Elaboration and characterization of nanoplate structured alpha-Fe2O3 films by Ag3PO4

A new strategy for surface treatment of hematite nanoplates for efficient photoelectrochemical (PEC) performances is proposed. Silver orthophosphate (Ag₃PO₄) has been adopted to mediate the formation of α-Fe₂O₃ films. Phosphate ions in Ag₃PO₄ is found to cause a significant morphology change during annealing process, from β-FeOOH nanorod arrays to hematite nanoplates. Meanwhile, Ag ions is doped into α-Fe₂O₃ film. The obtained nanoplate structured Fe₂O₃ –Ag–P films demonstrate much higher photoelectrochemical performance as photoanodes than the bare Fe₂O₃ nanorod thin films. The effects of phosphate and silver ions on the morphology, surface characteristics and the PEC properties of the photoanodes are investigated

Numerical simulation and experimental study of PbWO4/EPDM and Bi2WO6/EPDM for the shielding of {\gamma}rays

The MCNP5 code was employed to simulate the {\gamma}ray shielding capacity of tungstate composites. The experimental results were applied to verify the applicability of the Monte Carlo program. PbWO4 and Bi2WO6 were prepared and added into ethylene propylene diene monomer (EPDM) to obtain the composites, which were tested in the {\gamma}ray shielding. Both the theoretical simulation and experiments were carefully chosen and well designed. The results of the two methods were found to be highly consistent. In addition, the conditions during the numerical simulation were optimized and double-layer {\gamma}ray shielding systems were studied. It was found that the {\gamma}-ray shielding performance can be influenced not only by the material thickness ratio but also by the arrangement of the composites.Comment: 8 pages,7 figures,Submitted to Chin.Phy.

In situ growth of ultrathin Co-MOF nanosheets on Α-Fe2O3 hematite nanorods for efficient photoelectrochemical water oxidation

Efficient charge transport is an important factor in photoelectrochemical (PEC) water splitting. The charge transfer at the semiconductor/electrolyte interface is of great importance, especially for the complex water oxidation reaction. In this study, we explored the feasibility of improving charge transfer efficiency at the interface of semiconductor/electrolyte by in situ growth of Co based Metal-Organic Frame work (Co-MOF) through a facile ion-exchanging method. Under optimized conditions, the Co-MOF nanosheet-modified hematite gave a photocurrent density of 2.0 mA cm−2 (200% improvement) at 1.23 VRHE with a cathodic shift of 180 mV in the photocurrent onset potential, in comparison to bare α-Fe2O3 (0.71 mA cm−[email protected] VRHE). To elucidate the role of Co-MOF, X-ray photoelectron spectroscopy, electrochemical impedance spectroscopy and Mott-Schottky measurements were carried out. It was found that the atomically distributed Co2+ in Co-MOF possessed excellent hole storage capability and charge transfer efficiency, as evidenced by the high surface capacitance and extremely low surface charge transfer resistance

PROPERTIES OF ELECTROMAGNETIC SHIELDING CASE MADE OF PLYWOOD LAMINATED WITH CONDUCTIVE SHEETS

ABSTRACT Electromagnetic shielding cases have been regarded as an adequate solution for electromagnetic interference problems. Most electromagnetic shielding cases are made of metal, conductive plastics and carbon materials. Wood-based electromagnetic shielding cases have gained high levels of public interests due to their availability, cost, and renewability. In this study, the case was constructed of electromagnetic shielding plywood connected by copper foil. Shielding properties of the case were evaluated using shielded room testing. It was found that shielding effectiveness of the case ranged from 30.01 to 43.89 dB (30 MHz to 1 GHz), which indicated it met the secondary shielding effectiveness requirements of general cases for electronic equipment and could be used under the high requirements of electromagnetic compatibility. The results also showed seam leakage between the sides of cases resulted in a decrease of electromagnetic shielding effectiveness. The longer the seam length, the lower the shielding performance was. In addition, it was observed that rectangular waveguide resonance had an obvious influence on the case, which led to a sharp decrease of shielding effectiveness at the frequency of 720 MHz

Anomalous stopping of laser-accelerated intense proton beam in dense ionized matter

Ultrahigh-intensity lasers (10$^{18}$-10$^{22}$W/cm$^{2}$) have opened up new perspectives in many fields of research and application [1-5]. By irradiating a thin foil, an ultrahigh accelerating field (10$^{12}$ V/m) can be formed and multi-MeV ions with unprecedentedly high intensity (10$^{10}$A/cm$^2$) in short time scale ($\sim$ps) are produced [6-14]. Such beams provide new options in radiography [15], high-yield neutron sources [16], high-energy-density-matter generation [17], and ion fast ignition [18,19]. An accurate understanding of the nonlinear behavior of beam transport in matter is crucial for all these applications. We report here the first experimental evidence of anomalous stopping of a laser-generated high-current proton beam in well-characterized dense ionized matter. The observed stopping power is one order of magnitude higher than single-particle slowing-down theory predictions. We attribute this phenomenon to collective effects where the intense beam drives an decelerating electric field approaching 1GV/m in the dense ionized matter. This finding will have considerable impact on the future path to inertial fusion energy.Comment: 8 pages, 4 figure

Energy loss enhancement of very intense proton beams in dense matter due to the beam-density effect

Thoroughly understanding the transport and energy loss of intense ion beams in dense matter is essential for high-energy-density physics and inertial confinement fusion. Here, we report a stopping power experiment with a high-intensity laser-driven proton beam in cold, dense matter. The measured energy loss is one order of magnitude higher than the expectation of individual particle stopping models. We attribute this finding to the proximity of beam ions to each other, which is usually insignificant for relatively-low-current beams from classical accelerators. The ionization of the cold target by the intense ion beam is important for the stopping power calculation and has been considered using proper ionization cross section data. Final theoretical values agree well with the experimental results. Additionally, we extend the stopping power calculation for intense ion beams to plasma scenario based on Ohm's law. Both the proximity- and the Ohmic effect can enhance the energy loss of intense beams in dense matter, which are also summarized as the beam-density effect. This finding is useful for the stopping power estimation of intense beams and significant to fast ignition fusion driven by intense ion beams

Target density effects on charge tansfer of laser-accelerated carbon ions in dense plasma

We report on charge state measurements of laser-accelerated carbon ions in the energy range of several MeV penetrating a dense partially ionized plasma. The plasma was generated by irradiation of a foam target with laser-induced hohlraum radiation in the soft X-ray regime. We used the tri-cellulose acetate (C$_{9}$H$_{16}$O$_{8}$) foam of 2 mg/cm$^{-3}$ density, and $1$-mm interaction length as target material. This kind of plasma is advantageous for high-precision measurements, due to good uniformity and long lifetime compared to the ion pulse length and the interaction duration. The plasma parameters were diagnosed to be T$_{e}$=17 eV and n$_{e}$=4 $\times$ 10$^{20}$ cm$^{-3}$. The average charge states passing through the plasma were observed to be higher than those predicted by the commonly-used semiempirical formula. Through solving the rate equations, we attribute the enhancement to the target density effects which will increase the ionization rates on one hand and reduce the electron capture rates on the other hand. In previsous measurement with partially ionized plasma from gas discharge and z-pinch to laser direct irradiation, no target density effects were ever demonstrated. For the first time, we were able to experimentally prove that target density effects start to play a significant role in plasma near the critical density of Nd-Glass laser radiation. The finding is important for heavy ion beam driven high energy density physics and fast ignitions.Comment: 7 pages, 4 figures, 35 conference