128 research outputs found

    Development of biosensor and electrochemical studies of carbon-based materials

    Get PDF
    Ph.DDOCTOR OF PHILOSOPH

    Aminopyrene functionalized reduced graphene oxide as a supercapacitor electrode

    Get PDF
    In this work, we report on the structural and electrochemical properties of aminopyrene functionalized reduced graphene oxide (Ap-rGO) for its suitability as a supercapacitor electrode. The Ap-rGO is prepared by sonicating a suspension of rGO with aminopyrene and the filtered sediment is subjected to spectroscopy studies and electrochemical studies. Spectroscopy studies reveal the successful functionalization of aminopyrene onto Ap-rGO through π–π interactions. Electrochemical analyses of Ap-rGO show a substantial increase in the specific capacitance for Ap-rGO (160 F g−1 at 5 mV s−1) compared to the non-functionalized rGO (118 F g−1 at 5 mV s−1). The enhancement is shown to be the pseudocapacitance arising from the electron donating effect of the amine group and the electron accepting effect of rGO, which enable facile electron transfer between the surface-bound amine group and rGO. The Ap-rGO has desirable charge storage properties such as low series resistance (0.4 Ω) and superior cycling stability (85% after 5000 cycles). Furthermore, the Ap-rGO has 1.5 fold higher energy density than the non-functionalized rGO electrode, thereby making it suitable as a deployable supercapacitor electrode

    Graphene functionalized carbon felt/graphite felt fabrication as electrodes for vanadium redox flow batteries (VRBs): A review

    Get PDF
    The growth in the development of renewable energy sources has led to tremendous attention to the research in energy storage systems. One of the electrochemical energy storage systems that have shown great potential to be used on a large scale is vanadium redox flow batteries (VRBs), as they possess flexible designs, long life cycles, and high energy density. Carbon felts (CF), and graphite felts (GF) have commonly been used as electrodes in VRBs. To improve market penetration using VRB technology, researchers have focused on electrode modifications to increase the power density and rate capabilities of VRBs. One of the carbon-based modifications which have shown significant improvements in the performance of VRBs is the use of graphene, which has outstanding electrochemical and physical characteristics as an electrocatalyst. In this review, electrochemical, physical, and other methods which have been reported in the graphene functionalization of graphite felt/carbon felt are discussed. The working principle and limiting methods were elaborated on and discussed for each method. Finally, recommendations for future developments are also highlighted

    History and Progress of Polymers for Energy Applications

    Get PDF
    Polymer materials have attracted the interest of researchers in recent years as electrode materials and electrolytes for a variety of energy applications such as supercapacitors, batteries, fuel cells, solar cells, and electrochromic devices. Over the last few decades, there has been a great deal of research into the potential applications of these materials. Conducting polymers, in particular, exhibit semiconductor-like properties, and they have emerged as fascinating materials for the fabrication of electronic devices. This chapter covers the history and progress of polymer materials in several energy applications divided into energy storage and energy conversion applications

    One-step production of pyrene-1-boronic acid functionalized graphene for dopamine detection

    Get PDF
    A facile molecular wedging method is used to exfoliate graphite flakes into graphene sheets, with concurrent functionalization to form pyrene-1-boronic acid functionalized graphene (PBA/G). Different techniques are used to characterize the prepared materials such as field emission scanning electron microscope, energy dispersive X-ray analyzer, Raman, Fourier transformed infrared spectroscopy and fluorescence spectroscopy to evaluate their structural and morphological characteristics. The intercalation of PBA into graphite sheets, followed by exfoliation can be observed under the electron microscope. Elemental analyses show that the PBA acts more than intercalant, it is functionalized onto the graphene sheets upon exfoliation to form PBA/G. Raman analysis indicates PBA/G has a lower number of graphene layers as a result of successful exfoliation by PBA. Electrochemical impedance studies show that the PBA/G possesses high affinity for dopamine through the diol groups interaction, which renders it to have enhanced detection for dopamine

    In situ growth of redox-active iron-centered nanoparticles on graphene sheets for specific capacitance enhancement

    Get PDF
    AbstractA fast and facile approach is proposed to enhance the specific capacitance of N-Methyl-2-pyrrolidone (NMP)-exfoliated graphene. Redox-active nickel ferricyanide (NiFeCN) nanoparticles were grown on the surface of graphene sheets using a simple co-precipitation method. Apart from the synergetic effect of graphene as double layer capacitance and NiFeCN as pseudocapacitance in specific capacitance enhancement, the NiFeCN nanoparticles served as the spacer to prevent the graphene sheets agglomeration. The NiFeCN/graphene exhibited specific capacitance of 113.5Fg−1, which was 2 times higher than the NMP-exfoliated graphene (52Fg−1) and 6times higher than the pure NiFeCN (18Fg−1). The findings suggested the NiFeCN/graphene could be the potential candidate for supercapacitor electrode

