Geometry Effect Investigation on a Conical Chamber with Porous Media Boundary Condition Using Computational Fluid Dynamic (CFD) Technique

The present study is an attempt to introduce a method for optimizing the geometry of a unit process. The comprehensive unit process performances are generated by a CFD engine. The CFD engine can simulate the unit process performances at whatever conditions. Both design geometry and operating variables were used on the CFD simulation. The burden on a simplified process was taken out from CFD simulation. A complex geometry of a unit process is represented by a secondary reformer. A secondary reformer has a conical chamber as a space to undergo a combustion reaction before entering a catalyst bed. This complexity is added by the boundary on a porous solid surface as the top surface of the catalyst bed. The conical angle affects the flow pattern inside the conical chamber having a porous solid surface as its base. The conical angle above 65° results the disappearing of the recirculation flow. The inlet distance from the porous solid surface also can exhibit different characteristics of recirculation flow. The closer the distance to the porous solid surface, the stronger the recirculation is. The inlet velocity values have no significant effect on the flow pattern. The introduction of a solid volume inside the geometry creates distortion in the flow pattern. In the application, the inserted solid volume is equivalent to a burner. It means that the use of the burner inherently produces some problems of the flow distribution

New Correlations for Coal and Biomass Pyrolysis Performances with Coal-Biomass Type Number and Temperature

The pyrolysis of coal and biomass is generally reported as the mass yield of released chemicals at various temperatures, pressures, heating rates and coal or biomass type. In this work, a new coal-biomass type number, NCT, is introduced. This number is constructed from the mass fractions of carbon, hydrogen, and oxygen in the ultimate analysis. This number is unique for each coal or biomass type. For 179 different species of coal and biomass from the literature, the volatile matter mass yield can be expressed by the second order polynomial function ln(NCT). This unique correlation allows the effects of the temperature and heating rate on the volatile yield YVY for coal and biomass to be empirically correlated as well. The correlation for the mass fraction of each chemical component in the released volatile matter correlation is obtained from the YVY correlation. The weight factor for some of the components is constant for the variation of NCT, but not for others. The resulted volatile matter and yield correlations are limited to atmospheric pressure, very small particles (less than 0.212 mm) and interpreted for wire-mesh pyrolysis reactor conditions and a nitrogen gas environment

Dynamic Behavior of Reverse Flow Reactor for Lean Methane Combustion

The stability of reactor operation for catalytic oxidation of lean CH4 has been investigated through modeling and simulation, particularly the influence of switching time and heat extraction on reverse flow reactor (RFR) performance. A mathematical model of the RFR was developed, based on one-dimensional pseudo-homogeneous model for mass and heat balances, incorporating heat loss through the reactor wall. The configuration of the RFR consisted of inert-catalyst-inert, with or without heat extraction that makes it possible to store the energy released by the exothermic reaction of CH4 oxidation. The objective of this study was to investigate the dynamic behavior of the RFR for lean methane oxidation and to find the optimum condition by exploring a stability analysis of the simple reactor. The optimum criteria were defined in terms of CH4 conversion, CH4 slip, and heat accumulation in the RFR. At a switching time of 100 s, the CH4 conversion reached the maximum value, while the CH4 slip attained its minimum value. The RFR could operate autothermally with positive heat accumulation, i.e. 0.02 J/s. The stability of the RFR in terms of heat accumulation was achieved at a switching time of 100 s

Development of Instant Microbial Starter for Production of Fermented Cassava Flour: Effect of Vacuum Drying Temperature, Carrier Media, and Storage Temperature

