290 research outputs found
PAY-AS-YOU-SPEED: AN ECONOMIC FIELD-EXPERIMENT
We report a vehicle-fleet experiment with an economic incentive given to car drivers for keeping within speed limits. A pay-as-you-speed traffic insurance scheme was simulated with a monthly participation bonus that was reduced by a non-linear speeding penalty. Actual speed was monitored by a GPS in-vehicle device. Participating drivers were randomly assigned into two-by two treatment groups, with different participation-bonus and penalty levels, and two control groups (high and low participation bonus, but no penalty). A third control group consists of drivers with the same technical equipment who did not participate but whose driving could be monitored. We evaluate changes in behaviour from twelve-month differences in proportion of driving time per month that the car was exceeding the maximum allowed speed on the road. We find that the participating drivers significantly reduced severe speeding violations during the first experiment month, while in the second experiment month, after having received feedback reports with an account of earned payments, only those participating subjects that were given a speeding penalty reduced severe speed violations. We find no significant effects from the size of the participation bonus (high vs. low), or the size of the penalty (high vs. low rate).Traffic insurance; traffic safety; Intelligent Transport Systems; ITS; Intelligent Speed Adaptation; ISA
On the appropriate use of (input-output) coefficients to generate non-survey regional input-output tables: Implications for the determination of output multipliers
Regional input-output (IO) tables are constructed as either scaled down versions of national tables or by means of surveys. In the first type, location quotients (LQ) usually use employment structures to account for differences between nation and region. A LQ is designed to scale down national (input-output) coefficients to representative regional ones that are then used to derive regional multiplier effects. In this process there are two main approaches to define regional coefficients. The first one relies on national technological coefficients that show the use of inputs regardless of origin. In the second approach, regional coefficients are derived from national trade coefficients which allow distinguishing the source of origin of used intermediate inputs. Therefore, it is important to be aware of both the implicit effects of the design of LQ's and the implications of applying a LQ to a specific coefficient. The question of relying on national technology or trade coefficients seems to have been a neglected topic in the area of regionalizing input-output tables (Hewings and Jensen, 1986). Jensen et al. (1979), in development of the GRIT regionalization method, favors reallocation of imports to create technological coefficients before applying LQ's. Flegg and Webber (1997) on the other hand apply their quotient to the trade coefficients: "Whilst Hewings and Jensen's analysis is certainly helpful [...]. We are not convinced that it would be desirable to apply LQ's to the national technological coefficients." In this paper we show why traditional LQ's are not designed to scale down tables of technological coefficients and how regional multipliers will generally be overestimated. Six regionalizations are conducted based on three LQ's and both types of coefficients. It makes a great difference what coefficient the location quotients are applied to. If the target is a regional table of intra-regional flows, it is not possible to apply currently available LQ's to a table of technological coefficients. Because of their design, location quotients are not able to capture the absolute imports necessary in the regional production processes. In many cases national technological coefficients will be accepted as regional trade coefficients and regional multipliers will be overestimated
Recent progress in the measurement of external costs and implications for transport pricing reforms
The external cost of transport has been discussed in the European transport policy since the 60s. However, it was not until the mid-90s that the European Commission decided on a pricing policy for the transport sector. This policy has stimulated a wide array of new research on the external cost of transport. A survey of some of the most recent studies in the area displays a clear picture; the latest studies are clearly focused on the marginal external cost and based on detailed bottom-up methods. The paper summarise the methods used to estimate some of the components of the marginal cost of transport - marginal infrastructure cost, congestion and scarcity cost, accident and environmental cost. The survey displays the huge variation in the estimates that follows from the use of more detailed databases. While this may be perceived as a problem for blunt pricing policies the paper suggests that it highlights the need for a more refined pricing policy in the transport sector
Linkages: economic analysis of agriculture in the wider economy
This thesis consists of five papers, each contributing to an understanding of the role of agriculture in the wider economy, with particular emphasis on evaluation of the common agricultural policy (CAP). The first of these papers investigates the economic linkages between agriculture and the wider economy in Sweden. We develop a method for disaggregating the agricultural sector in the Swedish input-output (IO) table. Output multipliers are generally higher for livestock sectors compared to crop production and range between 1.52 and 2.20 for the open model. In the second study we develop a method for overcoming the aggregation bias associated with aggregated IO tables. Aggregation bias can be as large as 5-6 percent for agricultural sectors in a Swedish region and can be dealt with using limited and more available data to construct a disaggregated IO shock. We demonstrate how such an approach can be used for modelling reforms to the CAP. This approach minimises bias without the time and money required to do a full disaggregation of agriculture. The third paper deal with non-survey IO regionalisation. We reveal that the foundations are weak for applying standard location quotients to tables of indirect allocation of imports, so called technological coefficients. We demonstrate the sensitivity in regional multiplier analysis from doing so, using six different regional IO tables. Even the location quotient that scale down national IO coefficients the most show on average 12 percent higher regional multipliers when national technological coefficients are adjusted, rather than national trade coefficients. The fourth paper investigates the scope of hybrid governance in relation to agri-environmental and rural development policies of the CAP. We combine a survey, a case study and a stakeholder discussion and show benefits in both process and outcome that could possibly be utilised to a larger extent in implementing and developing the policy. In the fifth and final study we investigated the role of agricultural policies, specifically the environmental and rural development policies of the CAP, in promoting sustainable rural development. 20 stakeholder interviews were performed to evaluate the possibilities for agriculture and current policies to fulfil this role. One result is that environmental programs support many aspects of rural development, for instance by making some types of diversification possible
