Phenolic Constituents of Shea (<i>Vitellaria paradoxa</i>) Kernels

Analysis of the phenolic constituents of shea (Vitellaria paradoxa) kernels by LC-MS revealed eight catechin compoundsgallic acid, catechin, epicatechin, epicatechin gallate, gallocatechin, epigallocatechin, gallocatechin gallate, and epigallocatechin gallateas well as quercetin and trans-cinnamic acid. The mean kernel content of the eight catechin compounds was 4000 ppm (0.4% of kernel dry weight), with a 2100−9500 ppm range. Comparison of the profiles of the six major catechins from 40 Vitellaria provenances from 10 African countries showed that the relative proportions of these compounds varied from region to region. Gallic acid was the major phenolic compound, comprising an average of 27% of the measured total phenols and exceeding 70% in some populations. Colorimetric analysis (101 samples) of total polyphenols extracted from shea butter into hexane gave an average of 97 ppm, with the values for different provenances varying between 62 and 135 ppm of total polyphenols. Keywords: Shea butter; green tea catechins; gallic acid; LC-MS; antioxidants; Afric

Solubilization of Nutraceuticals into Reverse Hexagonal Mesophases

The solubilization of four bioactive molecules with different polarities, in three reverse hexagonal (HII) systems has been investigated. The three HII systems were a typical reverse hexagonal composed of glycerol monooleate (GMO)/tricaprylin/water and two fluid hexagonal systems containing either 2.75 wt % Transcutol or ethanol as a fourth component. The phase behavior of the liquid crystalline phases in the presence of ascorbic acid, ascorbyl palmitate, d-α-tocopherol and d-α-tocopherol acetate were determined by small-angle X-ray scattering (SAXS) and optical microscopy. Differential scanning calorimetry (DSC) and Fourier-transform infrared (FT-IR) techniques were utilized to follow modifications in the thermal behavior and in the vibrations of different functional groups upon solubilizing the bioactive molecules. The nature of each guest molecule (in both geometry and polarity) together with the different HII structures (typical and fluids) determined the corresponding phase behavior, swelling or structural transformations and its location in the HII structures. Ascorbic acid was found to act as a chaotropic guest molecule, localized in the water-rich core and at the interface. The AP was also a chaotropic guest molecule with its head located in the vicinity of the GMO headgroup while its tail embedded close to the surfactant tail. d-α-tocopherol and d-α-tocopherol acetate were incorporated between the GMO tails; however, the d-α-tocopherol was located closer to the interface. Once Transcutol or ethanol was present and upon guest molecule incorporation, partial migration was detected

Complex Dendrimer–Lyotropic Liquid Crystalline Systems: Structural Behavior and Interactions

The incorporation of dendrimer into three lyotropic liquid crystalline (LLCs) mesophases is demonstrated for the first time. A second generation (G2) of poly(propylene imine) dendrimer (PPI) was solubilized into lamellar, diamond reverse cubic, and reverse hexagonal LLCs composed of glycerol monooleate (GMO), and water (and d-α-tocopherol in the HII system). The combination of PPI with LLCs may provide an advantageous drug delivery system. Cross-polarized light microscope, small-angle X-ray scattering (SAXS), and attenuated total reflectance Fourier transform infrared (ATR-FTIR) were utilized to study the structural behavior of the mesophases, the localization of PPI within the system, and the interactions between the guest molecule and the system’s components. It was revealed that PPI-G2 functioned as a “water pump”, competing with the lipid headgroups for water binding. As a result, Lα→HII and Q224→HII structural shifts were detected (at 10 wt % PPI-G2 content), probably caused by the dehydration of monoolein headgroups and subsequent increase of the lipid’s critical packing parameter (CPP). In the case of HII, as a result of the balance between the dehydration of the monoolein headgroups and the significant presence of PPI within the interfacial region, increasing the quantity of hydrogen bonds, no structural transitions occurred. ATR-FTIR analysis demonstrated a downward shift of the H–O–H (water), as a result of PPI-G2 embedment, suggesting an increase in the mean water–water H-bond angle resulting from binding PPI-G2 to the water network. Additionally, the GMO hydroxyl groups at β- and γ-C–OH positions revealed a partial interaction of hydrogen bonds with N–H functional groups of the protonated PPI-G2. Other GMO interfacial functional groups were shown to interact with the PPI-G2, in parallel with the GMO dehydration phenomenon. In the future, these outcomes can be used to design advanced drug delivery systems, allowing administration of dendrimers as a therapeutic agent from LLCs

