1,661 research outputs found
Variable geometry manned orbital vehicle Patent
Variable geometry manned orbital vehicle having high aerodynamic efficiency over wide speed range and incorporating auxiliary pivotal wing
Agronomic Management of Indigenous Mycorrhizas
Many of the advantages conferred to plants by arbuscular mycorrhiza (AM) are associated to the ability of AM plants to explore a greater volume of soil through the extraradical mycelium. Sieverding (1991) estimates that for each centimetre of colonized root there is an increase of 15 cm3 on the volume of soil explored, this value can increase to 200 cm3 depending on the circumstances. Due to the enhancement of the volume of soil explored and the ability of the extraradical mycelium to absorb and translocate nutrients to the plant, one of the most obvious and important advantages resulting from mycorrhization is the uptake of nutrients. Among of which the ones that have immobilized forms in soil, such as P, assume particular significance. Besides this, many other benefits are recognized for AM plants (Gupta et al, 2000): water stress alleviation (Augé, 2004; Cho et al, 2006), protection from root pathogens (Graham, 2001), tolerance to toxic heavy metals and phytoremediation (Audet and Charest, 2006; Göhre and Paszkowski, 2006), tolerance to adverse conditions such as very high or low temperature, high salinity (Sannazzaro et al, 2006), high or low pH (Yano and Takaki, 2005) or better performance during transplantation shock (Subhan et al, 1998). The extraradical hyphae also stabilize soil aggregates by both enmeshing soil particles (Miller e Jastrow, 1992) and producing a glycoprotein, golmalin, which may act as a glue-like substance to adhere soil particles together (Wright and Upadhyaya, 1998).
Despite the ubiquous distribution of mycorrhizal fungi (Smith and Read, 2000) and only a relative specificity between host plants and fungal isolates (McGonigle and Fitter, 1990), the obligate nature of the symbiosis implies the establishment of a plant propagation system, either under greenhouse conditions or in vitro laboratory propagation. These techniques result in high inoculum production costs, which still remains a serious problem since they are not competitive with production costs of phosphorus fertilizer. Even if farmers understand the significance of sustainable agricultural systems, the reduction of phosphorus inputs by using AM fungal inocula alone cannot be justified except, perhaps, in the case of high value crops (Saioto and Marumoto, 2002). Nurseries, high income horticulture farmers and no-agricultural application such as rehabilitation of degraded or devegetated landscapes are examples of areas where the use of commercial inoculum is current. Another serious problem is quality of commercial available products concerning guarantee of phatogene free content, storage conditions, most effective application methods and what types to use. Besides the information provided by suppliers about its inoculum can be deceiving, as from the usually referred total counts, only a fraction may be effective for a particular plant or in specific soil conditions. Gianinazzi and Vosátka (2004) assume that progress should be made towards registration procedures that stimulate the development of the mycorrhizal industry.
Some on-farm inoculum production and application methods have been studied, allowing farmers to produce locally adapted isolates and generate a taxonomically diverse inoculum (Mohandas et al, 2004; Douds et al, 2005). However the inocula produced this way are not readily processed for mechanical application to the fields, being an obstacle to the utilization in large scale agriculture, especially row crops, moreover it would represent an additional mechanical operation with the corresponding economic and soil compaction costs.
It is well recognized that inoculation of AM fungi has a potential significance in not only sustainable crop production, but also environmental conservation. However, the status quo of inoculation is far from practical technology that can be widely used in the field. Together a further basic understanding of the biology and diversity of AM fungi is needed (Abbott at al, 1995; Saito and Marumoto, 2002).
Advances in ecology during the past decade have led to a much more detailed understanding of the potential negative consequences of species introductions and the potential for negative ecological consequences of invasions by mycorrhizal fungi is poorly understood. Schwartz et al, (2006) recommend that a careful assessment documenting the need for inoculation, and the likelihood of success, should be conducted prior to inoculation because inoculations are not universally beneficial.
Agricultural practices such as crop rotation, tillage, weed control and fertilizer apllication all produce changes in the chemical, physical and biological soil variables and affect the ecological niches available for occupancy by the soil biota, influencing in different ways the symbiosis performance and consequently the inoculum development, shaping changes and upset balance of native populations. The molecular biology tools developed in the latest years have been very important for our perception of these changes, ensuing awareness of management choice implications in AM development.
In this context, for extensive farming systems and regarding environmental and economic costs, the identification of agronomic management practices that allow controlled manipulation of the fungal community and capitalization of AM mutualistic effect making use of local inoculum, seem to be a wise option for mycorrhiza promotion and development of sustainable crop production
Photon and neutral pion production in Au+Au collisions at sqrt(s_{NN}) = 130 GeV
We report the first inclusive photon measurements about mid-rapidity
(|y|<0.5) from Au+Au collisions at sqrt(s_{NN}) = 130 GeV at RHIC. Photon pair
conversions were reconstructed from electron and positron tracks measured with
the Time Projection Chamber (TPC) of the STAR experiment. With this method, an
energy resolution of Delta(E)/E = 2% at 0.5 GeV has been achieved.