Agricultureâs inter-industry linkages, aggregation bias and rural policy reforms
As agricultural policy reform and its effects have become increasingly territorialised, analyses which attempt to explain or predict impacts need to be more localised but also identify spillover effects. In addition to the predictions of policy shocks predicted by sectoral partial equilibrium models, local and regional general equilibrium approaches which establish the wider effects of such policy shocks have become popular. However, these neglect a major, underexplored difficulty: agriculture is usually described as a single sector in input-output accounts, whereas policy shocks with differential impacts have effects on other industries which are different to those implied by average input-output coefficients. Regionalisation of aggregated input-output tables adds further to these difficulties. The objective of this paper is to develop a relatively simple method for dealing with these problems. It establishes the theoretical basis for aggregation bias and shows how it can be measured, in two contrasting case study regions in the United Kingdom and Sweden. Having established that this is a significant problem, a simple but effective procedure is demonstrated, based on additional information on variable costs, which transforms policy shocks from a direct change in agricultural output to that transmitted to the suppliers of inputs. This method provides an impact close to that which could be calculated if the general equilibrium system had indeed been disaggregated, and supports use of this approach in impact studies where the researcher does not have the time or funding available for completely disaggregating the agricultural sectorâs regional accounts.agricultural and rural development policy evaluation, CAP, input-output analysis, aggregation bias, Agricultural and Food Policy,
Economic Growth and the Dynamics of Wage Determination: A Micro Simulation Study of the Stability Consequences of Deficient Variation in Factor Prices and Micro Structures
Swedish Manufacturing Industry is said to be technologically and commercially in good shape. While Swedish wage levels were higher than in all industrial countries in the mid-70s, wages - expressed in international currencies - have now dropped to a mid-position, and real rates of return are back to the average for the postwar period. Given what empirical research on Swedish labor market behavior tells us, the large devaluation in late 1982 should have been followed by strong wage drift. However, to understand recruitment and wage setting decisions, one really needs a model in which firm pricing, production and investment decisions are controlled by overriding profitability objectives and where the rate of interest plays a role. The Swedish micro-to-macro model is such a model
Policy strategies for vehicle electrification
An increase in the market share of electric vehicles is one possible policy strategy for greenhouse gas (GHG) abatement. Many governments have introduced schemes to increase the market uptake - fiscal incentives, subsidies and various regulatory policies such as support for charging stations, free parking facilities or access to restricted road lanes as well as R&D funding. A number of partial studies do exist, but the comprehensive comparative study on the effect of these different incentives has yet to be done. Based on the experience until today it is, however, possible to explore the policy options
Willingness to Pay and Sensitivity to Time Framing: A Theoretical Analysis and an Application on Car Safety
Stated preference (SP) surveys attempt to obtain monetary values for non-market goods that reflect individualsâ âtrueâ preferences. Numerous empirical studies suggest that monetary values from SP studies are sensitive to survey design and so may not reflect respondentsâ true preferences. This study examines the effect of time framing on respondentsâ willingness to pay (WTP) for car safety.We explore how WTP per unit risk reduction depends on the time period over which respondents pay and face reduced risk in a theoretical model and by using data from a Swedish contingent valuation survey. We find that WTP is sensitive to time framing; the theoretical model predicts that the effect is likely to be nontrivial, and empirical estimates from an annual scenario are about 70 percent higher than estimates from a monthly scenario.Car safety, Contingent valuation, Time frame, Willingness to pay
Pay-as-you-speed: Two Field Experiments on Controlling Adverse Selection and Moral Hazard in Traffic Insurance
Around one million people are killed world wide every year in road-traffic accidents. The risks and consequences of accidents increase progressively with speed, which ultimately is determined by the individual driver. The behaviour of the motorist thus affects both her own and other peoples safety. Internalisation of external costs of road transport has hitherto been focused on distance-based taxes or insurance premiums. While these means, as they are designed today, may affect driven distance, they have no influence on driving behaviour. This paper argues that by linking on-board positioning systems to insurance premiums it is possible to reward careful driving and get drivers to self select into different risk categories depending on their compliance to speed limits. We report two economic field experiments that have tested ways to induce car-owners to have technical platforms installed in their vehicle in order to affect the extent of speeding. It is demonstrated that a bonus to remunerate those that have the device installed, tantamount to a lower insurance premium, increases drivers?propensity to accept the technical devices. In a second experiment the size of the bonus is made dependent on the actual frequency of speeding. We find that this is a second way to discipline users to drive at legal speeds.Traffic safety, impure public goods, moral hazard, adverse selection, self selection
- âŠ