Hybridizing Triboelectrification and Electromagnetic Induction Effects for High-Efficient Mechanical Energy Harvesting

The recently introduced triboelectric nanogenerator (TENG) and the traditional electromagnetic induction generator (EMIG) are coherently integrated in one structure for energy harvesting and vibration sensing/isolation. The suspended structure is based on two oppositely oriented magnets that are enclosed by hollow cubes surrounded with coils, which oscillates in response to external disturbance and harvests mechanical energy simultaneously from triboelectrification and electromagnetic induction. It extends the previous definition of hybrid cell to harvest the same type of energy with multiple approaches. Both the sliding-mode TENG and contact-mode TENG can be achieved in the same structure. In order to make the TENG and EMIG work together, transformers are used to match the output impedance between these two power sources with very different characteristics. The maximum output power of 7.7 and 1.9 mW on the same load of 5 kΩ was obtained for the TENG and EMIG, respectively, after impedance matching. Benefiting from the rational design, the output signal from the TENG and the EMIG are in phase. They can be added up directly to get an output voltage of 4.6 V and an output current of 2.2 mA in parallel connection. A power management circuit was connected to the hybrid cell, and a regulated voltage of 3.3 V with constant current was achieved. For the first time, a logic operation was carried out on a half-adder circuit by using the hybrid cell working as both the power source and the input digit signals. We also demonstrated that the hybrid cell can serve as a vibration isolator. Further applications as vibration dampers, triggers, and sensors are all promising

Performance Boosting of Flexible ZnO UV Sensors with Rational Designed Absorbing Antireflection Layer and Humectant Encapsulation

Flexible ZnO thin film UV sensors with 3 orders of magnitude improvement in sensitivity and 2 orders of magnitude acceleration in speed are realized via light absorption efficiency enhancement and surface encapsulation. Devices are constructed on polyethylene substrate incorporating morphology controlled ZnO nanorod arrays (NRAs) as absorbing antireflection layers. By adjusting the morphology of ZnO NRAs, the light absorptance exceeds 99% through effectively trapping incident photons. As a result, the sensitivity of the UV sensor reaches 109 000. Moreover, a mechanism of competitive chemisorption between O₂ and H₂O at oxygen vacancy sites is proposed to explain the phenomenon of the speed acceleration in moist environment. A new approach of humectant encapsulation is used to make H₂O participant rapid processes dominant for speed acceleration. Two orders of magnitude speed enhancement in reset time is achieved by polyethylene glycol encapsulation. After a total 3000 cycles bending test, the decay in the responsivity of UV sensor is within 20%, indicating good mechanical stability. All these results not only demonstrate a simple, effective and scalable approach to fabricate high sensitive and fast response flexible ZnO UV sensors, but also provide meaningful references for performance boosting of photoelectronic devices based on other oxide semiconductors

Triboelectric Nanogenerator Built on Suspended 3D Spiral Structure as Vibration and Positioning Sensor and Wave Energy Harvester

An unstable mechanical structure that can self-balance when perturbed is a superior choice for vibration energy harvesting and vibration detection. In this work, a suspended 3D spiral structure is integrated with a triboelectric nanogenerator (TENG) for energy harvesting and sensor applications. The newly designed vertical contact–separation mode TENG has a wide working bandwidth of 30 Hz in low-frequency range with a maximum output power density of 2.76 W/m² on a load of 6 MΩ. The position of an in-plane vibration source was identified by placing TENGs at multiple positions as multichannel, self-powered active sensors, and the location of the vibration source was determined with an error less than 6%. The magnitude of the vibration is also measured by the output voltage and current signal of the TENG. By integrating the TENG inside a buoy ball, wave energy harvesting at water surface has been demonstrated and used for lighting illumination light, which shows great potential applications in marine science and environmental/infrastructure monitoring

Temperature Dependence of the Piezotronic Effect in ZnO Nanowires

A comprehensive investigation was carried out on n-type ZnO nanowires for studying the temperature dependence of the piezotronic effect from 77 to 300 K. In general, lowering the temperature results in a largely enhanced piezotronic effect. The experimental results show that the behaviors can be divided into three groups depending on the carrier doping level or conductivity of the ZnO nanowires. For nanowires with a low carrier density (<10¹⁷/cm³ at 77 K), the pieozotronic effect is dominant at low temperature for dictating the transport properties of the nanowires; an opposite change of Schottky barrier heights at the two contacts as a function of temperature at a fixed strain was observed for the first time. At a moderate doping (between 10¹⁷/cm³ and 10¹⁸/cm³ at 77 K), the piezotronic effect is only dominant at one contact, because the screening effect of the carriers to the positive piezoelectric polarization charges at the other end (for n-type semiconductors). For nanowires with a high density of carriers (>10¹⁸/cm³ at 77 K), the piezotronic effect almost vanishes. This study not only proves the proposed fundamental mechanism of piezotronic effect, but also provides guidance for fabricating piezotronic devices

Segmentally Structured Disk Triboelectric Nanogenerator for Harvesting Rotational Mechanical Energy

We introduce an innovative design of a disk triboelectric nanogenerator (TENG) with segmental structures for harvesting rotational mechanical energy. Based on a cyclic in-plane charge separation between the segments that have distinct triboelectric polarities, the disk TENG generates electricity with unique characteristics, which have been studied by conjunction of experimental results with finite element calculations. The role played by the segmentation number is studied for maximizing output. A distinct relationship between the rotation speed and the electrical output has been thoroughly investigated, which not only shows power enhancement at high speed but also illuminates its potential application as a self-powered angular speed sensor. Owing to the nonintermittent and ultrafast rotation-induced charge transfer, the disk TENG has been demonstrated as an efficient power source for instantaneously or even continuously driving electronic devices and/or charging an energy storage unit. This work presents a novel working mode of TENGs and opens up many potential applications of nanogenerators for harvesting even large-scale energy

