Immobilization of Rose Waste Biomass for Uptake of Pb(II) from Aqueous Solutions

Rosa centifolia and Rosa gruss an teplitz distillation waste biomass was immobilized using sodium alginate for Pb(II) uptake from aqueous solutions under varied experimental conditions. The maximum Pb(II) adsorption occurred at pH 5. Immobilized rose waste biomasses were modified physically and chemically to enhance Pb(II) removal. The Langmuir sorption isotherm and pseudo-second-order kinetic models fitted well to the adsorption data of Pb(II) by immobilized Rosa centifolia and Rosa gruss an teplitz. The adsorbed metal is recovered by treating immobilized biomass with different chemical reagents (H2SO4, HCl and H3PO4) and maximum Pb(II) recovered when treated with sulphuric acid (95.67%). The presence of cometals Na, Ca(II), Al(III), Cr(III), Cr(VI), and Cu(II), reduced Pb(II) adsorption on Rosa centifolia and Rosa gruss an teplitz waste biomass. It can be concluded from the results of the present study that rose waste can be effectively used for the uptake of Pb(II) from aqueous streams

A Transcriptomic Appreciation of Childhood Meningococcal and Polymicrobial Sepsis from a Pro-Inflammatory and Trajectorial Perspective, a Role for Vascular Endothelial Growth Factor A and B Modulation?

This study investigated the temporal dynamics of childhood sepsis by analyzing gene expression changes associated with proinflammatory processes. Five datasets, including four meningococcal sepsis shock (MSS) datasets (two temporal and two longitudinal) and one polymicrobial sepsis dataset, were selected to track temporal changes in gene expression. Hierarchical clustering revealed three temporal phases: early, intermediate, and late, providing a framework for understanding sepsis progression. Principal component analysis supported the identification of gene expression trajectories. Differential gene analysis highlighted consistent upregulation of vascular endothelial growth factor A (VEGF-A) and nuclear factor κB1 (NFKB1), genes involved in inflammation, across the sepsis datasets. NFKB1 gene expression also showed temporal changes in the MSS datasets. In the postmortem dataset comparing MSS cases to controls, VEGF-A was upregulated and VEGF-B downregulated. Renal tissue exhibited higher VEGF-A expression compared with other tissues. Similar VEGF-A upregulation and VEGF-B downregulation patterns were observed in the cross-sectional MSS datasets and the polymicrobial sepsis dataset. Hexagonal plots confirmed VEGF-R (VEGF receptor)–VEGF-R2 signaling pathway enrichment in the MSS cross-sectional studies. The polymicrobial sepsis dataset also showed enrichment of the VEGF pathway in septic shock day 3 and sepsis day 3 samples compared with controls. These findings provide unique insights into the dynamic nature of sepsis from a transcriptomic perspective and suggest potential implications for biomarker development. Future research should focus on larger-scale temporal transcriptomic studies with appropriate control groups and validate the identified gene combination as a potential biomarker panel for sepsis

Photocatalytic degradation of antibiotics via exploitation of magnetic nanocomposite: a green nanotechnology approach towards drug-contaminated wastewater reclamation

In the quest for eco-conscious innovations, this research was designed for the sustainable synthesis of magnetite (Fe3O4) nanoparticles, using ferric chloride hexahydrate salt as a precursor and extract of Eucalyptus globulus leaves as both a reducing and capping agent, which are innovatively applied as a photocatalyst for the photocatalytic degradation of antibiotics “ciprofloxacin and amoxicillin”. Sugar cane bagasse biomass, sugar cane bagasse pyrolyzed biochar, and magnetite/sugar cane bagasse biochar nanocomposite were also synthesized via environmentally friendly organized approaches. The optimum conditions for the degradation of ciprofloxacin and amoxicillin were found to be pH 6 for ciprofloxacin and 5 for amoxicillin, dosage of the photocatalyst (0.12 g), concentration (100 mg/L), and irradiation time (240 min). The maximum efficiencies of percentage degradation for ciprofloxacin and amoxicillin were found to be (73.51%) > (63.73%) > (54.57%) and (74.07%) > (61.55%) > (50.66%) for magnetic nanocomposites, biochar, and magnetic nanoparticles, respectively. All catalysts demonstrated favorable performance; however, the “magnetite/SCB biochar” nanocomposite exhibited the most promising results among the various catalysts employed in the photocatalytic degradation of antibiotics. Kinetic studies for the degradation of antibiotics were also performed, and notably, the pseudo-first-order chemical reaction showed the best results for the degradation of antibiotics. Through a comprehensive and comparative analysis of three unique photocatalysts, this research identified optimal conditions for efficient treatment of drug-contaminated wastewater, thus amplifying the practical significance of the findings. The recycling of magnetic nanoparticles through magnetic separation, coupled with their functional modification for integration into composite materials, holds significant application potential in the degradation of antibiotics

Biosorption of chromium (III) and chromium (VI) by untreated and pretreated Cassia fistula biomass from aqueous solutions

