Correlating Microstructural Lithium Metal Growth with Electrolyte Salt Depletion in Lithium Batteries Using ⁷Li MRI

Lithium dendrite growth in lithium ion and lithium rechargeable batteries is associated with severe safety concerns. To overcome these problems, a fundamental understanding of the growth mechanism of dendrites under working conditions is needed. In this work, in situ ⁷Li magnetic resonance (MRI) is performed on both the electrolyte and lithium metal electrodes in symmetric lithium cells, allowing the behavior of the electrolyte concentration gradient to be studied and correlated with the type and rate of microstructure growth on the Li metal electrode. For this purpose, chemical shift (CS) imaging of the metal electrodes is a particularly sensitive diagnostic method, enabling a clear distinction to be made between different types of microstructural growth occurring at the electrode surface and the eventual dendrite growth between the electrodes. The CS imaging shows that mossy types of microstructure grow close to the surface of the anode from the beginning of charge in every cell studied, while dendritic growth is triggered much later. Simple metrics have been developed to interpret the MRI data sets and to compare results from a series of cells charged at different current densities. The results show that at high charge rates, there is a strong correlation between the onset time of dendrite growth and the local depletion of the electrolyte at the surface of the electrode observed both experimentally and predicted theoretical (via the Sand’s time model). A separate mechanism of dendrite growth is observed at low currents, which is not governed by salt depletion in the bulk liquid electrolyte. The MRI approach presented here allows the rate and nature of a process that occurs in the solid electrode to be correlated with the concentrations of components in the electrolyte

Investigating Li Microstructure Formation on Li Anodes for Lithium Batteries by in Situ ⁶Li/⁷Li NMR and SEM

The growth of lithium microstructures during battery cycling has, to date, prohibited the use of Li metal anodes and raises serious safety concerns even in conventional lithium-ion rechargeable batteries, particularly if they are charged at high rates. The electrochemical conditions under which these Li microstructures grow have, therefore, been investigated by in situ nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), and susceptibility calculations. Lithium metal symmetric bag cells containing LiPF₆ in EC/DMC electrolytes were used. Distinct ⁷Li NMR resonances were observed due to the Li metal bulk electrodes and microstructures, the changes in peak positions and intensities being monitored in situ during Li deposition. The changes in the NMR spectra, observed as a function of separator thickness and porosity (using Celgard and Whatmann glass microfiber membranes) and different applied pressures, were correlated with changes in the type of microstructure, by using SEM. Isotopically enriched ⁶Li metal electrodes were used against natural abundance predominantly ⁷Li metal counter electrodes to investigate radiofrequency (rf) field penetration into the Li anode and to confirm the assignment of the higher frequency peak to Li dendrites. The conclusions were supported by calculations performed to explore the effect of the different microstructures on peak position/broadening, the study showing that Li NMR spectroscopy can be used as a sensitive probe of both the amount and type of microstructure formation