    Structural evaluation of graphene oxide/Zinc oxide nanocomposite for corrosion mitigation

    Get PDF
    Owing to the impermeability, high hardness, and hydrophobicity of graphene oxide, there is a growing demand for the development of graphene oxide-based nanocomposite. In this research, GO/ZnO nanocomposite is prepared through a sol–gel route and further spin-coated onto copper to study its potential in corrosion mitigation. This research aims to investigate the structural properties of the nanocomposite formed by various GO sheet sizes and correlate them to the corrosion mitigation mechanism. The different GO sheet sizes were obtained by ultrasonication at 1 h, 3 h and 5 h and the samples were termed as 1 h-GO/ZnO, 3 h-GO/ZnO and 5 h-GO/ZnO, respectively. The X-ray diffraction (XRD) analysis of all samples showed the diffraction peaks at 31.8°, 34.5°, and 36.3° due to the nucleation of ZnO into the graphene structure. The crystallite size of the nanocomposite has decreased with decreasing GO sheet sizes. The Fourier transform infrared (FTIR) spectrometer revealed a strong new peak at 443 cm−1 due to Zn-O characteristic vibrations as compared to as-synthesized GO. The Brunauer-Emmett-Teller (BET) analysis showed that the GO/ZnO nanocomposites exhibited a larger surface area when the GO sheet sizes decreased. The spin-coated sample of 5 h-GO/ZnO showed a higher potential for corrosion protection at 0.017 mm/yr corrosion rate

    Carbon Nanotube-Modified MnO2: An Efficient Electrocatalyst for Oxygen Reduction Reaction

    Get PDF
    In this work, manganese dioxide/carbon nanotube (MnO2/CNT) have been synthesized by sonochemical-coprecipitation method and demonstrated that it could be an effective electrocatalyst for oxygen reduction reaction (ORR). Moreover, the effect of CNT inclusion with MnO2 was also investigated for ORR. The physical and electrochemical properties of the MnO2/CNT were examined by powder X-ray diffraction (XRD), Fourier Transform Infrared (FT-IR) spectroscopy, Brunauer-Emmett-Teller (BET), Transmission Electron Microscopy (TEM), Field Emission Scanning Electron Microscopy/Energy Dispersive X-ray (FESEM/EDX), Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS), Mott-Schottky and Rotating Disk Electrode (RDE) analysis. CV showed higher currents for the ORR in MnO2/CNT than CNT; however, ORR current dropped when the MnO2 loading was increased from 20–40 %. The EIS analysis showed that charge-transfer resistance for MnO2/CNT was significantly lower compared to the MnO2 indicating that MnO2 has good contact with CNT and the composite possess high electrical conductivity. Mott-Schottky results demonstrated that incorporation of CNT into MnO2 resulted in producing larger electron density in n-type MnO2/CNT compared to MnO2 which is liable for efficient electron donation from the Mn3+ to adsorbed oxygen in the rate determining step. RDE results showed that MnO2/CNT follows 4e− transfer pathway, indicating its ability to act as an effective ORR electrocatalyst

    An electrochemical DNA biosensor fabricated from graphene decorated with graphitic nanospheres

    Get PDF
    Graphene decorated with graphitic nanospheres functionalized with pyrene butyric acid (PBA) is used for the first time to fabricate a DNA biosensor. The electrode was formed by attaching a DNA probe onto PBA, which had been stacked onto a graphene material decorated with graphene nanospheres (GNSs). The nanomaterial was drop-coated onto a carbon screen-printed electrode (SPE) to create the GNS-PBA modified electrode (GNS-PBA/SPE). A simple method was used to produce GNS by annealing graphene oxide (GO) solution at high temperature. Field emission scanning electron micrographs confirmed the presence of a spherical shape of GNS with a diameter range of 40–80 nm. A stable and uniform PBA-modified GNS (GNS-PBA) was obtained with a facile ultrasonication step. Thus allowing aminated DNA probes of genetically modified (GM) soybean to be attached to the nanomaterials to form the DNA biosensor. The GNS-PBA/SPE exhibited excellent electrical conductivity via cyclic voltammetry (CV) and differential pulse voltammetry (DPV) tests using potassium ferricyanide (K3[Fe(CN)6]) as the electroactive probe. By employing an anthraquinone monosulfonic acid (AQMS) redox intercalator as the DNA hybridization indicator, the biosensor response was evaluated using the DPV electrochemical method. A good linear relationship between AQMS oxidation peak current and target DNA concentrations from 1.0 × 10−16 to 1.0 × 10−8 M with a limit of detection (LOD) of less than 1.0 × 10−16 M was obtained. Selectivity experiments revealed that the voltammetric GM DNA biosensor could discriminate complementary sequences of GM soybean from non-complementary sequences and hence good recoveries were obtained for real GM soybean sample analysis. The main advantage of using GNS is an improvement of the DNA biosensor analytical performance
    corecore