Calibration of a Passive Sampler for Both Gaseous and Particulate Phase Polycyclic Aromatic Hydrocarbons

A novel passive air sampler was designed and tested that individually collects the gaseous and particulate phase polycyclic aromatic hydrocarbons (PAHs) in air. The sampler was calibrated against a conventional active sampler in an indoor environment. A PUF (polyurethane foam) disk and a piece of GFF (glass fiber filter) were installed in a sampling shelter for collecting gaseous and particulate phase PAHs, respectively. The passive samplers were deployed in seven indoor locations for 86 days. Six times during this period, 24-h conventional active sampling was conducted for calibration at an average interval of 17-days. Principle component analysis showed that the measured congener profile compositions were totally different between the gaseous and particulate phase PAHs, but similar between the passive and the active samples. This suggested that gaseous and particulate phase PAHs were primarily trapped by the PUF disk and GFF, respectively. Linear relationships between the passively and the actively measured and log-transformed concentrations were derived for calibration of both gaseous and particulate phase PAHs. The uptake rates of the sampler were 0.10 ± 0.014 m3/d and 0.007 ± 0.001 m3/d for gaseous and particulate phase PAHs, respectively. The rates were significantly lower than those reported in the literature using similar PUF samplers, mainly because of the special design with limited air circulation

Atmospheric Polycyclic Aromatic Hydrocarbons in North China: A Winter-Time Study

The contamination and outflow of atmospheric polycyclic aromatic hydrocarbons (PAHs) in the Chinese Northern Plain, a region with a total area of 300 000 km2 and a high PAH emission density, were investigated. Polyurethane foam (PUF) and PM10 samples were collected at 46 sites located in urban, rural (towns or villages), and control (remote mountain) areas in the winter from November 2005 to February 2006. The observed concentrations of atmospheric PAHs were generally higher than those reported for developed countries and southern Chinese cities. It was found that there was no significant difference in air PAH concentrations between the urban and the rural areas (514 ± 563 ng/m3 and 610 ± 645 ng/m3, respectively), while the PAH concentrations at the control sites (57.1 ± 12.6 ng/m3) were 1 order of magnitude lower than those at the other sites. The primary reason for the similarity in PAH concentrations between urban and rural areas was the fact that the predominant sources of biomass and domestic coal combustion were widely spread over the study area. The partition constants (KPM10) of PAHs were significantly correlated to the corresponding values of subcooled liquid–vapor pressure (pL0). However, the regression slopes of log KPM10 versus log pL0 were much steeper than −1, indicating adsorption dominated over absorption. Three distinct patterns of outflow from the study area were identified by forward trajectory and cluster analysis