Selective Ion Transport through Functionalized Graphene Membranes Based on Delicate Ion–Graphene Interactions

Recently, graphene oxide (GO) membranes have been reported with the ability to separate different solutes in aqueous suspensions by a molecular sieving effect. On the other hand, we propose that the chemical interactions between ions and GO membranes might also take effect in selective ion transmembrane transportation. In this paper, on the basis of the permeation of Cu²⁺ and Mg²⁺ sources through hydroxyl-, carboxyl-, and amino-functionalized graphene membranes, the delicate ion–graphene interactions which might be responsible for the selective ion permeation are investigated. We demonstrate experimentally that the coordination between transition-metal cations and carboxyl functionalities and the cation−π interactions between main-group cations and sp² regions are responsible for the selective transport of small ions through graphene-based membranes, which is beyond the scope of molecular sieving effect proposed previously. Notably, by grafting amino groups onto the graphene basal planes, the permeations of Cu²⁺ and Mg²⁺ cations are both weakened. These results not only throw light upon the mechanism for the selective ion permeation through graphene-based membranes but also lay a foundation for the separation of target ions by grafting specific functionalities

Cellulose-Templated Graphene Monoliths with Anisotropic Mechanical, Thermal, and Electrical Properties

Assembling particular building blocks into composites with diverse targeted structures has attracted considerable interest for understanding its new properties and expanding the potential applications. Anisotropic organization is considered as a frequently used targeted architecture and possesses many peculiar properties because of its unusual shapes. Here, we show that anisotropic graphene monoliths (AGMs), three-dimensional architectures of well-aligned graphene sheets obtained by a dip-coating method using cellulose acetate fibers as templates show thermal-insulating, fire-retardant, and anisotropic properties. They exhibit a feature of higher mechanical strength and thermal/electrical conductivities in the axial direction than in the radial direction. Elastic polymer resins are then introduced into the pores of the AGMs to form conductive and flexible composites. The composites, as AGMs, retain the unique anisotropic properties, revealing opposite resistance change under compressions in different directions. The outstanding anisotropic properties of AGMs make them possible to be applied in the fields of thermal insulation, integrated circuits, and electromechanical devices

Cellulose-Templated Graphene Monoliths with Anisotropic Mechanical, Thermal, and Electrical Properties

Assembling particular building blocks into composites with diverse targeted structures has attracted considerable interest for understanding its new properties and expanding the potential applications. Anisotropic organization is considered as a frequently used targeted architecture and possesses many peculiar properties because of its unusual shapes. Here, we show that anisotropic graphene monoliths (AGMs), three-dimensional architectures of well-aligned graphene sheets obtained by a dip-coating method using cellulose acetate fibers as templates show thermal-insulating, fire-retardant, and anisotropic properties. They exhibit a feature of higher mechanical strength and thermal/electrical conductivities in the axial direction than in the radial direction. Elastic polymer resins are then introduced into the pores of the AGMs to form conductive and flexible composites. The composites, as AGMs, retain the unique anisotropic properties, revealing opposite resistance change under compressions in different directions. The outstanding anisotropic properties of AGMs make them possible to be applied in the fields of thermal insulation, integrated circuits, and electromechanical devices

Cellulose-Templated Graphene Monoliths with Anisotropic Mechanical, Thermal, and Electrical Properties

Assembling particular building blocks into composites with diverse targeted structures has attracted considerable interest for understanding its new properties and expanding the potential applications. Anisotropic organization is considered as a frequently used targeted architecture and possesses many peculiar properties because of its unusual shapes. Here, we show that anisotropic graphene monoliths (AGMs), three-dimensional architectures of well-aligned graphene sheets obtained by a dip-coating method using cellulose acetate fibers as templates show thermal-insulating, fire-retardant, and anisotropic properties. They exhibit a feature of higher mechanical strength and thermal/electrical conductivities in the axial direction than in the radial direction. Elastic polymer resins are then introduced into the pores of the AGMs to form conductive and flexible composites. The composites, as AGMs, retain the unique anisotropic properties, revealing opposite resistance change under compressions in different directions. The outstanding anisotropic properties of AGMs make them possible to be applied in the fields of thermal insulation, integrated circuits, and electromechanical devices

Broadband High-Performance Infrared Antireflection Nanowires Facilely Grown on Ultrafast Laser Structured Cu Surface

Infrared antireflection is an essential issue in many fields such as thermal imaging, sensors, thermoelectrics, and stealth. However, a limited antireflection capability, narrow effective band, and complexity as well as high cost in implementation represent the main unconquered problems, especially on metal surfaces. By introducing precursor micro/nano structures via ultrafast laser beforehand, we present a novel approach for facile and uniform growth of high-quality oxide semiconductor nanowires on a Cu surface via thermal oxidation. Through the enhanced optical phonon dissipation of the nanowires, assisted by light trapping in the micro structures, ultralow total reflectance of 0.6% is achieved at the infrared wavelength around 17 μm and keeps steadily below 3% over a broad band of 14–18 μm. The precursor structures and the nanowires can be flexibly tuned by controlling the laser processing procedure to achieve desired antireflection performance. The presented approach possesses the advantages of material simplicity, structure reconfigurability, and cost-effectiveness for mass production. It opens a new path to realize unique functions by integrating semiconductor nanowires onto metal surface structures

Small Temperature Coefficient of Resistivity of Graphene/Graphene Oxide Hybrid Membranes