Cassava is an important crop for tropical countries such as Nigeria, Brazil, Thailand, and Indonesia. The potential utilization of cassava in the food industry can be enhanced by processing cassava into fermented cassava flour (fercaf), which has been shown to have a neutral color and aroma as well as low cyanogenic content. The use of specific microbial starter in the cassava chip fermentation for fercaf production will direct the fermentation process, maintaining a high quality of the produced flour. Thereby, the availability of an easy-to-use microbial starter is important for the production of fermented cassava flour. The aim of this study was to evaluate vacuum drying methods in the preparation of microbial starter for fermented cassava flour production. In particular, the effects of carrier media, drying and storage temperature on cell viability in dry starter were tested. The results showed that different methods should be applied to different microbial species. Bacillus subtilis and Aspergillus Oryza should be prepared using fercaf as the carrier media at a drying temperature of 55 °C, whereas Lactobacillus plantarum starter should be prepared using skim milk as the carrier media at a drying temperatur of 40°C. Apart from B. subtilis, the starters should be stored in a refrigerator

Pengaruh Kadar Karbon pada Proses Gasifikasi

Investigasi proses gasifikasi dilakukan dengan pemodelan termodinamik. Kuantifikasi unjuk kerja proses gasifikasi dinyatakan dengan kadar H2 dan kadar CO dalam gas produser, temperatur dan efisiensi termal. Investigasi pengaruh kadar karbon terhadap unjuk kerja proses gasifikasi dilakukan dengan simulasi menggunakan batubara: lignit, bituminus dan antrasit. Ketiga jenis batubara diharapkan mewakili tingkatan kadar karbon. Kajian termodinamika digunakan sebagai piranti prediksi kinerja gasifikasi dan dapat melihat efek berbagai faktor secara cepat. Penyimpangan kinerja gasifier aktual terhadap hasil prediksi termodinamika sering ditemui dan biasanya dianggap sebagai akibat faktor-faktor teknis yang berhubungan dengan laju proses, misalnya pengontakan partikel dengan medium gasifikasi. Pada makalah ini, kajian termodinamika disempurnakan dengan melibatkan pemodelan dekomposisi batubara yang sangat tergantung pada jenis batubara dalam hal ini mewakili kadar karbon. Harapannya, pengabungan model dekomposisi batubara yang diusulkan dalam penelitian ini dan model kesetimbangan reaksi konvensional menghasilkan kajian termodinamika yang lebih rasional. Hasil dari kajian termodinamika digunakan sebagai piranti prediksi kinerja gasifikasi dengan mempertimbangkan kadar karbon batubara. Fraksi mol gas hidrogen maksimum yang dihasilkan lignit lebih tinggi daripada antrasit dan bituminus, berturut-turut 0,43 dan 0,25. Fraksi mol maksimum gas hidrogen dari lignit berada pada laju udara/batubara sekitar 1,2 kg/kg sedangkan antrasit dan bituminus berada pada sekitar 3 kg/kg. Temperatur proses gasifikasi, seperti diduga sangat dipengaruhi oleh jenis batubara. Sesuai dengan kadar H2, temperatur gasifikasi sebaiknya dijaga sekitar 1000 oC (Ru = 2,4 dan 4 berturut-turut untuk batubara lignit, antrasit dan bituminus). Keuntungan pada temperatur sekitar 1000 oC, tar secara praktis sudah terdekomposisi lebih lanjut, sehingga gas produser hanya sedikit mengandung tar

Utilizing Shear Factor Model and Adding Viscosity Term in Improving a Two-Dimensional Model of Fluid Flow in Non Uniform Porous Media

In a packed bed catalytic reactor, the fluid flow phenomena are very complicated because the fluid and solid particle interactions dissipate the energy. The governing equations were developed in the forms of specific models. The shear factor model was introduced in the momentum equation for covering the effect of flow and solid interactions in porous media. A two dimensional numerical solution for this kind of flow has been constructed using the finite volume method. The porous media porosity was treated as non-uniform distribution in the radial direction. Experimentally, the axial velocity profiles produce the trend of having global maximum and minimum peaks at distance very close to the wall. This trend is also accurately picked up by the numerical result. A more comprehensive shear factor formulation results a better velocity prediction than other correlations do. Our derivation on the presence of porous media leads to an additional viscosity term. The effect of this additional viscosity term was investigated numerically. It is found that the additional viscosity term improves the velocity prediction for the case of higher ratio between tube and particle diameter

