Additional file 2: of Eye damage due to cosmetic ultrasound treatment: a case report

Table S1. Optical Quality Analysis System (OQAS) at one-month follow-up, indicating comparable worse vision quality in the right eye. (DOCX 92 kb

Additional file 3: of Eye damage due to cosmetic ultrasound treatment: a case report

Table S2. Intraocular pressure (IOP) and uncorrected visual acuity (VA) and best-corrected visual acuities (BCVAs) of this patient. OD: right eye. OS: left eye. (DOCX 30 kb

Additional file 1: of Eye damage due to cosmetic ultrasound treatment: a case report

Figure S1. Anterior segment optical coherence tomography (ASOCT) showed shallow anterior chambers at superior in the left eye. (TIF 2916 kb

Facile in situ fabrication of a direct Z-scheme BiOCl/bismuth niobate heterojunction and its effective photodegradation of RhB

Bismuth-based photocatalytic technology has been a promising way to degrade contaminants in the aqueous system. In this work, a direct Z-scheme BiOCl/Bi3NbO7 heterojunction with a different molar ratio of Bi and Nb elements was fabricated through a facile in situ growth method. The structural and photoelectric characteristics of these as-prepared samples were investigated by SEM, XPS, TEM, XRD, BET, UV-vis DRS, PL, EIS and TPC. The photocatalytic activity was evaluated by the degradation of RhB, and its mechanism was analyzed by the active species trapping experiments and DFT calculation. The results showed that compared with other as-prepared samples, BN-4 had the highest activity for RhB degradation with the value of the rate constant (k) being 0.01664 min−1. The reason that might be those different molar ratios of Bi and Nb elements in BiOCl/Bi3NbO7 heterojunction would impact the interface structure. And an appropriate molar ratio of that could bring a lower interface resistance that enhances the photocatalytic activity. The •OH and •O2− were the main active substances during the RhB photocatalytic process, and a reasonable degradation pathway was proposed.</p

High-Sensitivity and Environmentally Friendly Humidity Sensors Deposited with Recyclable Green Microspheres for Wireless Monitoring

The reliable, high-sensitive, wireless, and affordable requirements for humidity sensors are needed in high-precision measurement fields. Quartz crystal microbalance (QCM) based on the piezoelectric effect can accurately detect the mass changes at the nanogram level. However, water-capture materials deposited on the surface of QCM generally show disadvantages in either cost, sensitivity, or recyclability. Herein, novel QCM-based humidity sensors (NQHSs) are developed by uniformly depositing green microspheres (GMs) of natural polymers prepared by the chemical synthesis of the emulsification/inner gel method on QCM as humidity-sensitive materials. The NQHSs demonstrate high accuracy and sensitivity (27.1 Hz/% RH) owing to the various hydrophilic groups and porous nano-3D deposition structure. Compared with the devices deposited with a smooth film, the frequency of the NQHSs shows almost no changes during the cyclic test and exhibits long-term stability. The NQHSs have been successfully applied to non-contact sensing human activities and remote real-time humidity monitoring via Bluetooth transmission. In addition, the deposited humidity-sensitive GMs and QCM substrate are fully recycled and reused (72% of the original value). This work has provided an innovative idea to construct environmental-friendly, high-sensitivity, and wireless humidity sensors

High-Sensitivity and Environmentally Friendly Humidity Sensors Deposited with Recyclable Green Microspheres for Wireless Monitoring

The reliable, high-sensitive, wireless, and affordable requirements for humidity sensors are needed in high-precision measurement fields. Quartz crystal microbalance (QCM) based on the piezoelectric effect can accurately detect the mass changes at the nanogram level. However, water-capture materials deposited on the surface of QCM generally show disadvantages in either cost, sensitivity, or recyclability. Herein, novel QCM-based humidity sensors (NQHSs) are developed by uniformly depositing green microspheres (GMs) of natural polymers prepared by the chemical synthesis of the emulsification/inner gel method on QCM as humidity-sensitive materials. The NQHSs demonstrate high accuracy and sensitivity (27.1 Hz/% RH) owing to the various hydrophilic groups and porous nano-3D deposition structure. Compared with the devices deposited with a smooth film, the frequency of the NQHSs shows almost no changes during the cyclic test and exhibits long-term stability. The NQHSs have been successfully applied to non-contact sensing human activities and remote real-time humidity monitoring via Bluetooth transmission. In addition, the deposited humidity-sensitive GMs and QCM substrate are fully recycled and reused (72% of the original value). This work has provided an innovative idea to construct environmental-friendly, high-sensitivity, and wireless humidity sensors

High-Sensitivity and Environmentally Friendly Humidity Sensors Deposited with Recyclable Green Microspheres for Wireless Monitoring

