Efficient Removal of Methyl Orange and Alizarin Red S from pH-Unregulated Aqueous Solution by the Catechol–Amine Resin Composite Using Hydrocellulose as Precursor

We report a novel composite absorbent prepared by the simple method that catechol-amine resin coats the hydrocellulose based on the adhesion property like polydopamine. The composite which contains many chelating groups on its surface was characterized by scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), etc. The obtained adsorbents were investigated to remove Methyl Orange (MO) and Alizarin Red S (AR) from pH-unregulated aqueous system by batch experiments, including the affected factors of adsorbent dosage, contact time, initial concentration, and temperature. Results showed the adsorption processes belonged to the chemisorption and exhibited a spontaneous and endothermic nature. Besides, the removal performances fitted with the Langmuir isotherm model and pseudo-second order kinetic model very well. The maximum adsorption amounts of MO and AR were 189.39 and 284.09 mg/g at 303 K, respectively. The difference about adsorption amounts may be caused by the strong effect of π–π conjugation and hydrogen bonding between adsorbent and AR. Furthermore, the adsorption processes exhibited a spontaneous and endothermic nature. The recycling test indicated that the adsorbent stayed stable for the removal of both dyes by desorbed three times. Accordingly, the adsorbent with high adsorption capacity and rapid removal rate should be a promising material for the removal of anionic dyes from sewage

Advanced Bacterial Cellulose Ionic Conductors with Gigantic Thermopower for Low-Grade Heat Harvesting

Ionic conductors such as polymer electrolytes and ionic liquids have high thermoelectric voltages several orders of magnitude higher than electronic thermoelectric materials, while their conductivity is much lower than the latter. This work reports a novel approach to achieve high-performance ionic conductors using calcium ion (Ca2+) coordinated bacterial cellulose (CaBC) through molecular channel engineering. Through the coordination of Ca2+ with cellulose molecular chain, the distance between the cellulose molecular chains is widened, so that ions can transport along the cellulose molecular chain. Therefore, we reported ionic thermoelectric (i-TE) material based on CaBC/NaCl with a relatively high ionic Seebeck coefficient of −27.2 mV K–1 and high ionic conductivity of 204.2 mS cm–1. This ionic hydrogel is promising in the design of high-thermopower i-TE materials for low-grade heat energy harvesting

Stretchable and Durable Bacterial Cellulose-Based Thermocell with Improved Thermopower Density for Low-Grade Heat Harvesting

Low-grade heat exists ubiquitously in the environment, and gel-state thermogalvanic cells (GTCs) can directly convert thermal energy into electricity by a redox reaction. However, their low ionic conductivity and poor mechanical properties are still insufficient for their potential applications. Here, we designed a bacterial cellulose (BC) nanofiber-macromolecular entanglement network to balance the GTC’s thermopower and mechanical properties. Therefore, the BC-GTC shows a Seebeck coefficient of 3.84 mV K–1, an ionic conductivity of 108.5 mS cm–1, and a high specific output power density of 1760 μW m–2 K–2, which are much higher than most current literature. Further connecting 15 units of BC-GTCs, the output voltage of 3.35 V can be obtained at a temperature gradient of 65 K, which can directly power electronic devices such as electronic calculators, thermohydrometers, fans, and light-emitting diodes (LEDs). This work offers a promising method for developing high-performance and durable GTC in sustainable green energy

Stretchable and Durable Bacterial Cellulose-Based Thermocell with Improved Thermopower Density for Low-Grade Heat Harvesting

Low-grade heat exists ubiquitously in the environment, and gel-state thermogalvanic cells (GTCs) can directly convert thermal energy into electricity by a redox reaction. However, their low ionic conductivity and poor mechanical properties are still insufficient for their potential applications. Here, we designed a bacterial cellulose (BC) nanofiber-macromolecular entanglement network to balance the GTC’s thermopower and mechanical properties. Therefore, the BC-GTC shows a Seebeck coefficient of 3.84 mV K–1, an ionic conductivity of 108.5 mS cm–1, and a high specific output power density of 1760 μW m–2 K–2, which are much higher than most current literature. Further connecting 15 units of BC-GTCs, the output voltage of 3.35 V can be obtained at a temperature gradient of 65 K, which can directly power electronic devices such as electronic calculators, thermohydrometers, fans, and light-emitting diodes (LEDs). This work offers a promising method for developing high-performance and durable GTC in sustainable green energy

Crack-Based Core-Sheath Fiber Strain Sensors with an Ultralow Detection Limit and an Ultrawide Working Range

With the booming development of flexible wearable sensing devices, flexible stretchable strain sensors with crack structure and high sensitivity have been widely concerned. However, the narrow sensing range has been hindering the development of crack-based strain sensors. In addition, the existence of the crack structure may reduce the interface compatibility between the elastic matrix and the sensing material. Herein, to overcome these problems, integrated core-sheath fibers were prepared by coaxial wet spinning with partially added carbon nanotube sensing materials in thermoplastic polyurethane elastic materials. Due to the superior interface compatibility and the change in the conductive path during stretching, the fiber strain sensor exhibits excellent durability (5000 tensile cycles), high sensitivity (>104), large stretchability (500%), a low detection limit (0.01%), and a fast response time of ∼60 ms. Based on these outstanding strain sensing performances, the fiber sensor is demonstrated to detect subtle strain changes (e.g., pulse wave and swallowing) and large strain changes (e.g., finger joint and wrist movement) in real time. Moreover, the fabric sensor woven with the core-sheath fibers has an excellent performance in wrist bending angle detection, and the smart gloves based on the fabric sensors also show exceptional recognition ability as a wireless sign language translation device. This integrated strategy may provide prospective opportunities to develop highly sensitive strain sensors with durable deformation and a wide detection range