Homogeneity of Continuum Model of an Unsteady State Fixed Bed Reactor for Lean CH4 Oxidation

In this study, the homogeneity of the continuum model of a fixed bed reactor operated in steady state and unsteady state systems for lean CH4 oxidation is investigated. The steady-state fixed bed reactor system was operated under once-through direction, while the unsteady-state fixed bed reactor system was operated under flow reversal. The governing equations consisting of mass and energy balances were solved using the FlexPDE software package, version 6. The model selection is indispensable for an effective calculation since the simulation of a reverse flow reactor is time-consuming. The homogeneous and heterogeneous models for steady state operation gave similar conversions and temperature profiles, with a deviation of 0.12 to 0.14%. For reverse flow operation, the deviations of the continuum models of thepseudo-homogeneous and heterogeneous models were in the range of 25-65%. It is suggested that pseudo-homogeneous models can be applied to steady state systems, whereas heterogeneous models have to be applied to unsteady state systems

CFD Analysis of Efficiency and Pressure Drop in a Gas-solid Square Cyclones Separator

In this paper, two small cyclones with the same hydraulic diameter and volume, which one is square and the other one is round (Lapple cyclone), are numerically compared. A pre-processor software GAMBIT was employed to set up the configuration, discretisation, and boundary conditions of the cyclone. The characteristics of the cyclone being studied was 0.2 m in diameter, receiving a gas flow rate of 0.1 m3/s with a particle mass loading of 0.01 kg/s. A commercial CFD code FLUENT 6.2.16 was employed to simulate the flow field and particle dynamics in the cyclone. The Reynolds averaged Navier–Stokes equations with Reynolds Stress Turbulence Model (RSTM) are solved by use of the finite volume method based on the SIMPLE pressure correction algorithm in the computational domain. The Eulerian–Lagrangian computational procedure is used to predict particles tracking in the cyclones. The velocity fluctuations are simulated using the Discrete Random Walk (DRW).The results show that collection efficiency of square cyclone is the better with increasing flow rate than round cyclone. The pressure drop in square cyclone is higher than the pressure drop in small round one

Simulation of the Crosswind and the Steam Addition Effect on the Flare Flame

This paper presents the results obtained from the application of computational fluid dynamics (CFD) to modelling the crosswind and steam addition effect on a turbulent non-premixed flame. A pre-processor software GAMBIT was employed to set up the configuration, discretisation, and boundary conditions of the flame being investigated. The commercial software Fluent 6.3 was used to perform the calculations of flow and mixing fields as well as combustion. Standard k-ε and eddy dissipation models were selected as solvers for the representation of the turbulence and combustion, respectively. The results of all calculations are presented in the forms of contour profiles. During the investigation, the treatment was performed by setting a velocity of fuel at 20 m/s with varied cross-wind velocity at 3.77 m/s, 7.5 m/s and 10 m/s, and steam/fuel ratio at 0.14, 0.25 and 2.35. The results of the investigation showed that the standard k-ε turbulence model in conjunction with Eddy Dissipation Model representing the combustion was capable of producing reliable phenomena of the flow field and reactive scalars field in the turbulent non-premixed flame being investigated. Other results of the investigation showed that increasing the velocity of the crosswind, when the fuel velocity was kept constant, significantly affected the flow field, temperature and species concentrations in the flare flame. On the other hand, when the velocity of the fuel was varied at the constant crosswind velocity, the increasing velocity of the fuel gave positive impact as it enabled to counteract the effect of crosswind on the flare flame. The velocity of the crosswind very influence of combustion efficiency, from result of the investigation showed that increasing the velocity of the crosswind significantly affected the combustion efficiency, other result of the inverstigation showed that steam addition will very influencing combustion, excelsior the steam/fuel ratio results the combustion efficiency decreas