Segmentally Structured Disk Triboelectric Nanogenerator for Harvesting Rotational Mechanical Energy

We introduce an innovative design of a disk triboelectric nanogenerator (TENG) with segmental structures for harvesting rotational mechanical energy. Based on a cyclic in-plane charge separation between the segments that have distinct triboelectric polarities, the disk TENG generates electricity with unique characteristics, which have been studied by conjunction of experimental results with finite element calculations. The role played by the segmentation number is studied for maximizing output. A distinct relationship between the rotation speed and the electrical output has been thoroughly investigated, which not only shows power enhancement at high speed but also illuminates its potential application as a self-powered angular speed sensor. Owing to the nonintermittent and ultrafast rotation-induced charge transfer, the disk TENG has been demonstrated as an efficient power source for instantaneously or even continuously driving electronic devices and/or charging an energy storage unit. This work presents a novel working mode of TENGs and opens up many potential applications of nanogenerators for harvesting even large-scale energy

Segmentally Structured Disk Triboelectric Nanogenerator for Harvesting Rotational Mechanical Energy

We introduce an innovative design of a disk triboelectric nanogenerator (TENG) with segmental structures for harvesting rotational mechanical energy. Based on a cyclic in-plane charge separation between the segments that have distinct triboelectric polarities, the disk TENG generates electricity with unique characteristics, which have been studied by conjunction of experimental results with finite element calculations. The role played by the segmentation number is studied for maximizing output. A distinct relationship between the rotation speed and the electrical output has been thoroughly investigated, which not only shows power enhancement at high speed but also illuminates its potential application as a self-powered angular speed sensor. Owing to the nonintermittent and ultrafast rotation-induced charge transfer, the disk TENG has been demonstrated as an efficient power source for instantaneously or even continuously driving electronic devices and/or charging an energy storage unit. This work presents a novel working mode of TENGs and opens up many potential applications of nanogenerators for harvesting even large-scale energy

Pyroelectric Nanogenerators for Harvesting Thermoelectric Energy

Harvesting thermoelectric energy mainly relies on the Seebeck effect that utilizes a temperature difference between two ends of the device for driving the diffusion of charge carriers. However, in an environment that the temperature is spatially uniform without a gradient, the pyroelectric effect has to be the choice, which is based on the spontaneous polarization in certain anisotropic solids due to a time-dependent temperature variation. Using this effect, we experimentally demonstrate the first application of pyroelectric ZnO nanowire arrays for converting heat energy into electricity. The coupling of the pyroelectric and semiconducting properties in ZnO creates a polarization electric field and charge separation along the ZnO nanowire as a result of the time-dependent change in temperature. The fabricated nanogenerator has a good stability, and the characteristic coefficient of heat flow conversion into electricity is estimated to be ∼0.05–0.08 Vm²/W. Our study has the potential of using pyroelectric nanowires to convert wasted energy into electricity for powering nanodevices

Ultrahigh Sensitive Piezotronic Strain Sensors Based on a ZnSnO₃ Nanowire/Microwire

We demonstrated a flexible strain sensor based on ZnSnO₃ nanowires/microwires for the first time. High-resolution transmission electron microscopy indicates that the ZnSnO₃ belongs to a rhombohedral structure with an <i>R</i>3<i>c</i> space group and is grown along the [001] axis. On the basis of our experimental observation and theoretical calculation, the characteristic <i>I</i>–<i>V</i> curves of ZnSnO₃ revealed that our strain sensors had ultrahigh sensitivity, which is attributed to the piezopotential-modulated change in Schottky barrier height (SBH), that is, the piezotronic effect. The on/off ratio of our device is ∼587, and a gauge factor of 3740 has been demonstrated, which is 19 times higher than that of Si and three times higher than those of carbon nanotubes and ZnO nanowires

High-Performance Carbon Nanotube Complementary Electronics and Integrated Sensor Systems on Ultrathin Plastic Foil

The longtime vacancy of high-performance complementary metal-oxide-semiconductor (CMOS) technology on plastics is a non-negligible obstacle to the applications of flexible electronics with advanced functions, such as continuous health monitoring with <i>in situ</i> signal processing and wireless communication capabilities, in which high speed, low power consumption, and complex functionality are desired for integrated circuits (ICs). Here, we report the implementation of carbon nanotube (CNT)-based high-performance CMOS technology and its application for signal processing in an integrated sensor system for human body monitoring on ultrathin plastic foil with a thickness of 2.5 μm. The performances of both the p- and n-type CNT field-effect transistors (FETs) are excellent and symmetric on plastic foil with a low operation voltage of 2 V: width-normalized transconductances (<i>g</i>_m/<i>W</i>) as high as 4.69 μS/μm and 5.45 μS/μm, width-normalized on-state currents reaching 5.85 μA/μm and 6.05 μA/μm, and mobilities up to 80.26 cm²·V^–1·s^–1 and 97.09 cm²·V^–1·s^–1, respectively, together with a current on/off ratio of approximately 10⁵. The devices were mechanically robust, withstanding a curvature radius down to 124 μm. Utilizing these transistors, various high-performance CMOS digital ICs with rail-to-rail output and a ring oscillator on plastics with an oscillation frequency of 5 MHz were demonstrated. Furthermore, an ultrathin skin-mounted humidity sensor system with <i>in situ</i> frequency modulation signal processing capability was realized to monitor human body sweating