Crack-Based Core-Sheath Fiber Strain Sensors with an Ultralow Detection Limit and an Ultrawide Working Range

With the booming development of flexible wearable sensing devices, flexible stretchable strain sensors with crack structure and high sensitivity have been widely concerned. However, the narrow sensing range has been hindering the development of crack-based strain sensors. In addition, the existence of the crack structure may reduce the interface compatibility between the elastic matrix and the sensing material. Herein, to overcome these problems, integrated core-sheath fibers were prepared by coaxial wet spinning with partially added carbon nanotube sensing materials in thermoplastic polyurethane elastic materials. Due to the superior interface compatibility and the change in the conductive path during stretching, the fiber strain sensor exhibits excellent durability (5000 tensile cycles), high sensitivity (>104), large stretchability (500%), a low detection limit (0.01%), and a fast response time of ∼60 ms. Based on these outstanding strain sensing performances, the fiber sensor is demonstrated to detect subtle strain changes (e.g., pulse wave and swallowing) and large strain changes (e.g., finger joint and wrist movement) in real time. Moreover, the fabric sensor woven with the core-sheath fibers has an excellent performance in wrist bending angle detection, and the smart gloves based on the fabric sensors also show exceptional recognition ability as a wireless sign language translation device. This integrated strategy may provide prospective opportunities to develop highly sensitive strain sensors with durable deformation and a wide detection range

Crack-Based Core-Sheath Fiber Strain Sensors with an Ultralow Detection Limit and an Ultrawide Working Range

With the booming development of flexible wearable sensing devices, flexible stretchable strain sensors with crack structure and high sensitivity have been widely concerned. However, the narrow sensing range has been hindering the development of crack-based strain sensors. In addition, the existence of the crack structure may reduce the interface compatibility between the elastic matrix and the sensing material. Herein, to overcome these problems, integrated core-sheath fibers were prepared by coaxial wet spinning with partially added carbon nanotube sensing materials in thermoplastic polyurethane elastic materials. Due to the superior interface compatibility and the change in the conductive path during stretching, the fiber strain sensor exhibits excellent durability (5000 tensile cycles), high sensitivity (>104), large stretchability (500%), a low detection limit (0.01%), and a fast response time of ∼60 ms. Based on these outstanding strain sensing performances, the fiber sensor is demonstrated to detect subtle strain changes (e.g., pulse wave and swallowing) and large strain changes (e.g., finger joint and wrist movement) in real time. Moreover, the fabric sensor woven with the core-sheath fibers has an excellent performance in wrist bending angle detection, and the smart gloves based on the fabric sensors also show exceptional recognition ability as a wireless sign language translation device. This integrated strategy may provide prospective opportunities to develop highly sensitive strain sensors with durable deformation and a wide detection range

Crack-Based Core-Sheath Fiber Strain Sensors with an Ultralow Detection Limit and an Ultrawide Working Range

With the booming development of flexible wearable sensing devices, flexible stretchable strain sensors with crack structure and high sensitivity have been widely concerned. However, the narrow sensing range has been hindering the development of crack-based strain sensors. In addition, the existence of the crack structure may reduce the interface compatibility between the elastic matrix and the sensing material. Herein, to overcome these problems, integrated core-sheath fibers were prepared by coaxial wet spinning with partially added carbon nanotube sensing materials in thermoplastic polyurethane elastic materials. Due to the superior interface compatibility and the change in the conductive path during stretching, the fiber strain sensor exhibits excellent durability (5000 tensile cycles), high sensitivity (>104), large stretchability (500%), a low detection limit (0.01%), and a fast response time of ∼60 ms. Based on these outstanding strain sensing performances, the fiber sensor is demonstrated to detect subtle strain changes (e.g., pulse wave and swallowing) and large strain changes (e.g., finger joint and wrist movement) in real time. Moreover, the fabric sensor woven with the core-sheath fibers has an excellent performance in wrist bending angle detection, and the smart gloves based on the fabric sensors also show exceptional recognition ability as a wireless sign language translation device. This integrated strategy may provide prospective opportunities to develop highly sensitive strain sensors with durable deformation and a wide detection range

Hierarchically Designed Three-Dimensional Composite Structure on a Cellulose-Based Solar Steam Generator

The emerging water purification technology represented by solar water evaporation has developed rapidly in recent years and is widely used in seawater desalination. However, the high reflectivity of sunlight and low efficiency of photothermal conversion greatly hinder its application prospects. In this paper, the hierarchical structure of the film was designed and optimized by the addition of carbon materials in the process of bacterial cellulose culture. A cellulose-based composite film material with a microporous structure was obtained, which can improve the photothermal evaporation rate and photothermal conversion efficiency from the structural principle to improve the stability of floating on the water. Bacterial cellulose (BC) as a three-dimensional carrier was combined with one-dimensional and two-dimensional (1D/2D) compounds of carbon nanotubes (CNT) and reduced graphene oxide (RGO) to form composite films for solar evaporation. By the addition of CNT–RGO (21.8 wt %), the composite showed prominent photothermal evaporation rate and photothermal conversion efficiency properties. Through in situ culture of BC, not only a tight structure can be obtained but also the surface of BC contains a large number of hydroxyl groups, which have many active sites to load photothermal materials. BC nanofibers, CNT, and RGO cooperate to form a porous network structure, which provides continuous double channels for the rapid transmission of water molecules and light paths, so as to form an excellent photothermal layer. The photothermal conversion efficiency is 90.2%, and the photothermal evaporation rate is 1.85 kg m–2 h–1 to achieve efficient solar interface evaporation. This is a high level of photothermal properties in a cellulose-based solar steam generator. The superior photothermal performance of this hybrid film possesses scalability and desalination ability