, FE can reach 6% maximum. In-situ XRD showed that Cu0 is the active species for C-S coupling process. Operando Raman and DFT calculation further showed that *CHOH is the key intermediate in the C-S bond formation, and the coupling between *CHOH and SO32- is the rate-determining step. The discovery of reaction intermediates opens up the possibility of designing highly efficient catalysts, which can promote the application of this reaction in real industries. Also, this reaction provides a new possibility to synthesize C-S bond products, which have the potential to partially replace traditional organic synthetic routes with greener and more sustainable procedures

Energy Conversion and Utilization Technologies Program (ECUT) electrocatalysis research

The general field of electrocatalysis, from both the technical and business standpoints is accessed and research areas and approaches most likely to lead to substantial energy/cost savings are identified. The overall approach was to compile and evaluate available information, relying heavily on inputs/recommendations of research managers and technical personnel in responsible positions in industry and at universities. Some promising approaches identified to date include the use of transition metal compounds as electrocatalysts and the use of the new electrochemical photocapacitance spectroscopy (EPS) technique for electrocatalyst characterization/development. For the first time, an oxygen electrocatalyst based on the K2NiF4 structure was synthesized, investigated and compared with a perovskite analog. Results show that this class of materials, based on Ni(3+), forms very efficient and stable O2 anodes in basic solution and suggest that other structure-types be examined in this regard. The very difficult problem of dinitrogen and carbon dioxide electroreductions is addressed through the use of biological model systems which can mimic the enzyme processes in nature

Electrochemical Deconstructive Methoxylation of Arylalcohols – A Synthetic and Mechanistic Investigation

Herein, we report a mechanistic investigation of a recently developed electrochemical method for the deconstructive methoxylation of arylalcohols. A combination of synthetic, electroanalytical, and computational experiments have been performed to gain a deeper understanding of the reaction mechanism and the structural requirements for fragmentation to occur. It was found that 2-arylalcohols undergo anodic oxidation to form the corresponding aromatic radical cations, which fragment to form oxocarbenium ions and benzylic radical intermediates via mesolytic cleavage, with further anodic oxidation and trapping of the benzylic carbocation with methanol to generate the observed methyl ether products. It was also found that the electrochemical fragmentation of 2-arylalkanols is promoted by structural features that stabilize the oxocarbenium ions and/or benzylic radical intermediates formed upon mesolytic cleavage of the aromatic radical cations. With an enhanced understanding of the reaction mechanism and the structural features that promote fragmentation, it is anticipated that alternative electrosynthetic transformations will be developed that utilize this powerful, yet underdeveloped, mode of substrate activation