Reconstructed photons have also been used to measure the transverse momentum
(pt) spectra of pi0 mesons about mid-rapidity (|y| photon
photon decay channel. The fractional contribution of the pi0 -> photon photon
decay to the inclusive photon spectrum decreases by 20% +/- 5% between pt =
1.65 GeV/c and pt = 2.4 GeV/c in the most central events, indicating that
relative to pi0 -> photon photon decay the contribution of other photon sources
is substantially increasing.Comment: 13 pages, 14 figures, submitted to Phys. Rev.
Pion interferometry in Au+Au collisions at = 200 GeV
We present a systematic analysis of two-pion interferometry in Au+Au
collisions at = 200 GeV using the STAR detector at RHIC. We
extract the HBT radii and study their multiplicity, transverse momentum, and
azimuthal angle dependence. The Gaussianess of the correlation function is
studied. Estimates of the geometrical and dynamical structure of the freeze-out
source are extracted by fits with blast wave parameterizations. The expansion
of the source and its relation with the initial energy density distribution is
studied.Comment: 21 pages, 30 figures. As published in Physics Review
Transverse-momentum dependent modification of dynamic texture in central Au+Au collisions at sqrt(S_NN)=200 GeV
Correlations in the hadron distributions produced in relativistic Au+Au
collisions are studied in the discrete wavelet expansion method. The analysis
is performed in the space of pseudorapidity (|eta| < 1) and azimuth (full 2 pi)
in bins of transverse momentum (p_t) from 0.14 < p_t < 2.1 GeV/c. In peripheral
Au+Au collisions a correlation structure ascribed to mini-jet fragmentation is
observed. It evolves with collision centrality and p_t in a way not seen before
which suggests strong dissipation of minijet fragmentation in the
longitudinally-expanding medium.Comment: 6 pages, 3 figure, accepted as Phys.Rev.C Rapid Communication. This
version fixes journal style issue
Multiplicity and Pseudorapidity Distributions of Charged Particles and Photons at Forward Pseudorapidity in Au + Au Collisions at sqrt{s_NN} = 62.4 GeV
We present the centrality dependent measurement of multiplicity and
pseudorapidity distributions of charged particles and photons in Au + Au
collisions at sqrt{s_NN} = 62.4 GeV. The charged particles and photons are
measured in the pseudorapidity region 2.9 < eta < 3.9 and 2.3 < eta < 3.7,
respectively. We have studied the scaling of particle production with the
number of participating nucleons and the number of binary collisions. The
photon and charged particle production in the measured pseudorapidity range has
been shown to be consistent with energy independent limiting fragmentation
behavior. The photons are observed to follow a centrality independent limiting
fragmentation behavior while for the charged particles it is centrality
dependent. We have carried out a comparative study of the pseudorapidity
distributions of positively charged hadrons, negatively charged hadrons,
photons, pions, net protons in nucleus--nucleus collisions and pseudorapidity
distributions from p+p collisions. From these comparisons we conclude that
baryons in the inclusive charged particle distribution are responsible for the
observed centrality dependence of limiting fragmentation. The mesons are found
to follow an energy independent behavior of limiting fragmentation while the
behavior of baryons seems to be energy dependent.Comment: 17 pages and 20 figure
CMB Telescopes and Optical Systems
The cosmic microwave background radiation (CMB) is now firmly established as
a fundamental and essential probe of the geometry, constituents, and birth of
the Universe. The CMB is a potent observable because it can be measured with
precision and accuracy. Just as importantly, theoretical models of the Universe
can predict the characteristics of the CMB to high accuracy, and those
predictions can be directly compared to observations. There are multiple
aspects associated with making a precise measurement. In this review, we focus
on optical components for the instrumentation used to measure the CMB
polarization and temperature anisotropy. We begin with an overview of general
considerations for CMB observations and discuss common concepts used in the
community. We next consider a variety of alternatives available for a designer
of a CMB telescope. Our discussion is guided by the ground and balloon-based
instruments that have been implemented over the years. In the same vein, we
compare the arc-minute resolution Atacama Cosmology Telescope (ACT) and the
South Pole Telescope (SPT). CMB interferometers are presented briefly. We
conclude with a comparison of the four CMB satellites, Relikt, COBE, WMAP, and
Planck, to demonstrate a remarkable evolution in design, sensitivity,
resolution, and complexity over the past thirty years.Comment: To appear in: Planets, Stars and Stellar Systems (PSSS), Volume 1:
Telescopes and Instrumentatio
- …