657 research outputs found

    Flat-plate heat pipe

    Get PDF
    Flat plate (vapor chamber) heat pipes were made by enclosing metal wicking between two capillary grooved flat panels. These heat pipes provide a unique configuration and have good capacity and conductance capabilities in zero gravity. When these flat plate vapor chamber heat pipes are heated or cooled, the surfaces are essentially isothermal, varying only 3 to 5 C over the panel surface

    Steady state and transient performance of hot reservoir gas controlled heat pipes

    Get PDF
    Inert gases for passive control of heat pipes in hot reservoir system

    User's manual for the TRW gaspipe program. A vapor-gas front analysis program for heat pipes containing noncondensible gas

    Get PDF
    Digital computer program manual for design, analysis, and performance prediction of heat pipes with noncondensible gases including input/output routines and Runge-Kutta model

    User's manual for the TRW gaspipe 2 program: A vapor-gas front analysis program for heat pipes containing non-condensible gas

    Get PDF
    A digital computer program for design and analysis of heat pipes which contain non-condensible gases, either for temperature control or to aid in start-up from the frozen state, is presented. Some of the calculations which are possible with the program are: (1) wall temperature profile along a gas-loaded heat pipe, (2) amount of gas loading necessary to obtain desired evaporator temperature at a desired heat load, (3) heat load versus evaporator temperature for a fixed amount of gas in the pipe, and (4) heat and mass transfer along the pipe, including the vapor-gas front region

    Advanced radiator concepts utilizing honeycomb panel heat pipes (stainless steel)

    Get PDF
    The feasibility of fabricating and processing moderate temperature range heat pipes in a low mass honeycomb sandwich panel configuration for highly efficient radiator fins for the NASA space station was investigated. A variety of honeycomb panel facesheet and core-ribbon wick concepts were evaluated within constraints dictated by existing manufacturing technology and equipment. Concepts evaluated include: type of material, material and panel thicknesses, wick type and manufacturability, liquid and vapor communication among honeycomb cells, and liquid flow return from condenser to evaporator facesheet areas. In addition, the overall performance of the honeycomb panel heat pipe was evaluated analytically

    Heat Pipe Materials Compatibility

    Get PDF
    An experimental program to evaluate noncondensable gas generation in ammonia heat pipes was completed. A total of 37 heat pipes made of aluminum, stainless steel and combinations of these materials were processed by various techniques, operated at different temperatures and tested at low temperature to quantitatively determine gas generation rates. In order of increasing stability are aluminum/stainless combination, all aluminum and all stainless heat pipes. One interesting result is the identification of intentionally introduced water in the ammonia during a reflux step as a means of surface passivation to reduce gas generation in stainless-steel/aluminum heat pipes

    Vapor-modulated heat pipe report. Flight data analysis and further development of variable-conductance heat pipes

    Get PDF
    The design and testing of a heat pipe for spacecraft application is presented. The application in mind calls for heat loads up to 20 watts, a set-point temperature of 294K, and a sink that varies from -220K to nearly as high as the set-point. The overall heat pipe length is 137 cm. Two basically different mechanisms of achieving variable conductance in the pipe by vapor-flow throttling were studied. In one, the thermal resistance between the heat source and sink is due to a saturation-temperature drop corresponding to the vapor-pressure drop developed across the valve. In the other, the pressure difference across the valve induces capillary groove and wick dry out in an evaporation region, and thus results in an increased thermal resistance. This mechanism was selected for fabrication and testing. The pipe is a stainless-steel/methanol two-heat-pipe system. Results are presented and discussed. Engineering drawings and specifications of the pipe are shown

    Advanced radiator concepts utilizing honeycomb panel heat pipes

    Get PDF
    The feasibility of fabricating and processing moderate temperature range vapor chamber type heat pipes in a low mass honeycomb panel configuration for highly efficient radiator fins for potential use on the space station was investigated. A variety of honeycomb panel facesheet and core-ribbon wick concepts were evaluated within constraints dictated by existing manufacturing technology and equipment. Concepts evaluated include type of material, material and panel thickness, wick type and manufacturability, liquid and vapor communication among honeycomb cells, and liquid flow return from condenser to evaporator facesheet areas. A thin-wall all-welded stainless steel design with methanol as the working fluid was the initial prototype unit. It was found that an aluminum panel could not be fabricated in the same manner as a stainless steel panel due to diffusion bonding and resistance welding considerations. Therefore, a formed and welded design was developed. The prototype consists of ten panels welded together into a large panel 122 by 24 by 0.15 in., with a heat rejection capability of 1000 watts and a fin efficiency of essentially 1.0

    Menstrual cycle phase does not predict political conservatism

    Get PDF
    Recent authors have reported a relationship between women's fertility status, as indexed by menstrual cycle phase, and conservatism in moral, social and political values. We conducted a survey to test for the existence of a relationship between menstrual cycle day and conservatism. 2213 women reporting regular menstrual cycles provided data about their political views. Of these women, 2208 provided information about their cycle date, 1260 provided additional evidence of reliability in self-reported cycle date, and of these, 750 also indicated an absence of hormonal disruptors such as recent hormonal contraception use, breastfeeding or pregnancy. Cycle day was used to estimate day-specific fertility rate (probability of conception); political conservatism was measured via direct self-report and via responses to the "Moral Foundations” questionnaire. We also recorded relationship status, which has been reported to interact with menstrual cycle phase in determining political preferences. We found no evidence of a relationship between estimated cyclical fertility changes and conservatism, and no evidence of an interaction between relationship status and cyclical fertility in determining political attitudes. Our findings were robust to multiple inclusion/exclusion criteria and to different methods of estimating fertility and measuring conservatism. In summary, the relationship between cycle-linked reproductive parameters and conservatism may be weaker or less reliable than previously thought
    corecore