The reliable, high-sensitive, wireless, and affordable requirements for humidity sensors are needed in high-precision measurement fields. Quartz crystal microbalance (QCM) based on the piezoelectric effect can accurately detect the mass changes at the nanogram level. However, water-capture materials deposited on the surface of QCM generally show disadvantages in either cost, sensitivity, or recyclability. Herein, novel QCM-based humidity sensors (NQHSs) are developed by uniformly depositing green microspheres (GMs) of natural polymers prepared by the chemical synthesis of the emulsification/inner gel method on QCM as humidity-sensitive materials. The NQHSs demonstrate high accuracy and sensitivity (27.1 Hz/% RH) owing to the various hydrophilic groups and porous nano-3D deposition structure. Compared with the devices deposited with a smooth film, the frequency of the NQHSs shows almost no changes during the cyclic test and exhibits long-term stability. The NQHSs have been successfully applied to non-contact sensing human activities and remote real-time humidity monitoring via Bluetooth transmission. In addition, the deposited humidity-sensitive GMs and QCM substrate are fully recycled and reused (72% of the original value). This work has provided an innovative idea to construct environmental-friendly, high-sensitivity, and wireless humidity sensors

High-Sensitivity and Environmentally Friendly Humidity Sensors Deposited with Recyclable Green Microspheres for Wireless Monitoring

The reliable, high-sensitive, wireless, and affordable requirements for humidity sensors are needed in high-precision measurement fields. Quartz crystal microbalance (QCM) based on the piezoelectric effect can accurately detect the mass changes at the nanogram level. However, water-capture materials deposited on the surface of QCM generally show disadvantages in either cost, sensitivity, or recyclability. Herein, novel QCM-based humidity sensors (NQHSs) are developed by uniformly depositing green microspheres (GMs) of natural polymers prepared by the chemical synthesis of the emulsification/inner gel method on QCM as humidity-sensitive materials. The NQHSs demonstrate high accuracy and sensitivity (27.1 Hz/% RH) owing to the various hydrophilic groups and porous nano-3D deposition structure. Compared with the devices deposited with a smooth film, the frequency of the NQHSs shows almost no changes during the cyclic test and exhibits long-term stability. The NQHSs have been successfully applied to non-contact sensing human activities and remote real-time humidity monitoring via Bluetooth transmission. In addition, the deposited humidity-sensitive GMs and QCM substrate are fully recycled and reused (72% of the original value). This work has provided an innovative idea to construct environmental-friendly, high-sensitivity, and wireless humidity sensors

High-Sensitivity and Environmentally Friendly Humidity Sensors Deposited with Recyclable Green Microspheres for Wireless Monitoring

The reliable, high-sensitive, wireless, and affordable requirements for humidity sensors are needed in high-precision measurement fields. Quartz crystal microbalance (QCM) based on the piezoelectric effect can accurately detect the mass changes at the nanogram level. However, water-capture materials deposited on the surface of QCM generally show disadvantages in either cost, sensitivity, or recyclability. Herein, novel QCM-based humidity sensors (NQHSs) are developed by uniformly depositing green microspheres (GMs) of natural polymers prepared by the chemical synthesis of the emulsification/inner gel method on QCM as humidity-sensitive materials. The NQHSs demonstrate high accuracy and sensitivity (27.1 Hz/% RH) owing to the various hydrophilic groups and porous nano-3D deposition structure. Compared with the devices deposited with a smooth film, the frequency of the NQHSs shows almost no changes during the cyclic test and exhibits long-term stability. The NQHSs have been successfully applied to non-contact sensing human activities and remote real-time humidity monitoring via Bluetooth transmission. In addition, the deposited humidity-sensitive GMs and QCM substrate are fully recycled and reused (72% of the original value). This work has provided an innovative idea to construct environmental-friendly, high-sensitivity, and wireless humidity sensors

The injuries of spleen and intestinal immune system induced by 2-Gy ⁶⁰Co <b>γ</b>-ray whole-body irradiation

The aim of the present study was to investigate the injuries of spleen and intestinal immune system induced by 2 Gy 60Co γ ray in mice. A total of 120 Balb/c mice were randomly divided into two groups: blank control (Ctrl) and model (IR). The IR mice were exposed to a single dose of total body irradiation (2 Gy, dose rate: 1 Gy/min) and sacrificed on 1st, 3rd, 7th, 14th and 21st day after irradiation. The indicators including general observations and body weight, the changes in peripheral hemogram, spleen index, histopathology examination and lymphocyte subsets of spleen. As well as the count and subsets of lymphocyte in gut-associated lymphoid tissue. Compared with the Ctrl group, the body weight, spleen index, peripheral blood cell and splenocyte amounts, intraepithelial lymphocytes number decreased significantly after exposure, accompanied by a notable decreased count of lymphocytes in Peyer’s patch and mesenteric lymph nodes. Moreover, ionizing radiation also broke the balance of CD4+/CD8+ and increased the Treg proportion in spleen, which then triggered immune imbalance and immunosuppression. In general, the spleen injuries occurred on 1st day after exposure, worse on 3rd day, and were relieved on 7th day. The intestinal immune injuries were observed on 1st day, and attenuated on 3rd day. On 21st day after exposure, the spleen volume and index have returned to normal, except for the distribution of lymphocyte subpopulations. Furthermore, all indicators of gut-associated lymphoid tissue, except for mesenteric lymph nodes lymphocyte count, had returned to normal levels on 21st day. In conclusion, our data showed the injuries of spleen and intestinal immune system induced by 2 Gy 60Co γ ray whole-body irradiation. These findings may provide the bases for further radiation protection in the immunity.</p