Materials with low temperature coefficient of resistivity (TCR) are of great importance in some areas, for example, highly accurate electronic measurement instruments and microelectronic integrated circuits. In this work, we demonstrated the ultrathin graphene–graphene oxide (GO) hybrid films prepared by layer-by-layer assembly with very small TCR (30–100 °C) in the air. Electrical response of the hybrid films to temperature variation was investigated along with the progressive reduction of GO sheets. The mechanism of electrical response to temperature variation of the hybrid film was discussed, which revealed that the interaction between graphene and GO and the chemical doping effect were responsible for the tunable control of its electrical response to temperature variation. The unique properties of graphene–GO hybrid film made it a promising candidate in many areas, such as high-end film electronic device and sensor applications

Crack-Initiated Durable Low-Adhesion Trilayer Icephobic Surfaces with Microcone-Array Anchored Porous Sponges and Polydimethylsiloxane Cover

Reducing unfavorable ice accretion on surfaces exposed in cold environment requires effective passive anti-icing/deicing techniques. Icephobic surfaces are widely applied on various infrastructures due to their low ice adhesion strength and flexibility, whereas their poor mechanical durability, common liquid infusion, weak resistance to contamination, and low bonding strength to substrates are the major remaining challenges. According to the fracture mechanics of ice layer, initiating cracks at the ice-solid interfaces via the proper design of internal structures of icephobic materials is a promising way to icephobicity. Herein, a crack initiating icephobic surface with porous PDMS sponges sandwiched between a protective, dense PDMS layer and a textured metal microstructure was proposed and fabricated. The combination of high- and low- stiffness PDMS layers anchored by the structured metal surface give the sandwich-like structure excellent icephobicity with both high durability and low ice adhesion (5.3 kPa in the icing–deicing cycles). The porosity and the elastic modulus of the PDMS sponges and the periodicity of the metal surface structures can both be tailored to realize enhanced icephobicity. The sandwich-like icephobic surface remained insignificantly changed under solid particle impacting and the durability characterized via linear abrasion tests was elevated compared with PDMS coating on flat metal surfaces. Additionally, the trilayer icephobic surface possesses durability, low ice adhesion strength, and improved resistance to contamination and is applicable on various surfaces

Cassie-State Stability of Metallic Superhydrophobic Surfaces with Various Micro/Nanostructures Produced by a Femtosecond Laser

The Cassie-state stability plays a vital role in the applications of metallic superhydrophobic surfaces. Although a large number of papers have reported the superhydrophobic performance of various surface micro/nanostructures, the knowledge of which kind of micro/nanostructure contributes significantly to the Cassie-state stability especially under low temperature and pressure is still very limited. In this article, we fabricated six kinds of typical micro/nanostructures with different topography features on metal surfaces by a femtosecond laser, and these surfaces were modified by fluoro­alkyl­silane to generate super­hydro­phobicity. We then systematically studied the Cassie-state stability of these surfaces by means of condensation and evaporation experiments. The results show that some superhydrophobic surfaces, even with high contact angles and low sliding angles under normal conditions, are unstable under low temperature or external pressure. The Cassie state readily transits to a metastable state or even a Wenzel state under these conditions, which deteriorates their superhydrophobicity. Among the six micro/nanostructures, the densely distributed nanoscale structure is important for a stable Cassie state, and the closely packed micrometer-scale structure can further improve the stability. The dependence of the Cassie-state stability on the fabricated micro/nanostructures and the laser-processing parameters is also discussed. This article clarifies optimized micro/nanostructures for stable and thus more practical metallic superhydrophobic surfaces

Anisotropic Hemiwicking Behavior on Laser Structured Prismatic Microgrooves

The wicking phenomenon, including wicking and hemiwicking, has attracted increasing attention for its critical importance to a wide range of engineering applications, such as thermal management, water harvesting, fuel cells, microfluidics, and biosciences. There exists a more urgent demand for anisotropic wicking behaviors since an increasing number of advanced applications are significantly complex. For example, special-shaped vapor chambers and heating atomizers in some electronic cigarettes need liquid replenishing with various velocities in different directions. Here, we report two-dimensional anisotropic hemiwicking behaviors with elliptical shapes on laser structured prismatic microgrooves. The prismatic microgrooves were fabricated via one-step femtosecond laser direct writing, and the anisotropic hemiwicking behaviors were observed when utilizing glycerol, glycol, and water as the test liquid. Specifically, the ratios of horizontal wicking distance in directions along short and long axes were tan 0°, tan 15°, tan 30°, and tan 45° for samples with cross-angles of 0°, 30°, 60°, and 90°, respectively. The vertical water wicking front displayed corresponding angles under the guidance of laser structured prismatic microgrooves. Theoretical analysis shows that the wicking distance is mainly dependent on the cross-angle θ and surface roughness, in which the wicking distance is proportional to cos­(θ/2). Driven by the capillary pressure forming in the narrow microgrooves, the liquid initially filled the valleys of microgrooves and then surrounded and covered the prismatic ridges with laser-induced nanoparticles. The abundant nanoparticles increased the surface roughness, leading to the enhancement of wicking performance, which was further evidenced by the larger wicking speed of the sample with more nanoparticles. The mechanism of anisotropic hemiwicking behaviors revealed in this work paves the way for wicking control, and the proposed prismatic microgrooved surfaces with two-dimensional anisotropic hemiwicking performance and superhydrophilicity could serve in a broad range of applications, especially for the advanced thermal management with specific heat load configurations