NMR Chromatography Using Microemulsion Systems

NMR spectroscopy is an excellent tool for structural analysis of pure compounds. However, for mixtures, it performs poorly because of overlapping signals. Diffusion ordered NMR spectroscopy (DOSY) can be used to separate the spectra of compounds with widely differing molecular weights, but the separation is usually insufficient. NMR “chromatographic” methods have been developed to increase the diffusion separation but these usually introduced solids into the NMR sample that reduce resolution. Using nanostructured dispersed media, such as microemulsions, eliminates the need for suspensions of solids and brings NMR chromatography into the mainstream of NMR analytical techniques. DOSY was used in this study to resolve spectra of mixtures with no increase in line-width as compared to regular solutions. Components of a mixture are differentially dissolved into the separate phases of the microemulsions. Several examples of previously reported microemulsions and those specifically developed for this purpose were used here. These include a fully dilutable microemulsion, a fluorinated microemulsion, and a fully deuterated microemulsion. Log(diffusion) difference enhancements of up to 1.7 orders of magnitude were observed for compounds that have similar diffusion rates in conventional solvents. Examples of commercial pharmaceutical drugs were also analyzed via this new technique, and the spectra of up to six components were resolved from one sample

Unit Cell Structure of Water-Filled Monoolein into Inverted Hexagonal (H_II) Mesophase Modeled by Molecular Dynamics

The study investigates the unit cell structure of inverted hexagonal (HII) mesophase composed of monoolein (1-monoolein, GMO) and water using atomistic molecular dynamics methods without imposing any restraints on lipid and water molecules. Statistically meaningful and very contrast images of the radial mass density distribution, scrutinizing also the separate components water, monoolein, the polar headgroups of the lipids, the double bond, and the termini of the hydrocarbon chain (the tail), are obtained. The lipid/water interface structure is analyzed based on the obtained water density distribution, on the estimated number of hydrogen bonds per monoolein headgroup, and on the headgroup–water radial distribution functions. The headgroup mass density distribution demonstrates hexagonal shape of the monoolein/water interface that is well-defined at higher water/monoolein ratios. Water interacts with the headgroups by forming a three-layer diffusive mass density distribution, and each layer’s shape is close to hexagonal, which is an indication of long-range structural interactions. It is found that the monoolein headgroups form a constant number of hydrogen bonds leaving an excessive amount of water molecules outside the first lipid coordination sphere. Furthermore, the quantity of water at the monoolein/water interface increases steadily upon extension of the unit cell, so the interface should have a very dynamic structure. Investigation of the hydrocarbon residues reveals high compression and well-expressed structuring of the tails. The tails form a very compressed and constrained structure of defined layers across the unit cell with properties corresponding to a more densely packed nonpolar liquid (oil). Due to the hexagonal shape the 2D packing frustration is constant and does not depend on the water content. All reported structural features are based on averaging of the atomic coordinates over the time-length of the simulation trajectories. That kind of processing allows the observation of the water/GMO interface shape and its stability and mobility at a time scale close to the ones of the intermolecular interactions

HIV-TAT Enhances the Transdermal Delivery of NSAID Drugs from Liquid Crystalline Mesophases

Sodium diclofenac (Na-DFC) and celecoxib (CLXB) are common nonsteroidal anti-inflammatory (NSAID) drugs which suffer from poor bioavailability and severe side effects when consumed orally, and their transdermal delivery might present important advantages. In this study, the drugs were solubilized in cubic and lamellar mesophases as transdermal delivery vehicles, and a cell-penetrating peptide, HIV-TAT (TAT), was examined as a skin penetration enhancer. SD-NMR, ATR-FTIR, and EPR measurements revealed that, in the cubic mesophase (which is rich in water content), TAT populates the aqueous cores and binds water, while in the dense lamellar system (with the lower water content) TAT is bound also to the glycerol monooleate (GMO) and increases the microviscosity and the order degree. TAT secondary structure in the cubic system was found to be a random coil while once it was embedded in the closely packed lamellar system it transforms to a more ordered compact state of β-turns arranged around the GMO headgroups. TAT remarkably increased the diffusion of Na-DFC and CLXB from the cubic systems by 6- and 9-fold enhancement, respectively. TAT effect on drug diffusion from the lamellar systems was limited to an increase of 1.3- and 1.7-fold, respectively. The dense packing and strong binding in the lamellar phase led to slow diffusion rates and slower drug release in controlled pattern. These effects of the chemical composition and vehicle geometry on drug diffusion are demonstrated with the impacts of TAT which can be specifically utilized for controlling skin delivery of drugs as required

