X-Ray Spectral Variability in Cygnus X-1

Spectral variability in different energy bands of X-rays from Cyg X-1 in different states is studied with RXTE observations and time domain approaches. In the hard tail of energy spectrum above $\sim 10$ keV, average peak aligned shots are softer than the average steady emission and the hardness ratio decreases when the flux increases during a shot for all states. In regard to a soft band lower $\sim 10$ keV, the hardness in the soft state varies in an opposite way: it peaks when the flux of the shot peaks. For the hard and transition states, the hardness ratio in respect to a soft band during a shot is in general lower than that of the steady component and a sharp rise is observed at about the shot peak. For the soft state, the correlation coefficient between the intensity and hardness ratio in the hard tail is negative and decreases monotonically as the timescale increases from 0.01 s to 50 s, which is opposite to that in regard to a soft band. For the hard and transition states, the correlation coefficients are in general negative and have a trend of decrease with increasing timescale.Comment: 14 pages, 3 figures, accepted by Ap

Covariant description of shape evolution and shape coexistence in neutron-rich nuclei at N\approx60

The shape evolution and shape coexistence phenomena in neutron-rich nuclei at $N\approx60$, including Kr, Sr, Zr, and Mo isotopes, are studied in the covariant density functional theory (DFT) with the new parameter set PC-PK1. Pairing correlations are treated using the BCS approximation with a separable pairing force. Sharp rising in the charge radii of Sr and Zr isotopes at N=60 is observed and shown to be related to the rapid changing in nuclear shapes. The shape evolution is moderate in neighboring Kr and Mo isotopes. Similar as the results of previous Hartree-Fock-Bogogliubov (HFB) calculations with the Gogny force, triaxiality is observed in Mo isotopes and shown to be essential to reproduce quantitatively the corresponding charge radii. In addition, the coexistence of prolate and oblate shapes is found in both $^{98}$Sr and $^{100}$Zr. The observed oblate and prolate minima are related to the low single-particle energy level density around the Fermi surfaces of neutron and proton respectively. Furthermore, the 5-dimensional (5D) collective Hamiltonian determined by the calculations of the PC-PK1 energy functional is solved for $^{98}$Sr and $^{100}$Zr. The resultant excitation energy of $0^+_2$ state and E0 transition strength $\rho^2(E0;0^+_2\rightarrow0^+_1)$ are in rather good agreement with the data. It is found that the lower barrier height separating the two competing minima along the $\gamma$ deformation in $^{100}$Zr gives rise to the larger $\rho^2(E0;0^+_2\rightarrow0^+_1)$ than that in $^{98}$Sr.Comment: 1 table, 11 figures, 23 page

Positivity-preserving H∞ model reduction for positive systems

This is the post-print version of the Article - Copyright @ 2011 ElevierThis paper is concerned with the model reduction of positive systems. For a given stable positive system, our attention is focused on the construction of a reduced-order model in such a way that the positivity of the original system is preserved and the error system is stable with a prescribed H∞ performance. Based upon a system augmentation approach, a novel characterization on the stability with H∞ performance of the error system is first obtained in terms of linear matrix inequality (LMI). Then, a necessary and sufficient condition for the existence of a desired reduced-order model is derived accordingly. Furthermore, iterative LMI approaches with primal and dual forms are developed to solve the positivity-preserving H∞ model reduction problem. Finally, a compartmental network is provided to show the effectiveness of the proposed techniques.The work was partially supported by GRF HKU 7137/09E

Anisotropy of the in-plane angular magnetoresistance of electron-doed Sr1-xLaxCuO2 thin films

Signatures of antiferromagnetism (AF) in the underdoped Ln2-xCexCuO4 (Ln = Nd, Pr,...) family are observed even for doping levels for which superconductivity exists. We have looked for a similar property in a different electron-doped cuprate family, Sr1-xLaxCuO2, which consists of CuO2 planes separated by Sr/La atoms, and is exempt of the possible influence of magnetic rare earth ions. We report in-plane magnetoresistance measurements in the normal state of underdoped, superconducting, c-axis oriented, epitaxial Sr1-xLaxCuO2 thin films. This probe is sensitive to spin arrangement and we find that the in-plane magnetoresistance, which is negative and does not saturate for T, exhibits an angular dependence when measured upon rotating a magnetic field within the CuO2 planes. The analysis reveals a superposition of fourfold and twofold angular oscillations. Both of these increase in amplitude with increasing field and decreasing and appear below a temperature, which gets higher with decreasing doping levels. Our results demonstrate that these magnetoresistance oscillations, also observed for the Ln2-xCexCuO4 (Ln = Nd, Pr,...) family and attributed to an AF signature, are, without ambiguity, a property of CuO2 planes. Besides, these oscillations vary with doping in an unusual way compared to previous results: fourfold oscillations are essentially present in the more underdoped samples while only twofold oscillations are visible in the less underdoped ones. This intriguing observation appears to be a consequence of spin dilution with increasing doping level.Comment: 25 pages, 6 figure

Evaluation of ASTER GDEM ver2 using GPS measurements and SRTM ver4.1 in China

The freely available ASTER GDEM ver2 was released by NASA and METI on October 17, 2011. As one of the most complete high resolution digital topographic data sets of the world to date, the ASTER GDEM covers land surfaces between 83°N and 83°S at a spatial resolution of 1 arc-second and will be a useful product for many applications, such as relief analysis, hydrological studies and radar interferometry. The stated improvements in the second version of ASTER GDEM benefit from finer horizontal resolution, offset adjustment and water body detection in addition to new observed ASTER scenes. This study investigates the absolute vertical accuracy of the ASTER GDEM ver2 at five study sites in China using ground control points (GCPs) from high accuracy GPS benchmarks, and also using a DEM-to-DEM comparison with the Consultative Group for International Agriculture Research Consortium for Spatial Information (CGIAR-CSI) SRTM DEM (Version 4.1). And then, the results are separated into GlobCover land cover classes to derive the spatial pattern of error. It is demonstrated that the RMSE (19m) and mean (-13m) values of ASTER GDEM ver2 against GPS-GCPs in the five study areas is lower than its first version ASTER GDEM ver1 (26m and -21m) as a result of the adjustment of the elevation offsets in the new version. It should be noted that the five study areas in this study are representative in terms of terrain types and land covers in China, and even for most of mid-latitude zones. It is believed that the ASTER GDEM offers a major alternative in accessibility to high quality elevation data

The IT performance evaluation in the construction industry

To date there has been limited published work in the construction management and engineering literature that has provided empirical evidence to demonstrate that IT can improve organizational performance. Without an explicit understanding about how IT can be effectively used to improve organizational performance, its justification will remain to be weak for managers. To ensure the continuous increase in IT based applications in the construction industry, sufficient evidence has to be provided for management in various professions of the construction industry to evaluate, allocate and utilize appropriate IT systems. In an attempt to explore the relationship between IT and productivity, an empirical investigation of 60 Professional Consulting Firms (PCF) from the Hong Kong construction industry was undertaken. A model for determining the organizational productivity of IT is proposed, and the methodology used to test the model is described. The findings are analyzed and a cross-profession comparison of the results indicated the differences in the use of IT. The research findings are discussed with similarities being drawn. The limitations of the research are then presented and discussed. The implications of the findings and conclusions then fully presented