Volumetric measurements of a self-similar adverse pressure gradient turbulent boundary layer using single-camera light-field particle image velocimetry

As a novel volumetric particle image velocimetry technique, single-camera light-field PIV (LF-PIV) is able to reconstruct three-dimensional flow fields with a single camera. The merits of LF-PIV lie in its concise hardware setup and minimum optical access requirement, its capability has been proved in many flow scenarios. In this study, LF-PIV is used to measure a self-similar adverse pressure gradient turbulent boundary layer (APG-TBL). Experiments were performed in a large water tunnel at the Laboratory for Turbulence Research in Aerospace and Combustion (LTRAC), Monash University. 20 independent batches of light-field PIV images were captured for both inner and outer flow, each consisting of 250 instantaneous image pairs. Instantaneous 3D velocity fields were reconstructed with the GPU accelerated DRT-MART and 3D cross-correlation methods and compared with two-dimensional PIV (2D-PIV) results. Initial results show that though limited by the experiment conditions and PIV algorithms developed in 2016, we still can have similar accuracy to 2D-PIV near and above the boundary layer. With the volumetric calibration method that compensates optical distortions caused by lens defect and misalignment between the micro-lens array (MLA) and image sensor, the resolution of LF-PIV is sure to have a large improvement.Fluid Mechanic

Design and assessments on a hybrid pin fin-metal foam structure towards enhancing melting heat transfer: An experimental study

Solar energy, as a kind of renewable energy, offers a large reserve to be harvested at a reasonably low cost for engineering applications. To decouple the temporal and spatial relevance of the continuous energy supply of solar energy, latent heat thermal energy storage can deal with this problem at different temperatures. Aiming to improve energy efficiency, a novel hybrid metal foam-pin fin structure is designed and assessed. Upon conducting measurements on a well-designed experimental bench, the phase change processes of paraffin that is filled in fins, metal foam, and a combination of both (hybrid structure) are evaluated. During the experiments, the transient melting interface is snapshotted and temperature development is documented under five different heat source temperatures of 61 °C, 63 °C, 65 °C, 68 °C, and 70 °C. In the foreground of the novel hybrid structure, each segment of the hybrid is also justified and discussed. Results indicate that the hybrid structure augments marked heat transfer. Compared to pure PCM, complete melting time decreases by 63.4% and simultaneously the temperature response rate increases by 143.9% as implementing the hybrid. Attempts to design hybrid structure find a solution to assess and operate thermal storage applications for solar engineering.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Process and Energ

Comparative performance of different scale-down simulators of substrate gradients in Penicillium chrysogenum cultures: the need of a biological systems response analysis

In a 54 m3 large-scale penicillin fermentor, the cells experience substrate gradient cycles at the timescales of global mixing time about 20–40 s. Here, we used an intermittent feeding regime (IFR) and a two-compartment reactor (TCR) to mimic these substrate gradients at laboratory-scale continuous cultures. The IFR was applied to simulate substrate dynamics experienced by the cells at full scale at timescales of tens of seconds to minutes (30 s, 3 min and 6 min), while the TCR was designed to simulate substrate gradients at an applied mean residence time ((Formula presented.)) of 6 min. A biological systems analysis of the response of an industrial high-yielding P. chrysogenum strain has been performed in these continuous cultures. Compared to an undisturbed continuous feeding regime in a single reactor, the penicillin productivity (qPenG) was reduced in all scale-down simulators. The dynamic metabolomics data indicated that in the IFRs, the cells accumulated high levels of the central metabolites during the feast phase to actively cope with external substrate deprivation during the famine phase. In contrast, in the TCR system, the storage pool (e.g. mannitol and arabitol) constituted a large contribution of carbon supply in the non-feed compartment. Further, transcript analysis revealed that all scale-down simulators gave different expression levels of the glucose/hexose transporter genes and the penicillin gene clusters. The results showed that qPenG did not correlate well with exposure to the substrate regimes (excess, limitation and starvation), but there was a clear inverse relation between qPenG and the intracellular glucose level.ChemE/Transport PhenomenaOLD BT/Cell Systems EngineeringBT/Bioprocess Engineerin