Crystallization of Carbamazepine Pseudopolymorphs from Nonionic Microemulsions

Crystallization of carbamazepine (CBZ), an antiepileptic drug, precipitated from confined spaces of nonionic microemulsions was investigated. The study was aimed to correlate the structure of the microemulsion [water-in-oil (W/O), bicontinuous, and oil-in-water (O/W)] with the crystalline structure and morphology of solid CBZ. The precipitated CBZ was studied by DSC, TGA, powder XRD, single-crystal XRD, SEM, and optical microscopy. The results suggest that the microstructure of the microemulsions influences the crystallization process and allows crystallizing polymorphs that exhibit different crystal structure and habits. W/O nanodroplets orient the crystallizing CBZ molecules to form a prismlike anhydrous polymorphic form with monoclinic unit cell and P21/n space group. Bicontinuous structures lead to platelike dihydrate crystals with orthorhombic unit cell and Cmca space group. The O/W nanodroplets cause the formation of needlelike dihydrate crystals with monoclinic unit cell and P21/c space group. The morphological features of solid CBZ remain predetermined by the basic symmetry and parameters of its unit cell. Precipitation of CBZ pseudopolymorphs from supersaturated microemulsion is discussed in terms of oriented attachment that provides perfect packing of numerous separately nucleated ordered nuclei of CBZ into microscale platelets and then into macroscopic crystals. Crystallization from microemulsion media enabling one to obtain the drug (CBZ) with predicted structure and morphology should be of great significance for pharmaceutical applications

Hexosome and Hexagonal Phases Mediated by Hydration and Polymeric Stabilizer

In this research, we studied the factors that control formation of GMO/tricaprylin/water hexosomes and affect their inner structure. As a stabilizer of the soft particles dispersed in the aqueous phase, we used the hydrophilic nonionic triblock polymer Pluronic 127. We demonstrate how properties of the hexosomes, such as size, structure, and stability, can be tuned by their internal composition, polymer concentration, and processing conditions. The morphology and inner structure of the hexosomes were characterized by small-angle X-ray scattering, cryo-transmission electron microscope, and dynamic light scattering. The physical stability (to creaming, aggregation, and coalescence) of the hexosomes was further examined by the LUMiFuge technique. Two competing processes are presumed to take place during the formation of hexosomes:  penetration of water from the continuous phase during dispersion, resulting in enhanced hydration of the head groups, and incorporation of the polymer chains into the hexosome structure while providing a stabilizing surface coating for the dispersed particles. Hydration is an essential stage in lyotropic liquid crystal (LLC) formation. The polymer, on the other hand, dehydrates the lipid heads, thereby introducing disorder into the LLC and reducing the domain size. Yet, a critical minimum polymer concentration is necessary in order to form stable nanosized hexosomes. These competing effects require the attention of those preparing hexosomes. The competition between these two processes can be controlled. At relatively high polymer concentrations (1−1.6 wt % of the total formulation of the soft particles), the hydration process seems to occur more rapidly than polymer adsorption. As a result, smaller and more stable soft particles with high symmetry were formed. On the other hand, when the polymer concentration is fixed at lower levels (<1.0 wt %), the homogenization process encourages only partial polymer adsorption during the dispersion process. This adsorption is insufficient; hence, maximum hydration of the surfactant head group is reached prior to obtaining full adsorption, resulting in the formation of less ordered hexosomes of larger size and lower stability

Hexosome and Hexagonal Phases Mediated by Hydration and Polymeric Stabilizer

In this research, we studied the factors that control formation of GMO/tricaprylin/water hexosomes and affect their inner structure. As a stabilizer of the soft particles dispersed in the aqueous phase, we used the hydrophilic nonionic triblock polymer Pluronic 127. We demonstrate how properties of the hexosomes, such as size, structure, and stability, can be tuned by their internal composition, polymer concentration, and processing conditions. The morphology and inner structure of the hexosomes were characterized by small-angle X-ray scattering, cryo-transmission electron microscope, and dynamic light scattering. The physical stability (to creaming, aggregation, and coalescence) of the hexosomes was further examined by the LUMiFuge technique. Two competing processes are presumed to take place during the formation of hexosomes:  penetration of water from the continuous phase during dispersion, resulting in enhanced hydration of the head groups, and incorporation of the polymer chains into the hexosome structure while providing a stabilizing surface coating for the dispersed particles. Hydration is an essential stage in lyotropic liquid crystal (LLC) formation. The polymer, on the other hand, dehydrates the lipid heads, thereby introducing disorder into the LLC and reducing the domain size. Yet, a critical minimum polymer concentration is necessary in order to form stable nanosized hexosomes. These competing effects require the attention of those preparing hexosomes. The competition between these two processes can be controlled. At relatively high polymer concentrations (1−1.6 wt % of the total formulation of the soft particles), the hydration process seems to occur more rapidly than polymer adsorption. As a result, smaller and more stable soft particles with high symmetry were formed. On the other hand, when the polymer concentration is fixed at lower levels (<1.0 wt %), the homogenization process encourages only partial polymer adsorption during the dispersion process. This adsorption is insufficient; hence, maximum hydration of the surfactant head group is reached prior to obtaining full adsorption, resulting in the formation of less ordered hexosomes of larger size and lower stability