The present study explained the effect of pretreatments on the biosorption of Cr (III) and Cr (VI) by Cassia fistula biomass from aqueous solutions. For this purpose Cassia fistula biomass was pretreated physically by heating, autoclaving, boiling and chemically with sodium hydroxide, formaldehyde, gluteraldehyde, acetic acid, hydrogen peroxide, commercial laundry detergent, orthophosphoric, sulphuric acid, nitric acid, and hydrochloric acid. The adsorption capacity of biomass for Cr (III) and Cr (VI) was found to be significantly improved by the treatments of gluteraldehyde (95.41 and 96.21 mg/g) and benzene (85.71 and 90.81 mg/g) respectively. The adsorption capacity was found to depend on pH, initial metal concentration, dose, size, kinetics, and temperature. Maximum adsorption of both the Cr (III) and Cr (VI) was observed at pH 5 and 2. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. The kinetic studies showed that the sorption rates could be described better by a second order expression than by a more commonly applied Lagergren equation

Biochar caged zirconium ferrite nanocomposites for the adsorptive removal of Reactive Blue 19 dye in a batch and column reactors and conditions optimizaton

Abstract Biochar caged zirconium ferrite (BC-ZrFe2O5) nanocomposites were fabricated and their adsorption capacity for Reactive Blue 19 (RB19) dye was evaluated in a fixed-bed column and batch sorption mode. The adsorption of dye onto BC-ZrFe2O5 NCs followed pseudo-second-order kinetics (R 2 = 0.998) and among isotherms, the experimental data was best fitted to Sips model as compared to Freundlich and Langmuir isotherms models. The influence of flow-rate (3–5 mL min−1), inlet RB19 dye concentration (20–100 mg L−1) and quantity of BC-ZrFe2O5 NCs (0.5–1.5 g) on fixed-bed sorption was elucidated by Box-Behnken experimental design. The saturation times (C t /C o  = 0.95) and breakthrough (C t /C o  = 0.05) were higher at lower flow-rates and higher dose of BC-ZrFe2O5 NCs. The saturation times decreased, but breakthrough was increased with the initial RB19 dye concentration. The treated volume was higher at low sorbent dose and influent concentration. Fractional bed utilization (FBU) increased with RB19 dye concentration and flow rates at low dose of BC-ZrFe2O5 NCs. Yan model was fitted best to breakthrough curves data as compared to Bohart-Adams and Thomas models. Results revealed that BC-ZrFe2O5 nanocomposite has promising adsorption efficiency and could be used for the adsorption of dyes from textile effluents.</jats:p

The use of Neem biomass for the biosorption of zinc from aqueous solutions

An adsorbent was developed from mature leaves and stem bark of the Neem (Azadirachta indica) tree for removing zinc from water. Adsorption was carried out in a batch process with several different concentrations of zinc by varying pH. The uptake of metal was very fast initially, but gradually slowed down indicating penetration into the interior of the adsorbent particles. The data showed that optimum pH for efficient biosorption of zinc by Neem leaves and stem bark was 4 and 5, respectively. The maximum adsorption capacity showed that the Neem biomass had a mass capacity for zinc (147.08 mg Zn/g for Neem leaves and 137.67 mg Zn/g Neem bark). The experimental results were analyzed in terms of Langmuir and Freundlich isotherms. The adsorption followed pseudo-second-order kinetic model. The thermodynamic assessment of the metal ion-Neem tree biomass system indicated the feasibility and spontaneous nature of the process and Delta G degrees values were evaluated as ranging from -26.84 to -32.75 (Neem leaves) kJ/mol and -26.04 to -29.50 (Neem bark) kJ/mol for zinc biosorption. Due to its outstanding zinc uptake capacity, the Neem tree was proved to be an excellent biomaterial for accumulating zinc from aqueous solutions. (C) 2008 Elsevier B.V. All rights reserved

Synthesis, Characterization, and Evaluation of Antimicrobial and Antioxidant Potential of &lt;i&gt;Polyalthia longifolia&lt;/i&gt; Mediated Copper Nanoparticles

Synthesis of nanoparticles of transition metals by using medicinal plants has been outstreched in recent years because of the characteristic features which are embodied in the end product. This work is proceded with the aim to synthesize and optimize copper nanoparticles (CuNPs-Pl) using aqueous extract of Polyalthia longifolia leaves (PlL) for characterization and evaluation of antimicrobial and antioxidant potential. The synthesis of CuNPs-Pl was confirmed by visual inspection of the dark brown residues in the reaction flask and via absorption band around 580nm by UV/Visible spectroscopy. Synthesis process was optimized through investigation of environmental variables. FTIR analysis was carried out for both PIL and CuNPs-Pl which identified the presence of alkanes, alcoholic, and aldehydic groups in the PlL and their encapsulation on the copper surface. The synthesized CuNPs-Pl were found to be spherical and rod shaped, and polydispersed when investigated through SEM study. Similarly, these nanoparticles had monoclinic structure and crystalline nature when analyzed by XRD. Moreover, these nanoparticles showed metallic form when EDX examination was done. Further, biological activities were performed. The synthesized nanoparticles showed considerable inhibition zones against Escherichia coli (12mm), Bacillus subtilis (11mm), Aspergillus niger (10mm), and Schyzophyllum commune (16mm) which depicted their powerful antibacterial and antifungal activity. Likewise, CuNPs-Pl were effeciently able to quench free radicals as indicated from the 2, 2-diphenyl-1-picrylhydrazyl (DPPH), hydrogen peroxide (H2O2), and nitric oxide (NO) assays by exhibiting 86.32, 50.45, and 48.23% inhibition respectively. Thus, the contemporary work has substantiated that low cost CuNPs-Pl can be highly proficient alternate or substitute of synthetic formulations.</jats:p